1. Увод
This manual provides detailed instructions for the installation, operation, and maintenance of the DiversiTech WS-1 Wet Switch Flood Detector.
1.1 Производ завршенview
The DiversiTech WS-1 Wet Switch is a reliable flood detection device designed to alert users to the presence of unwanted moisture. It is suitable for various applications where early detection of water leaks is critical.
1.2 Кључне карактеристике
- Једноставна инсталација.
- Highly durable construction.
- Designed for 24 VAC systems.
- Visual indicators for power and moisture detection.
- Integrated test and reset buttons.
Image of the DiversiTech WS-1 Wet Switch Flood Detector. The circular device features a white label with 'WET SWITCH FLOOD DETECTOR' prominently displayed. It includes two indicator lights: one for 'POWER ON' (green) and one for 'MOISTURE' (red/orange). Wiring instructions are visible, indicating '24 VAC RED BLACK' for power input and 'ORANGE WHITE GREEN' for the output signal. Two buttons are present: a red 'PUSH TO TEST' button and a green 'PUSH TO RESET' button. The model number WS-1 and US Patent No. 4,787,212 are also printed on the label. The device is manufactured by Diversitech Corporation in Duluth, GA.
2. Важне информације о безбедности
Read all instructions carefully before installation and operation. Failure to follow these instructions may result in property damage, injury, or death.
- Disconnect all power to the circuit before installing or servicing the device.
- Installation should be performed by a qualified technician in accordance with all local and national electrical codes.
- Не излажите уређај екстремним температурама или директној сунчевој светлости током дужег периода.
- Ensure the device is installed in a location where it can effectively detect moisture without being accidentally triggered.
3. Водич за инсталацију
Follow these steps for proper installation of your Wet Switch Flood Detector:
- Искључивање напајања: Ensure the main power supply to the area where the detector will be installed is turned off at the circuit breaker.
- Локација монтаже: Select a flat, stable surface at the lowest point where water is likely to accumulate. Ensure the sensor pads on the bottom of the device can make direct contact with any pooling water.
- Ожичење:
- Connect the 24 VAC power supply wires to the detector. The red wire typically connects to the positive (+) 24 VAC terminal, and the black wire connects to the common (-) 24 VAC terminal. Refer to the device label for specific wiring details: "24 VAC RED BLACK".
- Connect the output signal wires (Orange, White, Green) to your control system or alarm panel as required. The specific function of each wire (e.g., normally open, normally closed) will depend on your system and the detector's internal relay configuration. Consult your control system's manual for proper integration.
- Сигурна монтажа: Secure the detector firmly in place using appropriate fasteners (not included).
- Повер Ресторатион: Once all connections are secure and verified, restore power to the circuit.
4. Операција
The DiversiTech WS-1 Wet Switch operates automatically once installed and powered.
4.1 Индикатори
- ПОВЕР ОН: A green indicator light illuminates when the device is receiving 24 VAC power.
- ВЛАГА: An orange or red indicator light illuminates when moisture is detected by the sensor pads. This also triggers the internal relay, sending a signal to the connected control system.
4.2 Testing the Device
To ensure proper functionality, periodically test the detector:
- Притисните и држите зелену "PUSH TO TEST" дугме.
- The "MOISTURE" indicator light should illuminate, and the connected alarm or control system should activate, simulating a flood detection event.
- Release the button. The "MOISTURE" light should turn off, and the alarm should deactivate.
4.3 Ресетовање уређаја
After a moisture detection event or a test, the device may need to be reset:
- Ensure the area around the sensor pads is completely dry.
- Притисните и држите црвену "PUSH TO RESET" button until the "MOISTURE" indicator light turns off.
- Release the button. The device is now reset and ready for further detection.
5. Одржавање
The DiversiTech WS-1 Wet Switch requires minimal maintenance to ensure reliable operation.
- Редовно чишћење: Periodically inspect the sensor pads for dust, debris, or corrosion. Gently clean with a soft, dry cloth if necessary. Do not use abrasive cleaners or solvents.
- Периодично тестирање: Test the device monthly using the "PUSH TO TEST" button to confirm it is functioning correctly.
- Енвиронментал Цхецк: Ensure the installation area remains free from obstructions that could prevent water from reaching the sensor pads.
КСНУМКС. Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Индикатор напајања | No 24 VAC power | Check power supply and wiring connections. Ensure circuit breaker is on. |
| Moisture Indicator On, No Water | Sensor pads are wet or dirty; device needs reset | Dry sensor pads thoroughly. Press "PUSH TO RESET" button. Clean sensor pads if dirty. |
| Device Not Triggering with Water | Sensor pads not making contact; faulty wiring; device malfunction | Ensure water reaches sensor pads. Check wiring connections. Test device with "PUSH TO TEST" button. If issue persists, contact support. |
| Test Button Not Working | No power; faulty button | Check power indicator. If power is on and test fails, contact support. |
7. Спецификације производа
- Број модела: ВС-1
- Произвођач: Diversitech
- Повер Инпут: 24 ВАЦ
- Тежина артикла: 1.32 фунти
- Димензије пакета: 9.65 к 7.99 к 3.07 инча
- ASIN: B07TZCQNDL
- Први доступан датум: 7. јул 2019
- Батерије су потребне: Не
- Батерије укључене: Не
8. Гаранција и подршка
For warranty information or technical support, please contact Diversitech Corporation directly. Refer to the product packaging or the official Diversitech webсајт за актуелне контакт податке.
Произвођач: Diversitech Corporation, Duluth, GA.