TecTake 403238 / 800747 Swivel Office Chair Instruction Manual

Увод

This manual provides detailed instructions for the assembly, operation, and maintenance of your TecTake 403238 / 800747 Swivel Office Chair. Please read these instructions carefully before assembly and use to ensure proper function and longevity of your product. This ergonomic office chair is designed for comfort and support during extended periods of sitting, featuring a padded seat, backrest, and headrest, along with adjustable height and tilt functions.

Image: The TecTake 403238 / 800747 Swivel Office Chair, showcasing its black faux leather upholstery, padded armrests, and five-star base with casters.

Безбедносна упутства

To prevent injury or damage to the chair, please observe the following safety guidelines:

• Ensure all components are securely fastened before use. Regularly check and tighten screws.
• Do not exceed the maximum weight capacity of the chair (refer to specifications).
• Избегавајте стајање на столици или њено коришћење као степенице.
• Keep hands and fingers clear of moving parts, especially during height and tilt adjustments.
• Користите столицу на равној површини да бисте спречили превртање.
• Држите материјал за паковање ван домашаја деце како бисте спречили опасност од гушења.
• Do not expose the chair to direct sunlight or extreme temperatures, as this may damage the material.

Листа компоненти

Пре почетка монтаже, проверите да ли су сви делови присутни и да ли су неоштећени. Ако неки делови недостају или су оштећени, немојте настављати са монтажом и контактирајте корисничку подршку.

• Наслон за леђа
• Сеат Цусхион
• Наслони за руке (леви и десни)
• Механизам плоча (испод седишта)
• Цилиндар за гас лифт
• Поклопац за гас лифт
• База са пет звездица
• Точкови (5 комада)
• Hardware (screws, washers, Allen key)

Упутство за монтажу

Follow these steps to assemble your office chair. It is recommended to assemble the chair on a soft, clean surface to prevent scratches.

Step 1: Attach Casters to the Base

Уметните сваки од пет точкова у рупе на крају сваке ноге постоља са пет звезда. Чврсто притисните док не кликну на своје место.

Step 2: Insert Gas Lift

Place the gas lift cylinder into the central hole of the five-star base. Then, slide the gas lift cover over the gas lift cylinder.

Step 3: Attach Mechanism Plate to Seat

Align the mechanism plate with the pre-drilled holes on the underside of the seat cushion. Ensure the adjustment lever faces the front of the seat. Secure it with the provided screws and tighten them using the Allen key.

Image: Close-up of the chair's adjustment lever, indicating its function for height and tilt control. This lever is part of the mechanism plate that attaches to the seat.

Step 4: Attach Armrests to Seat and Backrest

Attach the armrests to the sides of the seat cushion using the designated screws. Do not fully tighten yet. Then, align the backrest with the armrests and secure it with screws. Once all screws are in place, tighten them evenly and securely.

Корак 5: Повежите склоп седишта са гасом за подизање

Carefully place the assembled seat and backrest onto the gas lift cylinder. The tapered end of the gas lift will fit into the central hole of the mechanism plate. Press down firmly on the seat to ensure a secure connection.

Слика: Фронт view of the fully assembled TecTake office chair, highlighting the padded seat, backrest, and armrests.

Your TecTake office chair is now assembled. Before use, ensure all connections are tight and the chair is stable.

Упутство за употребу

Your TecTake office chair offers several adjustments to customize your seating experience:

Подешавање висине

To adjust the seat height, locate the lever on the right side, beneath the seat.

• Да подигнете седиште: Lift the lever while taking your weight off the seat. The seat will rise automatically. Release the lever at the desired height.
• Да спустите седиште: Lift the lever while remaining seated. The seat will lower. Release the lever at the desired height.

Tilt Function and Lock

The chair features a tilt mechanism allowing the backrest and seat to recline together.

• To enable tilt: Pull the same lever (used for height adjustment) outwards from the chair. The chair will now allow you to recline.
• To lock tilt: Push the lever inwards towards the chair. The chair will lock in its upright position.

Image: An illustration demonstrating the range of height adjustment and the reclining tilt function of the office chair.

Подешавање напетости нагиба

Beneath the seat, at the front, there is a round knob. This knob controls the tension of the tilt mechanism.

• To increase tension (harder to recline): Окрените дугме у смеру казаљке на сату.
• To decrease tension (easier to recline): Окрените дугме у смеру супротном од казаљке на сату.

Одржавање

Regular maintenance will help prolong the life and appearance of your office chair.

• Чишћење: For the faux leather upholstery, wipe with a soft, damp cloth. For stubborn stains, use a mild soap solution and wipe dry immediately. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the material.
• Оквир и основа: Wipe metal and plastic parts with a damp тканина.
• Котачићи: Periodically clean casters to remove hair, dust, and debris that may hinder smooth movement.
• хардвер: Every 3-6 months, check all screws and bolts to ensure they are tight. Retighten as necessary to maintain stability and safety.
• Избегавајте преоптерећење: Do not exceed the chair's stated weight capacity.

Решавање проблема

Ако наиђете на било какве проблеме са столицом, погледајте следеће уобичајене проблеме и решења:

• Шкрипање столице:

  Check all screws and bolts and tighten them. A small amount of silicone lubricant can be applied to moving metal parts, avoiding contact with plastic or upholstery.
• Столица се не подешава по висини:

  Ensure the gas lift lever is fully engaged. If the issue persists, the gas lift cylinder may be faulty and require replacement. Contact customer support.

• Chair Feels Unstable/Wobbly:

  Verify that all screws, especially those connecting the armrests to the seat and backrest, are securely tightened. Ensure the gas lift is properly seated in the base and mechanism plate.

• Casters Do Not Roll Smoothly:

  Remove any hair, dust, or debris that may be caught in the caster wheels. Clean the wheels and axles. Ensure the casters are fully inserted into the base.

Спецификације

Димензије (приближне)

Image: Technical drawing illustrating the approximate dimensions of the TecTake office chair in centimeters. Key measurements include seat width (55 cm), seat depth (52 cm), backrest width (48 cm), adjustable seat height (47-55 cm), and overall height (115-123 cm).

• Overall Height: 115-123 cm
• Seat Height (adjustable): 47-55 cm
• Ширина седишта: 55 цм
• Дубина седишта: 52 цм
• Backrest Width: 48 cm
• Armrest Height (from seat): 68.5-76.5 cm
• Base Diameter: 67 cm

Гаранција и подршка

Specific warranty information for the TecTake 403238 / 800747 Swivel Office Chair is not provided in this document. For details regarding warranty coverage, spare parts availability, or technical support, please refer to the official TecTake website or contact their customer service directly. Information regarding spare parts availability was not provided in the product data.

Можете посетити TecTake Brand Store on Amazon за више информација.