1. Производ је готовview
The Bytech 6FT LED Back Light Strip is designed to illuminate your hardware, providing vibrant multi-color lighting. This versatile LED strip is USB powered and controlled via a 24-key remote, offering 16 distinct colors and various lighting modes to enhance your viewing or gaming experience.
Image 1.1: Bytech 6FT LED Back Light Strip product and packaging.
2. Безбедносне информације
- Ensure the power source is compatible with the USB power requirements of the LED strip.
- Do not expose the LED strip to water or excessive moisture as it is not water resistant. This product is intended for indoor use only.
- Avoid bending the LED strip sharply or applying excessive force, which may damage the internal circuitry.
- Чувати ван домашаја деце.
- Do not attempt to disassemble or modify the product. This will void any potential warranty.
- Unplug the LED strip from the power source before cleaning or when not in use for extended periods.
3. Садржај пакета
Молимо вас да проверите пакет за следеће ставке:
- 1 x Bytech 6FT LED Back Light Strip
- 1 к даљински управљач са 24 тастера
4. Подешавање и инсталација
- Припремите површину: Ensure the surface where you intend to install the LED strip is clean, dry, and smooth. Dust, dirt, or moisture can affect the adhesive's effectiveness.
- Измерите и планирајте: Before removing the adhesive backing, unroll the LED strip and temporarily position it to determine the best placement. The strip is 6 feet long.
- Огулити и залепити: Carefully peel off the protective backing from the adhesive tape on the back of the LED strip. Begin sticking the strip to your desired surface, pressing firmly along its length to ensure good adhesion.
- Повежите се са напајањем: Locate the USB connector on the LED strip. Plug the USB connector into a compatible USB power source (e.g., a TV's USB port, a USB wall adapter, or a power bank).
- Тест функционалност: Once connected, the LED strip should light up. Use the remote control to test different colors and modes.
5. Упутство за употребу
The Bytech 6FT LED Back Light Strip is controlled using the included 24-key remote control. Ensure the remote has a clear line of sight to the LED strip's receiver.
Функције даљинског управљача:
| Дугме | Функција |
|---|---|
| ОН/ОФФ | Turns the LED strip on or off. |
| Осветљење горе/доле | Adjusts the brightness level of the lights. |
| Color Selection Buttons | Directly select from 16 static colors (e.g., Red, Green, Blue, White, various shades). |
| ФЛАСХ | Activates a rapid flashing mode. |
| СТРОБЕ | Activates a slow strobe effect. |
| ФАДЕ | Cycles through colors with a smooth fading transition. |
| СМООТХ | Provides a gradual transition between colors. |
Напомена: The remote control requires a CR2025 button cell battery (not included). Please ensure the battery is inserted with the correct polarity.
6. Одржавање и њега
- Чишћење: To clean the LED strip, first unplug it from the power source. Use a soft, dry cloth to gently wipe away dust or dirt. Do not use liquid cleaners or abrasive materials.
- Складиштење: If storing the LED strip for an extended period, ensure it is clean and dry. Coil it loosely to prevent damage to the strip or wiring. Store in a cool, dry place.
- лепак: The adhesive is designed for single application. Re-applying the strip multiple times may reduce its stickiness.
КСНУМКС. Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| ЛЕД трака не светли. | No power, loose connection, remote battery dead/incorrectly inserted. | Ensure USB is securely plugged into a working power source. Check remote battery and polarity. |
| Даљински управљач не ради. | Remote battery dead, no line of sight to receiver, remote too far. | Replace remote battery. Ensure remote is pointed directly at the strip's receiver. Move closer to the strip. |
| Светла трепере или су неуједначена. | Недовољна снага, оштећена трака. | Try a different USB power source with sufficient output. Inspect the strip for visible damage. |
| Adhesive not sticking. | Surface is dirty, oily, or textured; adhesive backing not fully removed. | Clean and dry the surface thoroughly before application. Ensure the protective film is completely removed. |
8. Спецификације
- Модел: BYOPCA217BK
- Бренд: Битецх
- дужина: 6 стопа (приближно 1.83 метара)
- Тип извора светлости: ЛЕД
- Извор напајања: USB (електрични са каблом)
- Метод контроле: 24-Key IR Remote Control
- Боје: 16 static colors + various dynamic modes
- Унутрашња/спољна употреба: Индоор
- Ниво водоотпорности: Није водоотпоран
- Материјал: Пластика
- Тежина артикла: 2.89 унце (приближно 82 грама)
- УПЦ: 805112051533
9. Гаранција и подршка
Warranty information for the Bytech 6FT LED Back Light Strip is not explicitly provided in the product specifications. For detailed warranty terms, technical support, or customer service inquiries, please contact the manufacturer, DEEJAYLED, or your point of purchase.
You may find contact information on the product packaging or the manufacturer's official webсајту.