TC Electronic Flashback 2 X4 DELAY педала - упутство за употребу

Увод

This manual provides comprehensive instructions for the TC Electronic Flashback 2 X4 DELAY pedal. It covers essential information regarding setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device. The Flashback 2 X4 DELAY is a versatile delay pedal featuring multiple delay types, MASH footswitches, and looper functionality.

Кључне карактеристике укључују:

• Legendary delay pedal with 3 pressure-sensitive footswitches.
• New algorithms including Crystal, Analog, and Tape.
• Access up to 6 stored delay presets.
• 10 quality delay types plus 6 TonePrint slots.

Производ је завршенview

The TC Electronic Flashback 2 X4 DELAY pedal offers a wide range of delay effects and looping capabilities. Familiarize yourself with the pedal's layout and connections before use.

Слика 1: Врх view of the TC Electronic Flashback 2 X4 DELAY pedal, showing all knobs, footswitches, and indicators.

Слика 2: Rear panel of the Flashback 2 X4 DELAY, displaying input/output jacks, expression pedal input, power input, MIDI connections, and bypass switches.

Сетуп

1. Прикључак за напајање

• Connect a 9V DC power supply (minimum 300mA, center negative) to the 9VDC input jack on the rear panel.
• Уверите се да напајање задовољава наведену запреминуtagи тренутне захтеве за спречавање оштећења.

2. Аудио везе

• Моно подешавање: Connect your instrument to the MONO INPUT jack. Connect the MONO OUTPUT jack to your ampспасилац или следећа педала у сигналном ланцу.
• Стерео подешавање: Connect your instrument (or preceding stereo pedal) to both MONO and STEREO INPUT jacks. Connect the MONO and STEREO OUTPUT jacks to your stereo amplifier setup or other stereo effects.

3. Expression Pedal (Optional)

• Connect an expression pedal to the EXP PEDAL input for real-time control over various delay parameters.

4. MIDI Connections (Optional)

• Use the MIDI IN and THRU ports to integrate the Flashback 2 X4 into a MIDI-controlled setup for preset changes and parameter control.

5. Bypass Mode Selection

• On the rear panel, locate the BYPASS switch.
• Прави обилазница: Provides a completely unaltered signal when the pedal is disengaged.
• Баферовани бајпас: Maintains signal integrity over long cable runs and provides spillover for delay trails when disengaged.

6. Функција сушења

• The KILL DRY switch on the rear panel removes the dry signal from the output. This is useful when using the pedal in a parallel effects loop or with a mixer that provides its own dry signal.

Упутство за употребу

1. Контроле прекоview

• TYPE Selector: Rotary switch to select delay algorithms (Loop, Reverse, LoFi, Ping Pong, Tape, Crystal, Dynamic, 2290, 2290 Mod, Analog).
• SUBDIV Knob: Controls the rhythmic subdivision of the delay repeats.
• DELAY Knob: Подешава време кашњења.
• Дугме за повратне информације: Controls the number of delay repeats.
• Дугме ЛЕВЕЛ: Adjusts the overall output level of the delayed signal.
• BANK 1/2 / STORE Switch: Toggles between two banks of presets (Bank 1 and Bank 2). Press and hold to store a preset.

2. Функције ножног прекидача

• Footswitches A, B, C: Engage/disengage individual delay presets. These are also MASH footswitches.
• MASH Functionality: Pressing and holding footswitches A, B, or C with varying pressure allows for expressive real-time control over specific delay parameters, depending on the selected TonePrint.
• ТАП ножни прекидач: Tap this footswitch two or more times to set the delay tempo.

3. Looper Operation

When the TYPE selector is set to "Loop":

• REC (Footswitch A): Press to start recording a loop. The REC LED will illuminate. Press again to stop recording and start playback.
• PLAY/PAUSE (Footswitch B): Press to play or pause the current loop.
• ONCE (Footswitch C): Plays the loop once and then stops.
• UNDO/REDDO (TAP Footswitch): Press to undo the last overdub. Press and hold to redo.

4. TonePrint Integration

The Flashback 2 X4 supports TC Electronic's TonePrint technology. This allows you to upload custom-tuned effects from your smartphone or computer.

• Download the free TonePrint App for iOS/Android or the TonePrint Editor for Mac/PC.
• Connect your pedal via USB to your computer or use the "Beam" function with your smartphone.
• Load artist TonePrints or create your own custom delay sounds.
• The pedal has 6 dedicated TonePrint slots for storing your favorite custom effects.

Одржавање

• Чишћење: Користите меку, суву крпу за чишћење спољашњости педале. Избегавајте абразивна средства за чишћење или раствараче.
• Складиштење: Store the pedal in a dry environment, away from extreme temperatures and humidity. Disconnect power when not in use for extended periods.
• Управљање кабловима: Ensure all cables are in good condition and properly connected to prevent signal loss or damage.

Решавање проблема

• Нема напајања:
  • Verify the power supply is correctly connected and meets the 9V DC, 300mA (center negative) specification.
  • Проверите утичницу.
• Нема звука:
  • Ensure all audio cables are securely connected to the correct input/output jacks.
  • Check the volume/level settings on your instrument, amplifier, and the pedal itself.
  • Тестирајте са различитим кабловима да бисте искључили неисправне везе.
• Unexpected Delay Behavior:
  • Check the selected delay TYPE and knob settings (SUBDIV, DELAY, FEEDBACK, LEVEL).
  • If using TonePrint, ensure the correct TonePrint is loaded and configured as desired.
  • For MASH functionality, ensure you are applying appropriate pressure and that the TonePrint supports the desired parameter control.
• Looper Issues:
  • Ensure the TYPE selector is set to "Loop".
  • Follow the recording and playback steps carefully.

Спецификације

Гаранција и подршка

For warranty information, technical support, and additional resources, please visit the official TC Electronic webсајт или контактирајте њихову службу за кориснике. Сачувајте рачун као доказ о куповини за потребе гаранције.

Више информација и подршке можете пронаћи на TC Electronic Store на Амазону.