YISSVIC B07WHP96G2

YISSVIC Упутство за употребу дигиталног будилника

Model: B07WHP96G2

Увод

Хвала вам на куповиниasing the YISSVIC Digital Alarm Clock. This manual provides detailed instructions for setting up, operating, and maintaining your new alarm clock. Please read it carefully to ensure optimal performance and longevity of the product.

Карактеристике производа

  • Large 6.3-inch LED display for clear visibility.
  • Dual alarm settings for different wake-up times.
  • Six adjustable brightness levels to suit various environments.
  • Two distinct alarm sounds.
  • 9-minute snooze function.
  • 12/24 hour time format options.
  • Елегантан и модеран дизајн.
YISSVIC Digital Alarm Clock with dimensions and key features

Image: YISSVIC Digital Alarm Clock showing its dimensions (6.3 inches wide, 1.9 inches deep, 2.2 inches high) and key features including 2 alarms, 9-minute snooze, digital full screen, 2 alarm sounds, adjustable brightness, and 12/24 time format.

Сетуп

  1. Распакивање: Carefully remove the alarm clock from its packaging. Ensure all components are present: the alarm clock unit and the power adapter.
  2. Прикључак за напајање: Connect the power adapter to the DC input port on the back of the alarm clock. Plug the adapter into a standard electrical outlet. The display will light up.
  3. Почетно подешавање времена: Upon first power-up, the clock display may show a default time or flash. Refer to the "Setting Time" section under "Operating Instructions" to set the correct time.

Упутство за употребу

Подешавање времена

  1. Притисните и држите ВРЕМЕНСКИ СКЛОП button (usually located on the top or back) until the hour digits begin to flash.
  2. Користите ХОУР и МИНУТЕ buttons to adjust the time. Pressing and holding these buttons will allow for faster adjustment.
  3. Притисните ВРЕМЕНСКИ СКЛОП again to confirm the time and move to the 12/24 hour format setting.
  4. Користите 12/24Х button to select your preferred time format.
  5. Притисните ВРЕМЕНСКИ СКЛОП one last time to exit time setting mode.

Setting Alarms (Alarm 1 and Alarm 2)

  1. Притисните и држите АЛАРМ 1 СЕТ дугме док цифре сата аларма не затрепере.
  2. Користите ХОУР и МИНУТЕ buttons to set the desired alarm time for Alarm 1.
  3. Притисните АЛАРМ 1 СЕТ again to confirm the time and move to alarm sound selection.
  4. Користите ЗВУК АЛАРМА button to cycle through the available alarm sounds.
  5. Притисните АЛАРМ 1 СЕТ to exit Alarm 1 setting mode.
  6. Repeat the process for АЛАРМ 2 СЕТ if a second alarm is desired.
YISSVIC Digital Alarm Clock showing alarm sound and volume settings

Image: YISSVIC Digital Alarm Clock illustrating the two alarm sounds (original beep and chords) and two adjustable volume levels (65db and 75db).

Activating/Deactivating Alarms

  • Притисните тастер АЛАРМ 1 УКЉУЧЕН/ИСКЉУЧЕН button to toggle Alarm 1 on or off. An alarm icon will appear/disappear on the display.
  • Притисните тастер АЛАРМ 2 УКЉУЧЕН/ИСКЉУЧЕН button to toggle Alarm 2 on or off.

Функција одлагања

  • Када се огласи аларм, притисните велико СНООЗЕ button (usually on top) to temporarily silence the alarm for 9 minutes. The alarm will sound again after 9 minutes.
  • To cancel the snooze and turn off the alarm completely until the next set time, press any other button on the clock.
YISSVIC Digital Alarm Clock showing snooze function

Image: YISSVIC Digital Alarm Clock with a hand pressing the large snooze button, indicating a 9-minute snooze function.

Подешавање осветљености екрана

  • Притисните тастер ДИММЕР or БРИГХТНЕСС button (refer to button labels on your device) to cycle through the 6 available brightness levels.
  • Select the brightness level that is most comfortable for your environment.
YISSVIC Digital Alarm Clock with 6 brightness levels

Image: YISSVIC Digital Alarm Clock demonstrating 6 levels of brightness, from Level 1 (darkest) to Level 5 (brightest), and an off state, ensuring visual comfort.

Одржавање

  • Чишћење: Use a soft, dry cloth to wipe the surface of the alarm clock. Avoid using abrasive cleaners or solvents, as they may damage the finish.
  • Снага: Ensure the clock is always connected to a stable power source. In case of power outage, the clock may lose time settings if not equipped with a backup battery (check specifications).
  • Пласман: Place the alarm clock on a stable, flat surface away from direct sunlight, excessive heat, or moisture.

Решавање проблема

ПроблемМогући узрокРешење
Приказ сата је празан.No power or power adapter is loose.Check power connection. Ensure the adapter is securely plugged into the clock and the wall outlet.
Аларм се не оглашава.Аларм није активиран или је јачина звука прениска.Ensure the alarm icon is displayed. Adjust alarm volume if applicable.
Време је погрешно.Time was not set correctly or power interruption occurred.Поново подесите време пратећи упутства у одељку „Подешавање времена“.
Екран је превише светао/таман.Потребно је подесити ниво осветљености.Press the DIMMER/BRIGHTNESS button to cycle through levels.

Спецификације

  • Бренд: ИИССВИЦ
  • Модел: B07WHP96G2
  • Тип приказа: Дигитал ЛЕД
  • Величина екрана: Приближно 6.3 инча
  • Извор напајања: Цордед Елецтриц
  • Материјал оквира: Акрилонитрил бутадиен стирен
  • Функција аларма: Dual alarms, 2 sounds, 9-minute snooze
  • Осветљеност: 6 подесива нивоа
  • Формат времена: Могућност избора 12/24 сата

Гаранција и подршка

YISSVIC products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official YISSVIC webсајт. Сачувајте рачун као доказ о куповини за потребе гаранције.

For further assistance, please contact YISSVIC customer service via their official webсајт: www.yissvic.com

© 2023 YISSVIC. All rights reserved.