Упутство за употребу Digitus USB-серијског адаптера

Увод

This manual provides instructions for the Digitus USB to Serial Adapter (Model DA-70167). This device enables data exchange between a personal computer with a USB port and various serial peripherals, such as machine controls, modems, and sensors. It is compliant with the USB 2.0 standard and features a PL2303GT chipset, offering customizable data transfer rates.

The adapter includes one USB 2.0 Male A connector and one D-SUB 9-Pin Male (RS232) connector, with gold-plated contacts for reliable connection. An 80 cm USB extension cable is also included for convenience.

Садржај пакета

• 1 x Digitus USB to Serial Adapter (DA-70167)
• 1 x 80 cm USB Extension Cable

Производ је завршенview

Слика 1: Digitus USB to Serial Adapter. This image shows the main view of the adapter, highlighting its compact design and the D-SUB 9-pin connector.

Слика 2: Connection points of the adapter. This diagram illustrates the RS232 (D-SUB 9-pin) and USB A 2.0 connectors on the adapter.

Слика 3: Цлосе-уп view of the D-SUB 9-pin (RS232) male connector, showing the pin configuration.

Слика 4: View of the USB-A male connector, which plugs into the computer's USB port.

Сетуп

Пратите ове кораке да бисте подесили свој Digitus USB на серијски адаптер:

1. Инсталација драјвера: Before connecting the adapter, it is recommended to install the necessary drivers for the PL2303GT chipset. Drivers are typically available on the Digitus support website or can be automatically installed by your operating system upon first connection.
2. Повежите се са рачунаром: Plug the USB-A male connector of the adapter into an available USB 2.0 port on your computer. You may use the included 80 cm USB extension cable if needed.
3. Connect to Serial Device: Connect the D-SUB 9-pin male (RS232) connector of the adapter to the serial port of your peripheral device (e.g., modem, machine control, label printer, barcode scanner, POS system, cash register, network switch). Ensure the screws on the D-SUB connector are tightened to secure the connection.

Слика 5: Diagram showing a one-to-one connection setup, illustrating the adapter connecting a label printer or other RS-232 device to a laptop/PC.

Слика 6: The USB to Serial Adapter connected to a network switch and a laptop, demonstrating a typical application.

Упутство за употребу

Once the adapter is physically connected and drivers are installed, your computer should recognize the new serial port. You can then use software applications that require serial communication to interact with your connected peripheral device.

• Identifying the COM Port: After installation, check your computer's Device Manager (Windows) or System Information (macOS/Linux) to identify the assigned COM port number for the USB to Serial Adapter. This port number will be used by your serial communication software.
• Configuring Software: Open your serial communication software (e.g., PuTTY, Tera Term, HyperTerminal) and configure it to use the identified COM port. Set the appropriate communication parameters such as baud rate (data transfer rate), data bits, parity, stop bits, and flow control, matching the requirements of your serial peripheral device. The adapter supports customizable data transfer rates between 75 bit and 128,000 bit per second.
• Размена података: Initiate data exchange through your software. The adapter will facilitate the communication between your computer's USB port and the serial device.

Слика 7: Diagram illustrating the wide range of devices compatible with the USB to Serial Adapter, including switches, laptops/PCs, label writers, barcode scanners, POS systems, printers, modems, and cash registers.

Одржавање

The Digitus USB to Serial Adapter requires minimal maintenance. Follow these guidelines to ensure its longevity:

• Чишћење: Use a soft, dry cloth to clean the exterior of the adapter. Do not use liquid cleaners or solvents.
• Складиштење: Чувајте адаптер на хладном и сувом месту, даље од директне сунчеве светлости и екстремних температура када се не користи.
• Руковање: Avoid dropping the adapter or subjecting it to strong impacts. Do not bend or twist the cable excessively.
• Одржавање конектора: Keep the connectors free from dust and debris. If necessary, use compressed air to clean the ports.

Решавање проблема

Спецификације

Гаранција и подршка

За информације о гаранцији и техничку подршку, обратите се званичном Дигитус сервису. webсајт или контактирајте њихову корисничку службу. Сачувајте рачун као доказ о куповини за потребе гаранције.

Digitus Official Webсајт: ввв.дигитус.инфо