eXtremeRate Dawn Programable Remap Kit for PS4 Controller Instruction Manual

1. Производ је готовview

The eXtremeRate Dawn Programable Remap Kit is designed to upgrade your existing PlayStation 4 (PS4) controller into a professional eSport elite controller. This kit adds four ergonomic, programmable back buttons, enhancing gameplay by allowing you to assign up to 15 different controller functions to these new buttons. This modification provides a competitive edge without requiring the purchase of an entirely new pro-level controller.

2. Компатибилност

This remap kit is compatible with PS4 Gen 2 controllers, specifically models JDM-040, JDM-050, and JDM-055. It is crucial to verify your controller's model number before proceeding with installation to ensure proper fit and functionality.

To check your controller's model, you will need to partially disassemble it. The model number is usually printed on the main circuit board inside the controller.

3. Садржај пакета

The eXtremeRate Dawn Programable Remap Kit includes the following components:

• Upgrade Board (Remap Board)
• Redesigned Back Shell with integrated button mounts
• 4 Back Buttons (K1, K2, K3, K4)
• Flexible Ribbon Cable
• Screwdriver and various screws for installation
• Prying tool

4. Водич за инсталацију

Installation of the eXtremeRate Dawn Remap Kit requires careful disassembly and reassembly of your PS4 controller. Soldering is optional, primarily for remapping L3 and R3 buttons. For a detailed visual guide, refer to the official installation video.

4.1. Видео водич за инсталацију

4.2. General Installation Steps (Summary)

1. Растављање контролера: Carefully open your PS4 controller using the provided tools.
2. Идентификујте модел: Confirm your controller is a compatible JDM-040, JDM-050, or JDM-055 model.
3. Install Remap Board: Integrate the upgrade board and flexible ribbon cable into the controller's internal structure. Follow the video guide closely for correct placement and connections.
4. Attach Back Shell: Replace the original back shell with the redesigned back shell, ensuring the new back buttons (K1, K2, K3, K4) are properly seated and aligned.
5. Сигурне компоненте: Fasten all components with the provided screws. Ensure no wires are pinched and all connections are secure.
6. Тест функционалност: Before fully closing the controller, perform a basic test to ensure all buttons and the remap function are working.

5. Operation: Remapping Back Buttons

The eXtremeRate Dawn Remap Kit allows you to program the four back buttons (K1, K2, K3, K4) to mimic other controller inputs, providing quick access to frequently used actions.

5.1. Assignable Buttons

A maximum of 15 buttons can be assigned to the back buttons. These include:

• X, O, Triangle, Square
• Up, Down, Left, Right (D-pad)
• Л1, Л2, Р1, Р2
• L3, R3 (Left and Right Stick Clicks)
• Дугме додирне табле

5.2. Remapping Procedure

The kit offers two methods for entering remapping mode:

1. Touch Sensor Activation: The kit includes a touch-sensitive area. Touching this area will activate remapping mode.
2. Комбинација дугмади: Alternatively, you can enter remapping mode by holding down the L1, R1, D-pad Down, and X buttons simultaneously for 5 seconds. This method is useful if you prefer not to use the touch sensor or if it is accidentally triggered.

Once in remapping mode, an indicator light will illuminate (typically blue). Press the back button you wish to program (K1, K2, K3, or K4), then press the standard controller button you want to assign to it. The indicator light will change (e.g., to red) to confirm the assignment. Exit remapping mode by repeating the activation step.

6. Одржавање

Proper care and cleaning will extend the lifespan of your eXtremeRate Dawn Remap Kit and controller.

6.1. Cleaning Plastic Components

It is recommended to clean plastic products with a wipe dampened with water. If alcohol is used, clean it with a wipe dampened with less than 70% alcohol and place it in a ventilated place to dry in time. Do not spray water or alcohol directly on the product surface. Do not use any other organic solvents for cleaning.

КСНУМКС. Решавање проблема

If you encounter issues with your eXtremeRate Dawn Remap Kit, consider the following troubleshooting steps:

• Дугмад не реагују: Ensure all ribbon cable connections are secure and properly seated. Recheck the installation video for correct component placement.
• Accidental Remapping: If the touch sensor is too sensitive or triggers unintentionally, consider disabling it by removing the touch foil during installation, or rely solely on the button combination for remapping.
• Controller Not Closing Properly: Verify that all internal components, especially the remap board and battery, are correctly aligned and not obstructing the shell. Avoid forcing the shell closed; gently adjust components until it fits.
• Double Input or Faulty Buttons: This may indicate a defective component. Contact eXtremeRate customer support for assistance or replacement parts.
• L3/R3 Remapping Issues: If you opted for soldering L3/R3 and experience problems, double-check your solder points for clean and secure connections.

8. Спецификације

9. Гаранција и подршка

eXtremeRate typically offers a warranty for their products. For specific warranty terms, duration, and support inquiries, please refer to the official eXtremeRate webсајт или директно контактирајте њихову корисничку службу. Сачувајте доказ о куповини за евентуалне рекламације по гаранцији.

За даљу помоћ, посетите eXtremeRate Store on Amazon или њихове званичне канале за подршку.