ThreeH AC10 дигитални дрвени коцкасти будилник - упутство за употребу

1. Увод

This manual provides comprehensive instructions for the ThreeH AC10 Digital Wood Cube Alarm Clock. This device features a clear LED display, sound control, and multiple functions including time, date, temperature, and alarm settings. Please read this manual carefully to ensure proper operation and to fully utilize all features.

Image 1.1: The ThreeH AC10 Digital Wood Cube Alarm Clock showcasing its primary functions: Time, Alarm, Calendar, 3-Level Brightness, Temperature, and Snooze.

2. Производ је готовview

The ThreeH AC10 is designed with a modern wood cube aesthetic, integrating seamlessly into various home and office environments. Its key features include:

• ЛЕД дисплеј: Shows time, date, and temperature.
• Мултифункционални: Time (12/24H), Alarm (up to 3), Calendar, Temperature (F/C).
• Контрола звука: Display activates with sound or touch, conserving energy.
• Подесива осветљеност: Три нивоа осветљености екрана.
• Опције двоструког напајања: USB cable or AAA batteries.
• Time Memory Function: Retains settings during power interruptions (with backup batteries).

Слика 2.1: Предња страна view of the ThreeH AC10 Digital Wood Cube Alarm Clock.

3. Подешавање

3.1 Напајање

The clock can be powered by either a USB cable or AAA batteries.

• УСБ Снага: For continuous display and optimal performance, connect the provided USB cable to a 5V DC adapter (not included) or a USB port.
• Снага батерије: For portable use or as a backup, install 4 AAA batteries (not included). Note that battery power is primarily for the sound control mode to conserve energy, as continuous display will drain batteries quickly.

3.2 Инсталација батерије

1. Пронађите одељак за батерије на полеђини сата.
2. Отворите поклопац батерије.
3. Уметните 4 нове ААА батерије, водећи рачуна о исправном поларитету (+/-).
4. Добро затворите поклопац батерије.

Image 3.1: Battery compartment and USB cable connection.

3.3 Идентификација дугмади

The control buttons are located on the back of the clock:

• КОМПЛЕТ: Used to enter setting modes and confirm selections.
• УП: Used to increase values or navigate menu options.
• ДОЉЕ: Used to decrease values or navigate menu options.
• РЕСЕТОВАТИ: A small button (often recessed) to reset the clock to factory defaults. Use a thin object like a paperclip to press.

Image 3.2: Back panel with control buttons and power input.

4. Упутство за употребу

4.1 Basic Settings (Time, Date, Temperature Unit)

1. Притисните тастер СЕТ button once to enter the setting mode. The display will flash.
2. Користите UP or ДОВН да подесите вредност. Притисните СЕТ да потврдите и пређете на следеће подешавање.
3. The sequence is typically: Year → Month → Day → 12/24H Format → Hour → Minute → Temperature Unit (Celsius/Fahrenheit).
4. After setting the temperature unit, press СЕТ поново да бисте изашли из режима подешавања.

4.2 Подешавања аларма

The clock supports up to three independent alarms (A1, A2, A3).

1. From normal display mode, press СЕТ repeatedly until 'A1' (or 'A2', 'A3') appears.
2. Притисните и држите СЕТ to enter the alarm setting mode. The alarm hour will flash.
3. Користите UP or ДОВН to set the desired alarm hour, then press СЕТ.
4. Користите UP or ДОВН to set the desired alarm minute, then press СЕТ.
5. The display will show 'ON' or '--' (OFF). Use UP or ДОВН to enable (ON) or disable (OFF) the alarm, then press СЕТ потврдити.
6. Repeat for A2 and A3 if needed.

Image 4.1: Setting multiple alarms (A1, A2, A3).

4.3 Функција одлагања

When an alarm sounds, press any button (except RESET) to activate the snooze function. The alarm will temporarily stop and sound again after a few minutes (default snooze duration is typically 5 minutes, refer to specific product documentation if available for exact duration). To turn off the alarm completely, press the РЕСЕТ button or let it ring for its full duration.

4.4 Display Modes (DP-1, DP-2)

The clock offers different display modes:

• DP-1 (Fixed Display): The display shows time continuously.
• DP-2 (Alternating Display): The display cycles between time, date, and temperature.

To switch between DP-1 and DP-2, press the UP button in normal display mode.

Image 4.2: Display modes DP-1 and DP-2.

4.5 Sound Control Mode (Energy-saving)

In sound control mode, the display will turn off after a short period to save energy. It will reactivate when a sound (e.g., clap, tap) or touch is detected.

• To enable/disable sound control, press the ДОВН button in normal display mode.
• When sound control is active, the display will show 'SD' (Sound Detect) or similar indicator. When disabled, it may show '--' or remain continuously on (if powered by USB).

Image 4.3: Illustration of sound control activation.

4.6 Подешавање осветљености

The display has three brightness levels (L1, L2, L3).

1. Притисните и држите UP button in normal display mode.
2. The display will show the current brightness level (e.g., 'L3').
3. Користите UP or ДОВН to cycle through L1 (lowest), L2 (medium), and L3 (highest).
4. Отпустите UP дугме да потврдите свој избор.

Image 4.4: Brightness levels L1, L2, L3.

5. Одржавање

• Чишћење: Wipe the clock surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Замена батерије: Replace all 4 AAA batteries simultaneously when the display dims or functions become erratic. Do not mix old and new batteries.
• Пласман: Поставите сат на стабилну, равну површину, даље од директне сунчеве светлости, екстремних температура и високе влажности.

КСНУМКС. Решавање проблема

• Display is off or not staying on:
      a. Check if the clock is in Sound Control (SD) mode. Press the ДОВН button to toggle this mode. If you desire a continuous display, ensure SD mode is off and the clock is powered via USB.
      b. If using batteries, they might be low. Replace with fresh AAA batteries.
• Difficulty setting time/alarms:
      a. Ensure you are pressing and holding the СЕТ button to enter the setting mode, and pressing it briefly to confirm each step.
      b. Refer to sections 4.1 and 4.2 for detailed instructions.
• Clock resets after power failure:
      a. Ensure backup AAA batteries are installed and have sufficient charge. The batteries provide power memory during USB power interruptions.
• Display is too bright or too dim:
      a. Adjust the brightness levels as described in section 4.6.
• Нема приказа:
      a. Check power source. Ensure USB cable is securely connected or batteries are correctly installed and charged.
      б. притисните РЕСЕТ button using a thin object to perform a factory reset.

7. Спецификације

8. Гаранција и подршка

For warranty information and customer support, please refer to the documentation included with your purchase or contact the seller directly. Keep your purchase receipt for any warranty claims.