S18AW3FF50 EZ-Beam S18 серија фотоелектрични сензор - упутство за употребу

1. Увод

This manual provides essential information for the installation, operation, and maintenance of the BANNER ENGINEERING S18AW3FF50 EZ-Beam S18 Series Photoelectric Sensor. This sensor is designed for reliable object detection in industrial environments, featuring a 50 mm range, 20-250VAC input, and SPST solid-state light operate output.

Figure 1: BANNER ENGINEERING S18AW3FF50 Photoelectric Sensor with coiled cable.

2. Подешавање и инсталација

Правилна инсталација је кључна за оптималне перформансе и безбедност. Пажљиво пратите ове кораке.

2.1 Распакивање и преглед

• Carefully remove the sensor from its packaging.
• Inspect the sensor for any visible damage that may have occurred during shipping.
• Проверите да ли су присутне све компоненте наведене у паковању.

2.2 Монтажа сензора

The S18AW3FF50 sensor is designed for easy mounting. Ensure the mounting surface is stable and free from excessive vibration.

1. Select a mounting location that provides clear line-of-sight for the sensor's detection range (50 mm).
2. Secure the sensor using appropriate mounting hardware (not included). The sensor features a threaded barrel for secure attachment.
3. Ensure the sensor is oriented correctly for the intended detection application.

Слика 2: Страна view of the S18AW3FF50 sensor, showing the threaded barrel and cable.

2.3 Електричне везе

УПОЗОРЕЊЕ: Disconnect all power before making electrical connections to prevent electric shock or damage to the equipment.

The S18AW3FF50 operates on 20-250VAC input and provides an SPST Solid-State Light Operate output. The sensor comes with a 2M (6.5FT) cable.

Connect the sensor wires to the control circuit according to the provided wiring diagram and local electrical codes. Ensure all connections are secure.

Figure 3: S18AW3FF50 sensor showing the cable with exposed wires for electrical connection.

3. Операција

Once installed and wired, the S18AW3FF50 sensor is ready for operation.

3.1 Укључивање

Apply power to the sensor (20-250VAC). The sensor will typically have an indicator LED (if present) to show power status and output state.

3.2 Detection Principle

The S18AW3FF50 is a photoelectric sensor operating in a fixed field mode. It emits a light beam and detects objects based on the reflection or interruption of this beam. The "Light Operate" output means the output will be active when light is received by the sensor (i.e., when an object is detected or not detected, depending on the specific fixed field configuration).

3.3 Range and Performance

The sensor has a specified detection range of 50 mm. Ensure that objects to be detected fall within this range for reliable operation. Environmental factors such as dust, moisture, and ambient light can affect performance.

4. Одржавање

The S18AW3FF50 sensor is designed for low maintenance. Regular checks can ensure long-term reliable operation.

4.1 Чишћење

• Periodically clean the sensor lens and housing to remove dust, dirt, or debris that may accumulate and interfere with detection.
• Use a soft, lint-free cloth and a mild cleaning solution if necessary. Avoid abrasive cleaners or solvents.

4.2 Преглед каблова и конекција

• Regularly inspect the sensor cable for any signs of wear, cuts, or damage.
• Check electrical connections to ensure they remain secure and free from corrosion.

КСНУМКС. Решавање проблема

This section provides solutions to common issues encountered with the S18AW3FF50 sensor.

6. Спецификације

Key technical specifications for the BANNER ENGINEERING S18AW3FF50 Photoelectric Sensor.

• Модел: С18АВ3ФФ50
• Серија: EZ-Beam S18 Series
• Опсег детекције: 50 мм
• Улазни волtage: 20-250ВАЦ
• Тип излаза: SPST Solid-State Light Operate
• Дужина кабла: 2М (6.5ФТ)
• Тип сензора: Photoelectric, Fixed Field
• Произвођач: БАНЕР ИНЖЕЊЕРИНГ
• ASIN: B07RZTBRLS
• Датум прве доступности: 3. децембра 2021. године

7. Гаранција и подршка

For warranty information and technical support, please contact BANNER ENGINEERING directly or refer to their official webсајту.

Политика враћања: The product may be subject to a return policy of 30 days for refund/replacement, as per the seller's terms.

Произвођач: БАНЕР ИНЖЕЊЕРИНГ

За даљу помоћ, посетите BANNER ENGINEERING official webсајту.