1. Производ је готовview
The Total TWP47506 750W Automatic Jet Water Pump is designed for efficient clean water collection and distribution. It is suitable for drawing water from wells, boreholes, open tanks, and other water supply sources. Primary applications include watering vegetable gardens, personal plots, and ensuring water circulation in fountains and various water features. Its design prioritizes ease of maintenance and portability, featuring an external tank location. The pump incorporates a brushless induction motor for long-lasting, maintenance-free operation. The robust cast iron pump casing can be rotated 90 degrees for flexible installation. This pump is capable of integration into automated water supply systems.
Слика 1: Total TWP47506 750W Automatic Jet Water Pump. This image shows the complete pump unit with its motor and casing.
2. Безбедносна упутства
Read all safety warnings and instructions carefully before operating this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
Општа безбедност
- Увек носите одговарајућу личну заштитну опрему (ППЕ) као што су заштитне наочаре и рукавице.
- Ensure the pump is placed on a stable, level surface to prevent tipping.
- Држите децу и неовлашћена лица даље од радног простора.
- Do not operate the pump in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Never use the pump to transfer flammable, corrosive, or explosive liquids.
- Disconnect the power supply before performing any maintenance, cleaning, or when the pump is not in use.
Елецтрицал Сафети
- Уверите се да је напајање волtage matches the specifications on the pump's rating label (220-240V, 50Hz).
- Use a properly grounded outlet. Do not modify the plug.
- Do not expose the pump or electrical connections to rain or wet conditions.
- Avoid using extension cords unless absolutely necessary. If an extension cord is used, ensure it is rated for outdoor use and has the correct gauge for the pump's power requirements.
- Never carry the pump by its power cord.
- Regularly inspect the power cord for damage. If damaged, have it replaced by a qualified electrician.
3. Садржај пакета
Проверите да ли су све ставке наведене у наставку присутне и да нису оштећене приликом распакивања:
- 1 x Total TWP47506 750W Automatic Jet Water Pump
- 1 к прекидач притиска
- 1 x Stainless Steel Hose
- 1 к Манометар
- 1 x Three-way Brass Fitting
- Кориснички приручник (овај документ)
4. Техничке спецификације
| Спецификација | Валуе |
|---|---|
| Број модела | ТВП47506 |
| Тип | Self-priming Automatic Jet Pump |
| Називна снага | 750В (1.0 ХП) |
| Волtage | 220-240В |
| Фреквенција | 50Хз |
| Мак Хеад | 45 метара |
| Мак Флов | 60 литара у минути |
| Мак суцтион | 9 метара |
| Пречник цеви | 1 к 1 инча |
| Тип мотора | Copper Wire Induction Motor (Brushless) |
| Материјал радног кола | нерђајући челик |
| Пумпа Цasing Материјал | Ливено гвожђе |
| Цабле Ленгтх | 0.3 метара |
| Tank Capacity (Cylindrical) | 24 литара |
| Димензије производа (Д к Ш к В) | 30 к 19 к 22 цм |
| Тежина артикла | 1.5 кг |
| Боја | Сребро |
5. Подешавање и инсталација
5.1 Постављање
- Position the pump on a firm, level, and dry surface.
- Ensure adequate ventilation around the pump to prevent overheating.
- Protect the pump from direct exposure to weather elements (rain, direct sunlight, frost).
- Keep the pump as close as possible to the water source to minimize suction lift and maximize efficiency.
5.2 Повезивање цеви
The pump is equipped with standard inch fittings for both suction and discharge pipes.
- Усисна цев: Connect a rigid, airtight suction pipe (1 inch diameter) to the pump's inlet. Ensure all connections are sealed to prevent air leaks, which can affect priming and pump performance. A foot valve with a strainer should be installed at the end of the suction pipe submerged in the water source to prevent debris from entering the pump and to maintain prime.
- Одводна цев: Connect a discharge pipe (1 inch diameter) to the pump's outlet. Use the provided three-way brass fitting, pressure switch, and pressure gauge as part of your water supply system. Ensure all connections are secure.
5.3 Пумпање пумпе
This is a self-priming pump, but initial priming is crucial for proper operation. Before first use or after the pump has run dry:
- Уверите се да је усисна цев потпуно потопљена у извор воде.
- Locate the priming plug on the top of the pump casing.
- Unscrew the priming plug and slowly fill the pump casing with clean water until it overflows.
- Replace and securely tighten the priming plug.
- Open any valves on the discharge side to allow air to escape during startup.
5.4 Електрични прикључак
- Connect the pump's power cord to a grounded electrical outlet (220-240V, 50Hz).
- Ensure the electrical circuit is protected by a Residual Current Device (RCD) for added safety.
6. Операција
6.1 Покретање пумпе
- Ensure the pump has been properly primed (Section 5.3).
- Verify all pipe connections are secure and leak-free.
- Plug the pump into the power outlet. The pump will start automatically if connected to an automated system with a pressure switch.
- Observe the pressure gauge. The pressure should rise as the pump builds pressure.
- If the pump does not draw water within a few minutes, switch it off, re-prime, and check for air leaks in the suction line.
6.2 Аутоматски рад
When integrated into a water supply system with the included pressure switch, the pump will automatically start when water pressure drops (e.g., when a tap is opened) and stop when the desired pressure is reached (e.g., when the tap is closed). The 24-liter cylindrical tank helps maintain consistent pressure and reduces pump cycling.
6.3 Заустављање пумпе
For temporary shutdown, close all water outlets. The pump will stop automatically if operating in an automated system. For complete shutdown or extended periods of non-use, unplug the pump from the power supply.
7. Одржавање
Regular maintenance ensures optimal performance and extends the lifespan of your pump. Always disconnect the power supply before performing any maintenance.
7.1 Редовне провере
- Прегледајте кабл за напајање и утикач да ли има знакова оштећења.
- Check all pipe connections for leaks. Tighten if necessary.
- Ensure the foot valve strainer is clear of debris. Clean if clogged.
- Ослушкујте необичне звукове током рада, који могу указивати на проблем.
7.2 Чишћење
Обришите спољашњост пумпе огласомamp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the motor's ventilation openings are free from dust and debris.
7.3 Припрема за зиму (за хладне климатске услове)
If the pump is exposed to freezing temperatures, it must be drained to prevent damage:
- Искључите напајање.
- Drain all water from the pump casing by unscrewing the drain plug (if present) or by tilting the pump.
- Disconnect the suction and discharge pipes and drain them completely.
- Чувајте пумпу на сувом месту, заштићеном од мраза.
КСНУМКС. Решавање проблема
Пре него што контактирате корисничку подршку, погледајте следећу табелу за уобичајене проблеме и решења.
| Проблем | Могући узрок | Решење |
|---|---|---|
| Пумпа се не покреће | Нема напајања Неисправан кабл за напајање/утикач Заштита од преоптерећења мотора се активирала |
Проверите прикључак за напајање и утичницу Прегледајте и замените ако је оштећено Allow motor to cool, then restart. Check for blockages. |
| Pump runs but no water is delivered | Пумпа није пуњена Цурење ваздуха у усисном воду Подизање усисавања је превисоко Foot valve clogged or stuck Извор воде празан |
Re-prime the pump (Section 5.3) Check all suction connections for leaks and tighten Relocate pump closer to water source Clean or replace foot valve Ensure adequate water in source |
| Низак проток или притисак | Partial blockage in pipes/impeller Цурење ваздуха у усисном воду Истрошено радно коло Incorrect pressure switch setting |
Inspect and clear blockages Check and seal suction connections Контактирајте квалификовано сервисно особље Adjust pressure switch according to manufacturer guidelines (if adjustable) |
| Пумпа се често укључује и искључује | Leak in discharge system Pressure tank pre-charge incorrect Неисправан прекидач притиска |
Check for leaks in pipes, fittings, or fixtures Check and adjust pressure tank air pre-charge Inspect and replace pressure switch if necessary |
9. Гаранција и подршка
This Total TWP47506 750W Automatic Jet Water Pump comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including warranty period and coverage details.
For technical assistance, spare parts, or warranty claims, please contact Total customer support through your retailer or visit the official Total website for contact information in your region. When contacting support, please have your model number (TWP47506) and purchase date available.