MINIX Magnetic M.2 2230 NVMe SSD Enclosure - Instruction Manual

Производ је завршенview

The MINIX Magnetic M.2 2230 NVMe SSD Enclosure (Model MSE01) is a versatile external storage solution designed for high-speed data transfer and expanded storage capacity across various devices. It features magnetic attachment for convenience and multi-port connectivity for enhanced functionality.

Кључне карактеристике:

• Пренос података од 10 Гбпс: Equipped with a USB3.2 Gen2 Type-C port, supporting read/write speeds up to 1000-1200MB/s for efficient data transfer and 4K ProRes video recording.
• Broad SSD Compatibility: Supports NVMe (B+M Key/M Key) and SATA protocol SSDs in sizes 2230/2242/2260/2280mm, with capacity expansion up to 2TB (4TB for Windows laptops).
• Multi-Port Connectivity: Includes a USB-C PD3.0 port (up to 60W), a USB-C 2.0 port for data/audio/mic, and a 3.5mm audio jack.
• Широка компатибилност уређаја: Compatible with iPhone 15 Pro/Pro Max, iPad Pro, MacBook Pro/Air, and Windows laptops.
• Secure Magnetic Suction: Features built-in magnets for secure attachment to compatible devices, preventing accidental falls.

Шта је у кутији

• MINIX Magnetic M.2 SSD Enclosure (MSE01)
• Упутство за употребу
• УСБ-Ц на УСБ-Ц кабл
• Heat Dissipation Silicone x 2
• Сцрев
• Шрафцигер

Image: Contents of the MINIX SSD Enclosure retail box, showing the enclosure, USB-C cable, heat dissipation pads, screw, and screwdriver.

Setup and SSD Installation

Пратите ове кораке да бисте инсталирали M.2 SSD у кућиште:

1. Отворите кућиште: Gently slide open the enclosure to reveal the internal M.2 slot.
2. Уметните SSD: Carefully insert your M.2 NVMe or SATA SSD (2230/2242/2260/2280mm) into the designated slot. Ensure it is properly seated.
3. Безбедан SSD: Use the provided screw and screwdriver to secure the SSD in place.
4. Нанесите термални јастучић: Place the heat dissipation silicone pad on top of the installed SSD to aid in cooling.
5. Затвори прилог: Slide the enclosure cover back until it clicks securely into place.

Слика: Експлодирана view of the MINIX SSD Enclosure demonstrating SSD installation, showing compatibility with M Key and B+M Key SSDs in 2230, 2242, 2260, and 2280mm sizes.

Image: Visual guide for formatting a new SSD on a Windows operating system using the Disk Management tool, showing steps to create a new simple volume and format it with exFAT.

Упутство за употребу

Повезивање са уређајима:

• For iPhone 15 Pro/Pro Max: Use the provided USB-C to USB-C cable to connect the enclosure to your iPhone. The magnetic feature allows for secure attachment to the back of the phone.
• For iPad Pro/MacBook/Laptops: Connect the enclosure using the USB-C to USB-C cable to the appropriate USB-C port on your device.
• Испорука струје: If using high-capacity SSDs or requiring simultaneous charging, connect an additional Type-C charging cable to the PD 60W port on the enclosure.

Пренос и складиштење података:

• Once connected, your device should recognize the SSD enclosure as external storage.
• You can directly record 4K ProRes videos from compatible iPhones to the SSD, saving internal device storage.
• Трансфер files between the SSD and your computer/tablet as needed.

Аудио функционалност:

• The enclosure includes a 3.5mm audio jack and a USB-C 2.0 audio port for connecting headphones or microphones.

Image: The MINIX SSD Enclosure magnetically attached to the back of an iPhone 15 Pro Max, with its short USB-C cable connected to the phone's port, illustrating direct storage for ProRes video.

Image: The MINIX SSD Enclosure connected to a MacBook, with blue light trails indicating high-speed data transfer, showing read and write speeds of approximately 915 MB/s.

Image: The MINIX SSD Enclosure connected to an iPhone, with a separate USB-C cable plugged into its PD 60W port, indicating simultaneous device charging while in use.

Званични видео снимци производа:

Спецификације

Решавање проблема

• Device Not Recognizing SSD:
  • Ensure the SSD is correctly installed and secured within the enclosure.
  • Verify the USB-C cable is securely connected to both the enclosure and your device.
  • For new SSDs, ensure it is formatted correctly (e.g., exFAT for broad compatibility). Refer to the "Setup and SSD Installation" section for Windows formatting steps.
  • If using with an iPhone, ensure it is an iPhone 15 Pro/Pro Max model or newer, as older models may not support external recording or high-speed data transfer.
  • If using a high-capacity SSD (e.g., 2TB or more), ensure external power is supplied to the enclosure via the PD port.
• Споре брзине преноса података:
  • Ensure your device's USB-C port supports USB 3.2 Gen 2 (10Gbps) speeds.
  • Use the provided high-quality USB-C to USB-C cable.
  • Check if other applications or processes are consuming significant bandwidth on your device.
• Проблеми са магнетним причвршћивањем:
  • Ensure your device or phone case is MagSafe compatible for optimal magnetic hold.
  • Clean the magnetic surfaces on both the enclosure and your device/case to ensure a strong connection.

Одржавање

• Чишћење: Use a soft, dry cloth to clean the exterior of the enclosure. Avoid liquid cleaners.
• Складиштење: Кутију чувајте на хладном и сувом месту, даље од директне сунчеве светлости и екстремних температура.
• Руковање: While durable, avoid dropping or subjecting the enclosure to strong impacts to protect the internal SSD.

Гаранција и подршка

For warranty information, technical support, or further assistance, please refer to the official MINIX website or contact MINIX customer service directly.

Посетите MINIX Store on Amazon за више производа и ресурса за подршку.