Velleman VM130N 2-Channel RF Remote Control Set

Увод

The Velleman VM130N is a compact universal receiver and transmitter set designed for wireless control of electronic devices. This version is an enhanced model of the VM130 set, featuring an integrated LED flashlight on the transmitter. It provides reliable control with a maximum range of 30 meters in unobstructed environments.

The VM130N is compatible with other Velleman RF products, including the VM108 2-channel RF code transmitter and the VM109 2-channel RF transmitter and receiver set.

Сетуп

Инсталација пријемника

The receiver unit is designed for fixed installation. Ensure it is placed in a location where it can receive signals from the transmitter without excessive interference.

• Напајање: Connect the receiver to a power source of 9 to 13 Vac or 10 to 15 Vdc. A 24 V supply is possible if additional components are used (refer to detailed wiring diagrams in the full manual, if available).
• Веза уређаја: The receiver features two NO/NC (Normally Open/Normally Closed) relay contact outputs. Connect the electronic devices you wish to control to these contacts. Each output can handle an ohmic load of up to 5 A.
• Антена: Connect the external antenna to the designated terminal on the receiver for optimal range.
• Монтажа: The receiver unit has mounting holes for secure installation.

Подешавање предајника

The transmitter is powered by a 12V battery, which is included. It comes pre-programmed with a unique 32-bit code, offering over 1,000,000,000 unique combinations for enhanced security. The code can be easily changed if required.

Pairing Transmitters (Learning Mode)

The receiver can store up to 31 different transmitters. Refer to the detailed instructions for entering the receiver's learning mode and pairing new transmitters. This process typically involves pressing a button on the receiver and then activating the transmitter to register its unique code.

Оперативни

Функције пријемника

• Режим излаза: Each of the two relay outputs can be configured for either a преклопити function (press once to activate, press again to deactivate) or a пулс function (activates for a set duration).
• пулсни тајмер: When the pulse function is selected, a switch-off timer can be set to durations of 0.5s, 5s, 30s, 1 min, 5 min, 15 min, 30 min, or 60 min.
• ЛЕД дисплеј: The receiver features an LED display that indicates the current status, power supply, and timer activity.
• Cold Environment Heating: An internal heating resistance can be selected for operation in cold environments to ensure optimal performance.

Функције предајника

• даљински управљач: Pressing the buttons on the transmitter sends a 433 MHz RF signal to the paired receiver, activating the configured output.
• Command Indicator: An LED on the transmitter illuminates to confirm that a command has been sent.
• ЛЕД лампа: The transmitter includes an integrated LED flashlight for convenience.

Одржавање

Замена батерије предајника

The transmitter is powered by a 12V battery. If the LED command indicator dims or the operational range decreases significantly, it is likely time to replace the battery. Open the transmitter casing carefully, replace the old battery with a new 12V battery of the same type, and reassemble.

Чишћење

Clean the receiver and transmitter units with a dry, soft cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the casinг или унутрашње компоненте.

Cold Environment Heating

If the receiver is installed in an environment where temperatures frequently drop below freezing, ensure the internal heating resistance option is enabled to maintain optimal performance and prevent condensation.

Решавање проблема

• No Response from Receiver:
  • Check if the receiver is correctly powered.
  • Verify the transmitter battery. Replace if necessary.
  • Ensure the transmitter is within the 30-meter range and there are no significant obstacles blocking the signal.
  • Confirm the transmitter is correctly paired with the receiver.
• Reduced Operating Range:
  • Check the transmitter battery level.
  • Ensure the receiver's external antenna is properly connected and positioned.
  • Minimize physical obstructions between the transmitter and receiver.
  • Check for potential RF interference from other devices operating on the 433 MHz frequency.
• Incorrect Output Function:
  • Review the receiver's settings to ensure the correct toggle or pulse function is selected for the desired output.
  • If using the pulse function, verify the timer setting is appropriate.

Спецификације

Receiver (VM130N)

• Напајање: 9 to 13 Vac or 10 to 15 Vdc (24 V possible with additional components)
• Потрошња: < 20 mA in standby (heating off)
• Релејни контакти: 2 x NO/NC, 5 A each (ohmic load)
• Радна фреквенција: 433 МХз
• Timer Settings (Pulse Function): 0.5s, 5s, 30s, 1 min, 5 min, 15 min, 30 min, 60 min
• Карактеристике: Selectable internal heating resistance for cold environments
• Опсег: До 30 м (без препрека)
• Антена: Екстерни
• Димензије: 78 x 78 x 29 mm (3'' x 3'' x 1.14'')

Transmitter (VM130N)

• Напајање: 12 В батерија (укључена)
• Радна фреквенција: 433 МХз
• код: Unique 32-bit, over 1,000,000,000 unique codes
• Карактеристике: Integrated LED flashlight, LED command indicator
• Димензије: 63 x 35 x 13 mm (2.5'' x 1.4'' x 0.5'')

Усклађеност

The device complies with R&TTE (ETS 300-220) standards. Approval is valid only for countries within the EU.

Подршка и гаранција

For technical assistance, warranty information, or further inquiries, please contact your retailer or visit the official Velleman website. An easily accessible helpdesk is available to provide support.

Више информација и ресурса за подршку можете пронаћи на Velleman Brand Store.