Ohaus NVT6200 Navigator Series Portable Balance Instruction Manual

1. Увод

The Ohaus Navigator Series Portable Balance, model NVT6200, is designed for accurate and repeatable weighing in various settings, including laboratory, industrial, and educational environments. This balance features fast stabilization, robust overload protection, and intuitive operation to enhance user efficiency and productivity.

Кључне карактеристике укључују:

• Fast stabilization time (less than one second).
• Overload protection up to four times its rated capacity.
• Touchless sensor for hands-free operation (zero, print, tare, change functions).
• Multiple weighing modes: Weighing, Parts Counting, Percent Weighing, Checkweighing.
• Multiple units of measure: g, kg, N, oz, ozt, dwt, lb, lb/oz, ct, grain.

Figure 1: Ohaus NVT6200 Navigator Series Portable Balance. This image shows the balance with its weighing pan and LCD display.

2. Подешавање

Follow these steps to set up your Ohaus NVT6200 Portable Balance:

1. Распакивање: Пажљиво извадите вагу и сву додатну опрему из амбалаже. Сачувајте амбалажу за будући транспорт или складиштење.
2. Пласман: Place the balance on a stable, level surface free from vibrations, drafts, and direct sunlight. Ensure the surface can support the weight of the balance and any items to be weighed.
3. Прикључак за напајање:
   • АЦ адаптер: Connect the supplied AC adapter to the balance's power input and then to a suitable power outlet.
   • Снага батерије: For portable use, install four "C" batteries (not included) into the battery compartment located on the underside of the balance. Ensure correct polarity.
4. Нивелисање: Use the adjustable feet and the spirit level (if present, typically near the display) to ensure the balance is perfectly level. Adjust the feet by turning them clockwise or counter-clockwise until the bubble in the spirit level is centered.
5. Почетно укључивање: Притисните тастер ОН/ОФФ button to turn on the balance. Allow a brief warm-up period for optimal performance.

3. Операција

This section outlines the basic operational procedures for the NVT6200 balance.

3.1 Основно мерење тежине

1. Turn on the balance by pressing the ОН/ОФФ дугме.
2. Wait for the display to show "0.00 g" (or the last used unit) and the stability indicator to appear.
3. Поставите предмет који треба мерити на средину мерне површине.
4. Read the stable weight value displayed on the LCD.
5. Remove the item from the pan.

3.2 Taring (Zeroing)

Да бисте измерили тежину предмета у контејнеру, користите функцију Тара:

1. Поставите празну посуду на мерну плочу.
2. Притисните тастер ТАРЕ button (or use the touchless sensor if configured). The display will return to "0.00 g".
3. Додајте предмет који треба мерити у посуду. На екрану ће се приказати нето тежина предмета.

3.3 Промена јединица за мерење тежине

The NVT6200 supports multiple weighing units. To change the unit:

• Притисните тастер УНИТ button (or use the touchless sensor if configured) repeatedly to cycle through the available units (g, kg, N, oz, ozt, dwt, lb, lb/oz, ct, grain).
• Stop when the desired unit is displayed.

3.4 Using Weighing Modes

The balance offers various application modes:

• Вагање: Стандардно мерење тежине.
• Бројање делова: For counting a large number of identical items based on a reference weight.
• Процентно пондерисање: For measuring the weight of a sampле као перценtagе референтне тежине.
• Checkweighing: For checking if a sample's weight falls within a specified target range.

Refer to the detailed user manual for specific instructions on configuring and using each weighing mode, typically accessed via a МОДЕ or ФУНЦТИОН дугме.

4. Одржавање

Proper maintenance ensures the longevity and accuracy of your Ohaus NVT6200 balance.

• Чишћење:
  • Увек искључите вагу из напајања пре чишћења.
  • Clean the weighing pan and housing with a soft cloth dampопрати благим детерџентом или водом.
  • Не користите абразивна средства за чишћење, раствараче или јаке хемикалије.
  • Ensure no liquid enters the balance housing.
• калибрација: Regular calibration with certified weights is recommended to maintain accuracy, especially after relocation or significant temperature changes. Refer to the full Ohaus manual for calibration procedures specific to the NVT6200 model.
• Складиштење: When not in use for extended periods, store the balance in a clean, dry, and stable environment. Engage the integrated shipping lock to protect the weighing cell during transportation or storage.

КСНУМКС. Решавање проблема

If you encounter issues with your NVT6200 balance, refer to the following common problems and solutions:

If the problem persists, contact Ohaus customer support or an authorized service center.

6. Спецификације

Technical specifications for the Ohaus NVT6200 Navigator Series Portable Balance:

• Модел: НВТ6200
• Максимални капацитет: 6200 грама
• Readability (Accuracy): 1 грама
• Величина посуде: 9.1 cm x 6.9 cm
• Тип приказа: ЛЦД
• Материјал: Stainless Steel (pan)
• Снага: AC Adaptor (Included) or 4 "C" Batteries (Not Included)
• Мерних јединица: g, kg, N, oz, ozt, dwt, lb, lb/oz, ct, grain
• Weighing Modes: Вагање, бројање делова, процентуално вагање, контролно вагање
• Таре опсег: Full Capacity by Subtraction
• Тежина артикла: Приближно 5 фунти

7. Гаранција и подршка

Ohaus products are manufactured under stringent quality standards. For warranty information and technical support, please refer to the official Ohaus website or contact your local Ohaus representative.

It is recommended to register your product to receive updates and support. Keep your purchase receipt as proof of purchase for warranty claims.

For further assistance, visit the official Ohaus webсајт: ввв.охаус.цом