Godox TT350N Speedlite Flash for Nikon DSLR Cameras User Manual

1. Увод

Хвала вам на куповиниasing the Godox TT350N Speedlite Flash. This compact and versatile flash unit is designed for Nikon DSLR cameras, offering full TTL functionality, high-speed sync, and a built-in 2.4G wireless X system. This manual provides detailed instructions for proper operation and maintenance to ensure optimal performance.

2. Безбедносне информације

• Увек држите овај производ сувим. Не користити по киши или дamp условима.
• Do not disassemble. If repairs become necessary, this product must be sent to an authorized maintenance center.
• Чувати ван домашаја деце.
• Do not use the flash unit in the presence of flammable gases, chemicals, or other materials.
• Do not touch the flash head immediately after use, as it may be hot.
• Use only AA batteries as specified. Do not mix new and old batteries or different types of batteries.

3. Производ је готовview

3.1 Кључне карактеристике

• Пуна TTL функционалност: Supports HSS (up to 1/8000s), FEC, front and rear curtain sync, multi-flash, and manual flash.
• Dot-Matrix LCD: Provides clear and simple operation with an intuitive display.
• Моћне функције: Includes TTL autoflash, 1/8000 high-speed synchronization, flash exposure compensation, flash exposure lock, and modeling flash.
• Wireless Grouping System: Features a 2.4G wireless system with up to 5 groups and 32 channels to meet various shooting requirements.
• Заштита од прегревања: Designed with protection against overheating for extended use.
• Ефикасне перформансе: Guide Number (GN) of 36 (m ISO 100, @ 105mm), 22 power outputs (1/1-1/128). Recycling time between 0.1 and 2.2 seconds, providing approximately 210 full power flashes with 2500mA Ni-MH batteries.
• Функција зумирања: Automatic and manual zoom from 24mm to 105mm.
• Personal Function Settings (C.Fn): Customizable settings for personalized operation.
• Широка компатибилност: Can act as a master unit to control other Godox slave units (AD600, AD600M, AD360II-C, AD360II-N, V860IIN, V850II, TT685N, TT600) or as a slave unit triggered by Godox master units (X1T-N, V860IIN, V850II, TT685N, TT600).

3.2 Садржај пакета

• 1 x Godox TT350N Flash Unit
• 1 x Мини постоље
• 1 к Заштитна торбица
• 1 x Color Filter
• 1 к Упутство за употребу
• 1 x VFOTO Lens Cleaning Cloth

Image: The Godox TT350N flash unit, mini stand, protective case, color filter, user manual, and lens cleaning cloth are included in the package.

3.3 Називи делова и функције

Image: Detailed diagram showing the various parts of the Godox TT350N flash and their corresponding functions.

1. Zoom Selection Button
2. Дугме за избор режима
3. Custom Function Setting Button (reusable button, long press for 2 seconds)
4. Тест дугме/индикатор спремности за блиц
5. ЛЦД Панел
6. Дугме за синхронизацију велике брзине
7. S1/S2 Optic Slave Triggering Selection Button (in non-wireless mode)
8. Group/Channel Button (reusable button, in wireless mode)
9. Прекидач за напајање
10. Лоцк Ринг
11. Дугме за бежични избор (дугме за вишекратну употребу, дуго притисните 2 секунде)
12. Хотсхое
13. Сет тастер
14. Изаберите Бирај
15. Одељак за батерије
16. Оптички контролни сензор
17. Фокус Ассист Беам
18. Фласх Хеад
19. Цатцхлигхт Панел
20. Уграђени широки панел

4. Подешавање

4.1 Инсталација батерије

The Godox TT350N uses two AA batteries. Ni-MH batteries are recommended for optimal performance and recycling time. Alkaline batteries (LR6) can also be used.

1. Отворите поклопац одељка за батерију који се налази са стране блица.
2. Уметните две АА батерије према индикаторима поларитета (+/-) унутар одељка.
3. Добро затворите поклопац одељка за батерије.

4.2 Монтажа на камеру

To mount the flash unit onto your camera's hotshoe:

1. Loosen the lock ring on the flash unit by turning it counter-clockwise.
2. Slide the flash's hotshoe fully into your camera's hotshoe mount.
3. Tighten the lock ring by turning it clockwise until the flash is securely attached to the camera.

Image: The Godox TT350N flash unit showing its hotshoe for mounting onto a camera.

4.3 Укључивање/искључивање

• To power on, slide the Power Switch to the 'ON' position. The flash will begin charging, and the red flash ready indicator will light up when ready.
• To power off, slide the Power Switch to the 'OFF' position.

5. Радни режими

The TT350N offers various flash modes to suit different shooting scenarios. Press the МОДЕ дугме за циклус кроз доступне режиме.

5.1 TTL режим аутоматског блица

In TTL mode, the flash output is automatically adjusted by the camera to achieve correct exposure. This mode is ideal for quick shooting and changing light conditions.

• Притисните тастер МОДЕ button until 'TTL' is displayed on the LCD panel.
• The flash will automatically adjust its output based on the camera's metering.

5.2 Manual Flash Mode (M)

Manual mode allows you to set the flash output power manually from 1/1 (full power) to 1/128 in 1/3 stop increments. This provides precise control over lighting.

• Притисните тастер МОДЕ button until 'M' is displayed.
• Окрените Изаберите Бирај to adjust the flash output power.

5.3 Multi Flash Mode (Multi)

Multi flash mode (stroboscopic flash) fires a series of rapid flashes during a single exposure, creating multiple images of a moving subject in one frame.

• Притисните тастер МОДЕ button until 'Multi' is displayed.
• Користите Изаберите Бирај и СЕТ button to adjust the flash frequency (Hz), number of flashes, and flash output.

5.4 Брза синхронизација (HSS)

High-Speed Sync allows the flash to synchronize with all camera shutter speeds, up to 1/8000s. This is useful for shooting with wide apertures in bright conditions or freezing fast motion.

• Притисните тастер СИНЦ button to activate HSS. The HSS icon will appear on the LCD.

5.5 First/Second Curtain Sync

First curtain sync fires the flash at the beginning of the exposure. Second curtain sync fires the flash just before the shutter closes, creating a trail of light behind moving subjects.

• These settings are typically controlled via your camera's flash menu. Refer to your camera's manual for specific instructions.

5.6 Компензација експозиције блица (FEC)

FEC allows you to fine-tune the flash output in TTL mode, making the flash brighter or darker by up to ±3 stops in 1/3 stop increments.

• У TTL режиму, притисните СЕТ button. The FEC value will blink.
• Окрените Изаберите Бирај to adjust the FEC value.
• Притисните тастер СЕТ поново дугме за потврду.

5.7 Modeling Flash

The modeling flash fires a brief burst of light to help you preview the lighting effect before taking the actual shot.

• Press the camera's depth-of-field preview button (if available) to activate the modeling flash.

6. Wireless Flash Function

The TT350N supports both 2.4G wireless transmission and optical transmission for off-camera flash control.

6.1 2.4G Wireless Transmission (Master/Slave)

The built-in Godox 2.4G wireless X system allows the TT350N to function as a master or slave unit, controlling or being controlled by other compatible Godox flashes and triggers.

Image: Illustration of the TT350N operating as both a master and slave unit within the Godox 2.4G wireless system.

• Главна јединица: The TT350N can control other Godox slave units such as AD600, AD600M, AD360II-C, AD360II-N, V860IIN, V850II, TT685N, and TT600.
• Slave Unit: The TT350N can be controlled by Godox master units like X1T-N, V860IIN, V850II, TT685N, and TT600.
• To activate wireless mode, long press the ГР/ЦХ button (Wireless Selection Button) for 2 seconds.
• Користите ГР/ЦХ дугме и Изаберите Бирај to set the group (A, B, C) and channel (1-16).
• Ensure all units are set to the same channel and group for proper communication.

6.2 Optical Transmission (S1/S2 Slave)

The TT350N can also function as an optical slave, triggered by another flash unit's light pulse.

• С1 режим: The flash will fire in response to the first flash from a master flash. This mode is suitable for manual flash environments.
• С2 режим: The flash will ignore the pre-flash from a master TTL flash and fire in response to the second flash. This mode is suitable for TTL master flashes.
• To activate S1 or S2 mode, press the СЛОВЕНСКА button (S1/S2 Optic Slave Triggering Selection Button) until 'S1' or 'S2' is displayed.

7. C.Fn Custom Functions

The TT350N features customizable functions (C.Fn) that allow you to tailor the flash's behavior to your preferences.

• Дуго притисните Ц.Фн button for 2 seconds to enter the custom function settings menu.
• Користите Изаберите Бирај to navigate through the available functions.
• Притисните тастер СЕТ button to select a function and then use the Изаберите Бирај да промени своју вредност.
• Притисните тастер СЕТ button again to confirm the change.
• Дуго притисните Ц.Фн button again to exit the custom function settings.

8. Одржавање

• Clean the flash unit regularly with a soft, dry cloth. Avoid using solvents or harsh chemicals.
• Remove batteries when the flash is not in use for an extended period to prevent leakage.
• Чувајте блиц на хладном и сувом месту, даље од директне сунчеве светлости и екстремних температура.
• Избегавајте јаке ударце или испуштање уређаја.

КСНУМКС. Решавање проблема

• Блиц се не пали: Check battery level, ensure flash is securely mounted, verify camera flash settings, and confirm flash is powered on and ready.
• Flash output is too dark/bright: Adjust FEC (Flash Exposure Compensation) in TTL mode or manual power output in M mode. Check camera ISO and aperture settings.
• Wireless triggering issues: Ensure master and slave units are on the same channel and group. Check distance and line of sight for optical triggering. Verify battery levels in all units.
• Flash head does not rotate/tilt smoothly: Do not force movement. If resistance is felt, check for obstructions or contact customer support.

10. Спецификације

11. Гаранција и подршка

Godox products are manufactured to high standards and are guaranteed against manufacturing defects. For warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or visit the official Godox webсајт. Молимо вас да сачувате доказ о куповини за потребе гаранције.