Приручници+

мооас МТ-Ц1

mooas Cube Timer (Violet) Instruction Manual

Модел: MT-C1

Увод

The mooas Cube Timer is a simple and intuitive gravity-sensor timer designed for various time management needs. Its cube design allows for quick and easy activation of pre-set timers by simply flipping the cube to the desired time face. This manual provides essential information for setting up, operating, and maintaining your mooas Cube Timer.

Violet mooas Cube Timer on a white surface

Image: The violet mooas Cube Timer, showing its compact design.

Сетуп

1. Инсталација батерије

The mooas Cube Timer requires 2 AAA batteries (not included). To install:

  1. Locate the battery compartment on the bottom of the timer.
  2. Отворите поклопац одељка за батерије.
  3. Уметните 2 ААА батерије, водећи рачуна о исправном поларитету (+/-).
  4. Добро затворите поклопац одељка за батерије.
Close-up of the yellow mooas Cube Timer showing the battery compartment and control switches

Image: Underside of the cube timer showing the battery compartment and alarm volume switch.

2. Подешавање јачине звука аларма

The alarm volume can be adjusted using the switch located on the bottom of the timer. You can select between:

Упутство за употребу

1. Starting a Timer

The mooas Cube Timer is designed for ease of use. To start a timer:

  1. Ensure the timer is powered on (HI or LO volume selected).
  2. Simply turn the cube so that the side with your desired pre-set time (e.g., 5 min, 10 min, 20 min, 30 min) faces upwards.
  3. The timer will immediately begin counting down. A red light will blink to indicate the timer is active.
Illustration showing how to use the cube timer by flipping it to the desired time

Image: Visual guide on how to activate the timer by placing the desired time face up.

2. Pre-set Times (Violet Model)

The Violet mooas Cube Timer features the following pre-set time options:

Other color variants of the mooas Cube Timer may offer different time sets.

Multiple mooas Cube Timers in different colors, each showing different time settings

Image: Various cube timers demonstrating different time configurations available across models.

3. Дигитални дисплеј

A small digital display on the side of the timer shows the remaining time. This display is always oriented correctly for viewing, regardless of which side is facing up.

4. Stopping the Timer

When the timer reaches zero, the alarm will sound (if not set to OFF). To stop the alarm and reset the timer, simply turn the cube so that the side with the LCD screen or the side without any numbers faces upwards.

Карактеристике

Одржавање

Решавање проблема

ПроблемМогући узрокРешење
Timer makes a rattling sound.Internal weight for gravity sensing.This is normal and not a defect. The internal weight is necessary for proper functioning.
Timer does not start or functions inconsistently.Low batteries, incorrect orientation, or internal mechanism issue.
  • Замените батерије свежим ААА батеријама.
  • Ensure the desired time face is placed firmly and correctly upwards.
  • To "reboot" the timer, turn it so the blank side (or LCD side) is up, wait for a beep, then turn it to the desired time.
Red light is distracting.Personal preference.The red light indicates the timer is active. If distracting, consider placing the timer in a position where the light is not directly visible, or covering the light with a small piece of opaque tape.

Спецификације

Dimensions of the mooas Cube Timer, showing 2.6 inches on each side

Image: Diagram illustrating the dimensions of the mooas Cube Timer.

Гаранција и подршка

For warranty information or product support, please refer to the packaging or contact mooas customer service directly. Keep your purchase receipt for warranty claims.