НИЦРЕВ једноканални ЛЕД Лигхт Тимер Про Упутство за употребу

1. Производ је готовview

The NICREW Single Channel LED Light Timer Pro is a digital dimmer designed to control 16-30VDC LED lights. It offers three operating modes, including ramp-up/dim-down functions, and supports up to six programmable time points for creating custom lighting cycles. The device features an internal memory to retain settings during power outagес.

Image 1: The NICREW Single Channel LED Light Timer Pro, showing the main unit with its input and output cables.

Image 2: A hand holding the compact NICREW Single Channel LED Light Timer Pro, illustrating its size and button layout.

Image 3: The product packaging for the NICREW Single Channel LED Light Timer Pro, displaying the timer unit and included DC plug adapters.

2. Подешавање и инсталација

2.1 Компатибилност

This timer is compatible with 16-30VDC LED lights only. It supports up to 4A (maximum 96 watts at 24VDC) and uses standard 2.5mm x 5.5mm or 2.1mm x 5.5mm barrel connectors. Please verify your LED lighting manufacturer's specifications for compatibility.

Image 4: DC Plug Adapters (A: 2.5mm female to 2.1mm male, B: 2.1mm female to 2.5mm male) for ensuring compatibility with various barrel plug sizes.

2.2 Повезивање

1. Connect your LED light to the male DC jack on the timer.
2. Connect your power transformer to the female DC plug on the timer.

Image 5: Diagram illustrating the connection process for 2.1mm x 5.5mm and 2.5mm x 5.5mm barrel plugs, including the use of DC plug adapters.

2.3 First Time Setup / Reset

To reset the timer for the first time or after a power cycle, press the СЕТ button (gear icon) and the ПОВЕР button (power icon) simultaneously. Hold them down for 3 seconds until the display resets.

3. Упутство за употребу

3.1 Подешавање тренутног времена

1. Притисните и држите СЕТ button (gear icon) for 3 seconds. The hour digits will begin to flash.
2. Притисните тастер САТ + dugme za podešavanje sata.
3. Притисните тастер MINUTE - dugme za podešavanje minuta.
4. Притисните СЕТ поново да потврдите време.

3.2 Choosing an Operating Mode (F1-F3)

The timer offers three modes:

• F1: Straight ON/OFF Mode - Simple on/off functionality without dimming.
• F2: Ramp Mode (15 minutes ramp/замутити) - Gradual increase or decrease in light intensity over 15 minutes.
• F3: Ramp Mode (30 minutes ramp/замутити) - Gradual increase or decrease in light intensity over 30 minutes.

Да бисте изабрали режим:

1. After setting the current time, press the СЕТ button (gear icon) again. The display will show 'F1', 'F2', or 'F3'.
2. Користите САТ + or MINUTE - buttons to cycle through the modes.
3. Притисните СЕТ да потврдите свој избор.

3.3 Programming Time Points (L-01 to L-06)

The timer supports up to 6 separate programming time points (L-01 to L-06) to create custom dawn and dusk effects.

1. After selecting the operating mode, press СЕТ. The display will briefly show 'L-01' and then flash '--:--'.
2. Притисните тастер ПОВЕР button (power icon) to activate the L-01 time point.
3. Користите САТ + и MINUTE - buttons to set your desired time for L-01.
4. Притисните СЕТ again to set the light intensity for L-01. The display will show 'L.000' (or similar, indicating intensity).
5. Користите САТ + or MINUTE - buttons to set the desired light intensity (from 1% to 100%).
6. Притисните СЕТ to move to the next time point (L-02). Repeat steps 2-5 for L-02, L-03, and L-04.
7. To skip L-05 and L-06, simply press СЕТ repeatedly until the display returns to the current time.

Image 6: A graph illustrating a programming example for the F2 Ramp Mode, showing light intensity changes over six time points throughout the day.

3.4 Manual On/Off

To manually turn the light on or off, press the ПОВЕР button (power icon). When the light is manually turned off, the display will show 'OFF'.

3.5 Adjusting Light Intensity (Manual Mode Only)

When the light is manually turned on (display shows 'ON'), you can adjust its intensity:

1. Притисните тастер САТ + or MINUTE - buttons to directly set the brightness level.
2. Притисните тастер СЕТ button (gear icon) to exit the intensity setting and resume the normal lighting cycle.

4. Одржавање

To ensure optimal performance and longevity of your NICREW Single Channel LED Light Timer Pro, keep the device clean and dry. Avoid exposing it to excessive moisture or extreme temperatures. Regularly check connections to ensure they are secure.

5. Спецификације

КСНУМКС. Решавање проблема

• Display shows '8.8:8.8' or is unresponsive: This may indicate a need for a reset. Perform the First Time Setup / Reset procedure by pressing СЕТ и ПОВЕР истовремено 3 секунде.
• Light not turning on/off or dimming as programmed: Verify that the correct operating mode (F1, F2, or F3) is selected and that all time points (L-01 to L-06) are programmed correctly. Ensure the timer is not in manual ON/OFF mode.
• Incompatibility with LED light: Confirm that your LED light operates within the 16-30VDC range and uses a standard 2.5mm or 2.1mm barrel connector. Use the provided DC plug adapters if necessary.
• Подешавања су изгубљена након нестанка струјеtage: The timer features internal memory to store pre-programmed settings. If settings are lost, ensure the device is properly connected and re-program if needed.

7. Гаранција и подршка

The NICREW Single Channel LED Light Timer Pro comes with a hassle-free 12-month warranty. For any product inquiries, technical assistance, or warranty claims, please contact NICREW customer service. We are committed to providing 24-hour friendly customer service to ensure your satisfaction.