1. Увод
Thank you for choosing the Eglo 98187 Solar Wall Light. This outdoor spotlight is designed to provide illumination in garden areas, patios, or entrances where electrical wiring is not readily available. Featuring an integrated motion sensor and an external solar panel, it offers convenience, security, and energy efficiency. Please read this manual carefully before installation and use to ensure proper operation and longevity of your product.

Figure 1: Eglo 98187 Solar Wall Light in an outdoor setting.
2. Безбедносна упутства
- Ensure the product is installed on a stable surface and in a location where it will not be easily damaged.
- Do not attempt to modify or disassemble the light or solar panel. This may void the warranty and pose a safety risk.
- Keep the solar panel clean to ensure optimal charging performance.
- This product is designed for outdoor use and has an IP44 rating, meaning it is protected against solid objects larger than 1mm and splashing water from any direction. However, do not submerge it in water.
- Одложите батерије одговорно у складу са локалним прописима.
3. Садржај пакета
Пре почетка инсталације проверите да ли су све компоненте присутне:
- 1 x Eglo 98187 Solar Wall Light unit with integrated LED board
- 1 x External Solar Panel
- Прибор за монтажу (шрафови, зидни типлови)
- Упутство за употребу
4. Спецификације
| Бранд | ЕГЛО |
| Број модела | 98187 |
| Материјал | Пластика |
| Боја | Црно |
| Димензије производа (Д к Ш к В) | 15.5 к 11 к 14.5 цм |
| Тежина артикла | 510 грама |
| ИП Ратинг | ИП44 |
| Извор светлости | Интегрисана ЛЕД |
| Луминоус Флук | 150 лумена |
| Повер | 2 Ваттс |
| Температура боје | 3000 Келвина (топла бела) |
| Волtage | 1.2 Волтс |
| Батерија | 3 АА (укључено) |
| Посебне карактеристике | Motion Sensor, Water Resistant, Automatic On/Off |

Слика 2: Димензије производа.
5. Подешавање и инсталација
Follow these steps to install your Eglo 98187 Solar Wall Light:
- Изаберите локацију: Select a wall or surface for the light unit and a separate location for the solar panel. The solar panel requires direct sunlight for at least 6 hours daily to fully charge the battery. Avoid shaded areas.
- Mount the Light Unit:
- Mark the drilling points on the wall using the light unit as a template.
- Избушите рупе и уметните приложене зидне типлове.
- Secure the light unit to the wall using the provided screws.

Figure 3: Mounting points and switch on the light unit.
- Монтирајте соларну плочу:
- Position the solar panel in a location that receives maximum direct sunlight throughout the day.
- Mark and drill holes, then secure the solar panel bracket using the provided screws.
- Adjust the angle of the solar panel to optimize sun exposure.

Figure 4: Solar panel and light unit connection.
- Повежите соларну плочу: Plug the cable from the solar panel into the input port on the light unit. Ensure the connection is secure.
- Почетна наплата: Allow the solar panel to charge the battery for at least 24-48 hours in direct sunlight before first use to ensure optimal performance.

Слика 5: Дијаграм инсталације.
6. Упутство за употребу
The Eglo 98187 Solar Wall Light features a multi-function switch and an integrated motion sensor.
- Подешавања прекидача: Locate the switch on the back of the light unit (refer to Figure 3). It typically has three positions: AUTO, OFF, and ON.
- АУТО: This is the recommended setting. The light will automatically turn on at dusk when motion is detected within its range. It will turn off after a set period of no motion.
- ВАН: The light will remain off, regardless of motion or ambient light. Use this setting for storage or if you do not wish for the light to operate.
- НА: The light will remain continuously on at night until the battery drains or dawn breaks. This setting is not recommended for daily use as it will deplete the battery quickly.
- Сензор покрета: The integrated motion sensor has a detection angle of 90 degrees and a range of up to 8 meters. Ensure the sensor is not obstructed for optimal performance.
- Аутоматски рад: In AUTO mode, the light charges during the day via the solar panel. At night, it will activate when motion is detected, providing illumination for safety and convenience.

Слика 6: Предња страна view of the light unit with LED and motion sensor.
7. Одржавање
Regular maintenance ensures optimal performance and extends the lifespan of your solar wall light.
- Чишћење соларне плоче: Периодично обришите соларни панел меком крпомamp cloth to remove dust, dirt, or debris. A clean panel ensures efficient charging.
- Cleaning the Light Unit: Clean the light unit and motion sensor lens with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Замена батерије: The light uses 3 AA batteries. While included, these are typically rechargeable and designed for long-term use. If the light's performance significantly degrades over time (e.g., shorter illumination time), the rechargeable batteries may need replacement. Use only rechargeable AA batteries of the same type and capacity.
- Сезонска прилагођавања: In winter months or periods of reduced sunlight, ensure the solar panel is free of snow or ice and adjust its angle if necessary to capture maximum available light.
КСНУМКС. Решавање проблема
If your Eglo 98187 Solar Wall Light is not functioning as expected, try the following solutions:
- Светло се не пали ноћу:
- Уверите се да је прекидач постављен на АУТО.
- Verify the solar panel is clean and receiving at least 6 hours of direct sunlight daily.
- Check the connection cable between the solar panel and the light unit.
- The battery may be depleted. Allow several days of full sunlight charging.
- Motion sensor is not detecting:
- Ensure the sensor lens is clean and unobstructed.
- Verify the light is installed within the recommended detection range (up to 8 meters).
- Test the sensor by walking directly in front of it at night.
- Light stays on continuously or flashes:
- Уверите се да је прекидач постављен на АУТО, not ON.
- Insufficient charge can sometimes cause erratic behavior. Allow for more charging time.
9. Гаранција и подршка
EGLO products are manufactured to high-quality standards. For warranty information, please refer to the documentation provided at the time of purchase or visit the official EGLO website. If you encounter any issues that cannot be resolved using the troubleshooting guide, please contact EGLO customer support or your retailer for assistance.
EGLO Contact Information:
Молимо посетите ввв.егло.цом for regional contact details and support.