Производ је завршенview
The Lepro RGB LED Strip Lights are designed to provide vibrant, color-changing illumination for various indoor applications. This 16.4ft (5m) flexible strip features 150 5050 SMD LEDs, offering primary Red, Green, Blue (RGB) colors, white, and 16 multicolored options. It comes with a 44-key IR remote controller and a 24V power adapter for easy plug-and-play setup. These lights are ideal for enhancing the ambiance of living rooms, bedrooms, dining rooms, kitchens, desks, cabinets, and are particularly suitable for holiday decorations.

Image: Complete kit of Lepro RGB LED Strip Lights, showing the coiled strip, remote control, and power supply.
Key features include ultra-high brightness, a wide range of color options with DIY customization, 8 lighting modes, and adjustable brightness levels. The strip utilizes strong 3M adhesive for easy installation, complemented by extra mounting brackets/fixing clips to ensure secure placement.

Слика: прamples of the LED strip lights installed in different home environments, such as behind a TV, under kitchen cabinets, and along a bar counter.
Шта је у кутији
- 1x 150 SMD 5050 LEDs 16.4ft/5m non-waterproof RGB strip
- 1x 44 key IR remote controller
- 1x 2A 12V power adapter (US Plug)
- Extra mounting brackets/fixing clips
Водич за подешавање
Пратите ове кораке за правилну инсталацију ЛЕД траке:
- Припремите површину: Ensure the surface where you intend to install the strip lights is clean, dry, and smooth. Wipe it thoroughly to remove any dust or debris.
- Нанесите траку: Peel off the backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the desired surface, applying firm and even pressure along its entire length.
- Cut to Length (Optional): If the strip is too long for your application, you can cut it at designated cutting marks (usually indicated by a copper line and a scissor icon). Do not cut at any other point, as this may damage the strip.
- Причврстите копчама: For added security, especially on textured surfaces or in areas where the adhesive might weaken over time, use the provided fixing clips. Space them evenly along the strip and secure them with small screws or appropriate fasteners.
- Прикључите напајање: Connect the LED strip to the IR receiver, and then connect the IR receiver to the 12V power adapter. Plug the power adapter into a standard electrical outlet.

Image: Visual instructions demonstrating the installation process, from preparing the surface to securing the strip with clips.

Image: Detail showing the strong 3M adhesive on the back of the strip and the included fixing clips for enhanced stability.
Упутство за употребу
Your Lepro RGB LED Strip Lights are controlled by the included 44-key IR remote. Ensure the remote is pointed directly at the IR receiver connected to the LED strip for optimal performance.

Image: The 44-key remote control, detailing its various functions for color selection, brightness adjustment, and mode changes.
Функције даљинског управљача:
- Укључивање/искључивање: Use the red and green buttons at the top right to turn the lights on or off.
- Подешавање осветљености: The two arrow buttons (up/down) below the power buttons control the brightness (5 levels available).
- Статичке боје: Select from 20 static colors using the color grid buttons.
- DIY Colors: Use the DIY1-DIY6 buttons to create and save your custom colors. Press a DIY button, then use the R/G/B up/down arrows to adjust the color, and press the DIY button again to save.
- Динамички режими: Choose from 8 dynamic modes (e.g., Flash, Strobe, Fade, Smooth) using the buttons on the bottom right.
- Подешавање брзине: For dynamic modes, use the 'QUICK' and 'SLOW' buttons to adjust the transition speed (5 levels available).
Одржавање и њега
To ensure the longevity and optimal performance of your Lepro RGB LED Strip Lights, follow these maintenance guidelines:
- Чишћење: Gently wipe the LED strip with a dry, soft cloth to remove dust. Avoid using liquid cleaners or abrasive materials.
- Отпорност на воду: Овај производ је није водоотпоран. Avoid exposing the LED strip, power adapter, or remote control to water or high humidity. Install only in indoor, dry environments.
- Руковање: Do not bend the LED strip sharply or apply excessive force, as this can damage the internal circuitry.
- Напајање: Always use the original power adapter provided with the kit. Using an incompatible power supply may damage the lights or pose a safety risk.
Решавање проблема
If you encounter issues with your LED strip lights, refer to the following common solutions:
- Светла се не пале:
- Check all connections to ensure they are secure between the LED strip, IR receiver, and power adapter.
- Verify that the power adapter is properly plugged into a working electrical outlet.
- Ensure the remote control has working batteries and is pointed directly at the IR receiver.
- Важан савет: If the lights are not working or not displaying colors correctly, ensure the 4-pin connector from the LED strip is inserted correctly into the IR receiver. Sometimes, the pins may be inserted backward. If this is the case, try unplugging and re-inserting the connector in the opposite orientation. After re-inserting, press the 'Blue' color button, then the 'Power' button, and then the 'Fade 7' button on the remote repeatedly until the lights function correctly.
- Даљински не реагује:
- Замените батерију у даљинском управљачу.
- Ensure there are no obstructions between the remote and the IR receiver.
- Colors Not Matching Remote:
- This can often be resolved by re-calibrating the remote. Try the 'Important Tip' mentioned above (Blue button, Power button, Fade 7 repeatedly).
Спецификације производа
| Спецификација | Детаљ |
|---|---|
| Број модела | 410082-RGB-US |
| Боја | РГБ (црвена, зелена, плава) |
| Бранд | Лепро |
| Унутрашња/спољна употреба | Индоор |
| Посебна карактеристика | Adjustable, Color Changing |
| Тип извора светлости | ЛЕД |
| Извор напајања | Цордед Елецтриц |
| Лигхт Цолор | РГБ |
| Материјал | Бакар, пластика |
| Тип контролера | Ремоте Цонтрол |
| Технологија повезивања | Инфрацрвени |
| Број извора светлости | 150 |
| Волtage | 12 Волтс |
| Ватtage | 24 вати |
| Тежина артикла | 0.22 килограма (7.7 унци) |
| Димензије производа | 5.43 к 5.51 к 2.8 инча |
| Ниво отпорности на воду | Није водоотпоран |
| Батерије су потребне | 1 A battery (for remote) |
Гаранција и подршка
Lepro products are designed for quality and reliability. For specific warranty information regarding your LED Strip Lights, please refer to the documentation included with your purchase or visit the official Lepro webсајту.
For further assistance, technical support, or to explore other Lepro products, please visit the Lepro Store on Amazon.