Intelbras IVP 2000 SF Wireless Passive Infrared Sensor Instruction Manual

1. Увод

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Intelbras IVP 2000 SF Wireless Passive Infrared Sensor. This device is designed to detect motion by sensing infrared radiation emitted by moving objects, providing an essential component for security systems.

2. Безбедносне информације

• Пажљиво прочитајте сва упутства пре инсталације и рада.
• Do not expose the sensor to direct sunlight, extreme temperatures, or high humidity.
• Ensure the device is installed in a stable location to prevent accidental falls.
• Only use the specified battery type. Incorrect battery usage may cause damage or malfunction.
• Држите уређај ван домашаја деце.

3. Садржај пакета

Проверите да ли су све ставке присутне у пакету:

• 1x Intelbras IVP 2000 SF Wireless Passive Infrared Sensor
• 1к носач за монтирање
• 1x Set of Screws and Wall Plugs
• 1x Battery (Alkaline)
• 1x Quick Start Guide (this manual)

4. Производ је готовview

The Intelbras IVP 2000 SF is a wireless passive infrared sensor designed for indoor use. It features advanced detection technology to minimize false alarms and ensure reliable security monitoring.

Слика 1: Фронт view of the Intelbras IVP 2000 SF sensor. This image displays the white casing of the sensor with the Intelbras logo and "IVP 2000 SF" model designation clearly visible on the top front. The translucent detection lens is prominent on the lower front section.

Кључне компоненте:

• PIR Lens: Detects infrared radiation from moving bodies.
• ЛЕД индикатор: Provides status feedback (e.g., detection, low battery).
• Одељак за батерије: Houses the power source.
• Тачке монтаже: For secure installation on a wall.
• Tampер Свитцх: Triggers an alarm if the sensor cover is opened.

5. Подешавање

5.1. Инсталација батерије

1. Open the sensor's front cover by gently prying it open from the bottom notch.
2. Insert the provided alkaline battery into the battery compartment, observing the correct polarity (+/-).
3. Close the front cover, ensuring it clicks securely into place.

5.2. Монтажа сензора

The sensor is designed for wall mounting. Choose a location that provides optimal coverage of the area to be protected, avoiding direct heat sources or air conditioning vents.

1. Select a mounting height between 2.0 to 2.2 meters (6.5 to 7.2 feet) from the floor.
2. Користите монтажни држач као шаблон за означавање положаја завртња на зиду.
3. Drill holes at the marked positions and insert the wall plugs.
4. Причврстите носач за монтажу на зид помоћу приложених вијака.
5. Attach the sensor unit to the mounting bracket, ensuring it is firmly seated.

5.3. Pairing with a Security System

Refer to your Intelbras security system or smart hub manual for specific instructions on how to add a new wireless sensor. Generally, the process involves:

1. Putting your security system into "pairing" or "enrollment" mode.
2. Activating the sensor (e.g., by triggering it or pressing a specific button, if available, or by installing the battery for the first time).
3. Confirming successful pairing through the system's interface or LED indicators.

6. Руковање сензором

6.1. Detection Principle

The IVP 2000 SF sensor operates on the principle of passive infrared (PIR) detection. It detects changes in infrared energy within its field of view, which are typically caused by the movement of a warm body. When a significant change is detected, the sensor transmits a signal to the connected security system.

6.2. Статус ЛЕД индикатора

• Brief Flash: Indicates motion detection.
• Continuous Flash: May indicate low battery or a fault. Refer to the troubleshooting section.
• Без светла: Normal standby mode, or battery is completely depleted.

6.3. Detection Range and Coverage

The sensor typically offers a detection range of up to 12 meters (39 feet) with a coverage angle of approximately 90 degrees. Optimal performance is achieved when movement occurs across the sensor's field of view rather than directly towards it.

7. Одржавање

7.1. Чишћење

Periodically clean the sensor's lens and casing with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device.

7.2. Замена батерије

When the LED indicator signals a low battery (e.g., continuous flashing or specific system notification), replace the battery promptly. Follow the battery installation steps outlined in section 5.1. Dispose of old batteries according to local regulations.

7.3. Редовне провере

Test the sensor's functionality regularly (e.g., monthly) by walking through its detection zone to ensure it triggers an alarm or notification on your security system.

КСНУМКС. Решавање проблема

9. Спецификације

• Бренд: Интелбрас
• Модел: IVP2000SF
• Извор напајања: Напаја се батеријама
• Тип батерије: Алкална
• Тип монтаже: Зидни носач
• Компатибилни уређаји: Intelbras security systems and smart home hubs
• Димензије производа: Приближно 17 к 10 к 9 цм (6.7 к 3.9 к 3.5 инча)
• Метод детекције: Пасивни инфрацрвени (ПИР)
• Опсег детекције: До 12 метара (39 стопе)
• Угао детекције: Отприлике 90 степени
• Радно окружење: Само за унутрашњу употребу

10. Информације о гаранцији

Intelbras products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the official Intelbras webсајт или контактирајте њихову корисничку подршку. Сачувајте доказ о куповини за потребе гаранције.

11. Подршка

If you encounter any issues or have questions regarding your Intelbras IVP 2000 SF sensor that are not covered in this manual, please contact Intelbras customer support through their official channels:

• Webсајт: Visit the official Intelbras webсајт за ресурсе подршке, честа питања и контакт информације.
• Телефон: Refer to the contact section on the Intelbras webсајт за локалне бројеве подршке.