1. Увод
This manual provides essential information for the proper use, maintenance, and safety of General Pump 758-115 Pressure Washer Pump Oil. This product is a high-quality, 30-weight, non-detergent oil specifically formulated for use in pressure washer pumps. Adhering to these instructions will help ensure the longevity and optimal performance of your pressure washer pump.
2. Безбедносне информације
Always prioritize safety when handling any petroleum-based product. Read and understand all safety warnings before use.
2.1 Опште мере предострожности
- Чувати ван домашаја деце и кућних љубимаца.
- Избегавајте продужени контакт са кожом. Темељно оперите руке након руковања.
- Не гутати. У случају гутања, не изазивати повраћање. Одмах потражити медицинску помоћ.
- Avoid eye contact. In case of contact, flush eyes with plenty of water for several minutes. If irritation persists, seek medical attention.
- Користите у добро проветреном простору.
- Чувати на хладном и сувом месту, даље од директне сунчеве светлости и извора топлоте.
- Држите посуду чврсто затворену када се не користи.
2.2 Заштита од пожара
This product is combustible. Keep away from open flames, sparks, and other ignition sources.
2.3 Одлагање
Dispose of used oil and empty containers in accordance with all local, state, and federal regulations. Do not pour used oil down drains or onto the ground.
3. Производ је готовview
Image 1: General Pump 758-115 Pressure Washer Pump Oil bottle. This image shows a black bottle with a white label, indicating the brand and product type.
General Pump 758-115 is a specialized 30-weight, non-detergent oil designed for the demanding environment of pressure washer pumps. Its formulation helps protect internal pump components from wear and corrosion, ensuring smooth operation and extending the life of the pump. This oil is supplied in 16 oz. bottles, typically sold in cases of six.
4. Подешавање и почетна употреба
Before adding or changing pump oil, ensure your pressure washer is turned off, unplugged (if electric), and depressurized. Refer to your pressure washer's specific pump manual for exact oil capacity and fill port locations.
4.1 Провера нивоа уља
- Locate the oil sight glass or dipstick on your pressure washer pump.
- Ensure the pressure washer is on a level surface.
- The oil level should typically be at the center of the sight glass or between the 'MIN' and 'MAX' marks on the dipstick.
- If the level is low, proceed to add oil.
4.2 Adding Oil
- Unscrew the oil fill cap or remove the dipstick.
- Slowly pour General Pump 758-115 oil into the pump's oil reservoir.
- Add oil gradually, checking the level frequently using the sight glass or dipstick, until the correct level is reached. Do not overfill.
- Replace the oil fill cap or dipstick securely.
5. Упутства за рад
This product is an oil for the pump, not a fuel or cleaning agent. It is used internally within the pressure washer pump system.
5.1 Наменска употреба
General Pump 758-115 oil is specifically formulated for lubricating the internal components of pressure washer pumps. It is not intended for use in engines, transmissions, or other applications requiring different oil specifications.
5.2 Компатибилност
Always verify that 30-weight, non-detergent oil is the correct specification for your pressure washer pump model. Consult your pressure washer's owner's manual for recommended oil types.
6. Одржавање
Regular oil changes are crucial for maintaining the performance and extending the lifespan of your pressure washer pump.
6.1 Oil Change Frequency
- Initial Oil Change: It is often recommended to change the pump oil after the first 50 hours of operation (break-in period) for new pumps.
- Редовне замене уља: Subsequently, change the pump oil every 3-6 months or after every 200-300 hours of operation, whichever comes first. Refer to your pressure washer pump's manual for precise recommendations.
6.2 Changing Pump Oil
- Ensure the pressure washer is off, unplugged, and depressurized.
- Place a suitable drain pan beneath the pump's oil drain plug.
- Remove the oil drain plug and the oil fill cap (or dipstick) to allow the old oil to drain completely.
- Once drained, replace the oil drain plug securely.
- Fill the pump with fresh General Pump 758-115 oil to the correct level, as described in Section 4.2.
- Replace the oil fill cap or dipstick.
- Dispose of used oil responsibly (see Section 2.3).
КСНУМКС. Решавање проблема
This section addresses common issues related to pressure washer pump oil.
| Проблем | Могући узрок | Решење |
|---|---|---|
| Pump oil level is low | Normal consumption or minor leak | Add General Pump 758-115 oil to the correct level. Inspect for leaks if consumption is excessive. |
| Уље изгледа млечно или мутно | Water contamination in the pump oil | Change the pump oil immediately. Inspect pump seals for damage and repair as necessary to prevent further water ingress. |
| Pump is noisy or overheating | Low oil level, incorrect oil type, or old/degraded oil | Check oil level and add if low. Ensure General Pump 758-115 (30-weight, non-detergent) is used. Change oil if it is old or discolored. |
8. Спецификације
- Бренд: Генерал Пумп
- Модел: 758-115
- вискозитет: 30 тежина
- Формулација: Уље без детерџента
- Образац ставке: уље
- Liquid Volume: 16 Fluid Ounces (per bottle)
- Информације о пакету: Bottle (typically sold in cases of 6)
- Произвођач: Генерал Пумп
9. Гаранција и подршка
Specific warranty information for General Pump 758-115 Pressure Washer Pump Oil is typically provided by the point of purchase or directly by General Pump. Please retain your purchase receipt for warranty claims.
For technical support, product inquiries, or to locate authorized service centers, please contact General Pump customer service or visit their official website. Always refer to your pressure washer's owner's manual for pump-specific maintenance and troubleshooting.