Jectse Jectseh4tnewb30y-03
Jectse Timer Soft Starter Instruction Manual
Model: Jectseh4tnewb30y-03
1. Производ је готовview
The Jectse Timer Soft Starter is a versatile delay relay motor starter designed for efficient motor start control. It features adjustable delay ranges and wide working voltage compatibility, making it suitable for various industrial and scientific applications.
Слика 1: Предња страна view of the Jectse Timer Soft Starter, showing the control knobs and indicator lights.
2. Кључне карактеристике
- Adjustable Start Delay (T1): Range from 0.1 seconds to 10 minutes, set via knob.
- Adjustable Conversion Time (T2): Range from 0.1 seconds to 1 second, set via knob.
- Широка радна запреминаtage: Supports AC/DC 12V to 240V.
- ЛЕД индикатори: Clearly shows the working status of the relay.
- Компактан дизајн: Super small size, only 18mm wide, designed for 35mm rail mounting.
Figure 2: The soft starter unit highlighting its compact size and adjustable settings.
3. Безбедносне информације
Please read and understand all safety instructions before installing or operating this device. Failure to follow these instructions may result in electrical shock, fire, or serious injury.
- Уверите се да је напајање искључено пре било какве инсталације или ожичења.
- Инсталацију треба да обавља само квалификовано особље.
- Проверите тачан обимtage and current ratings before connecting to a power source.
- Не излажите уређај влази или екстремним температурама.
- Обезбедите правилно уземљење где је потребно.
4. Садржај пакета
Пакет укључује:
- 1 x Jectse Timer Soft Starter
5. Подешавање и инсталација
The Jectse Timer Soft Starter is designed for 35mm DIN rail mounting. Follow these steps for proper installation:
- Ensure all power to the circuit is turned off at the main breaker.
- Mount the soft starter securely onto a standard 35mm DIN rail. The red clips on the side facilitate easy mounting and removal.
- Connect the power supply to terminals A1 and A2. The device supports AC/DC 12-240V.
- Connect the motor control wiring to the output terminals (15, 16, 18, 25, 26, 28) as per your application's wiring diagram. Refer to the diagram on the side of the unit for specific connections.
- Ensure all wiring connections are secure and meet the specified wiring capacity (1x2.5mm² or 2x 1.5mm²).
- Двапут проверите све везе пре него што вратите напајање.
Слика 3: Крупни план view of the wiring terminals and the integrated wiring diagram on the unit.
Слика 4: Страна view illustrating the red clips for DIN rail mounting.
6. Упутство за употребу
Once installed and powered, the Timer Soft Starter operates based on its configured delay settings.
- Setting Start Delay (T1): Use the knob labeled 'T1' to adjust the initial start delay from 0.1 seconds to 10 minutes. This delay determines how long the soft starter waits before initiating the motor start sequence.
- Setting Conversion Time (T2): Use the knob labeled 'T2' to set the conversion time from 0.1 seconds to 1 second. This time is crucial for the smooth transition during the motor's soft start phase.
- ЛЕД индикатори:
- A green LED indicates the power status (Un).
- A red LED indicates the relay's working status (R).
Видео 1: Оверview of the Jectse Timer Soft Starter, demonstrating its features and appearance.
7. Одржавање
The Jectse Timer Soft Starter is designed for long-term reliability with minimal maintenance. However, regular checks can ensure optimal performance:
- Periodically inspect wiring connections for tightness and signs of wear or corrosion.
- Одржавајте уређај чистим и без прашине и остатака. Користите суву, меку крпу за чишћење.
- Уверите се да радно окружење остаје у наведеним опсезима температуре и влажности.
- Не покушавајте сами да отворите или поправите уређај. Обратите се квалификованом сервисеру.
КСНУМКС. Решавање проблема
If you encounter issues with your Timer Soft Starter, consider the following common problems and solutions:
| Проблем | Могући узрок | Решење |
|---|---|---|
| Unit not powering on (Green LED off) | No power supply; Incorrect wiring; Faulty unit. | Check power source; Verify A1/A2 wiring; Contact support if power is present and wired correctly. |
| Motor not starting after delay | Incorrect output wiring; Relay not activating; Motor issue. | Check output terminals (15, 16, 18, 25, 26, 28) connections; Observe red LED for relay status; Test motor independently. |
| Delay times are inaccurate | Knob settings incorrect; Environmental factors. | Re-adjust T1 and T2 knobs carefully; Ensure stable operating environment. |
If the problem persists after attempting these solutions, please contact Jectse customer support.
9. Спецификације
| Параметар | Валуе |
|---|---|
| Тип | AC/DC 12V~240V |
| Rated Control Power Supply Voltage | AC/DC 12-240V (50/60Hz) |
| Потрошња енергије | AC 0.7-3VA / DC 0.5-1.7W |
| Starting Delay (T1) | 0.1s - 10min |
| Conversion Delay (T2) | 0.1s - 1s |
| Сеттинг Аццураци | 5% |
| Поновите прецизност | 0.2% |
| Излаз | Two sets of conversion contacts 16A/AC250VAC |
| Minimum Switching Power | 500мВ |
| Мецханицал Лифе | 1 x 10,000,000 cycles |
| Electrical Life (Load) | 1,000,000 циклуса |
| Ресет Тиме | 200мс максимално |
| Температура радног окружења | -20°Ц ~ 55°Ц |
| Температура складиштења и транспорта | -35°Ц ~ 75°Ц |
| Инсталација | Монтажа на шину од 35 мм |
| Ниво заштите | ИП20 |
| Надморска висина инсталације | 2000 метара |
| Ниво загађења | 2 |
| Виринг Цапацити | 1x2.5mm² or 2x 1.5mm² |
| Димензије | 90 к 18 к 64 мм (3.5 к 0.7 к 2.5 инча) |
| У складу са стандардом | GB14048.5.IEC/EN 60255-1 |
| Тежина | Приближно 96г (3.4оз) |
10. Гаранција и подршка
For warranty information or technical support, please contact Jectse customer service. Keep your purchase receipt for any warranty claims.
Произвођач: Јецтсе
Број модела: Jectseh4tnewb30y-03
Датум прве доступности: 4. маја 2019. године
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.