EPEVER Tracer1210AN MPPT Solar Charge Controller User Manual

1. Увод

The EPEVER Tracer1210AN MPPT Solar Charge Controller is designed to efficiently manage power from your solar panels to charge batteries. It features advanced Maximum Power Point Tracking (MPPT) technology, ensuring high tracking efficiency of over 99.5%. This controller supports 12V and 24V battery systems automatically and can handle a maximum PV input voltage of 100V. It is compatible with various battery types, including sealed lead-acid, gel, flooded, and lithium batteries. The built-in LCD screen displays key charging parameters, and multiple connectivity options allow for personalized settings and monitoring via remote meter, mobile app, or PC software.

2. Карактеристике производа

The Tracer1210AN controller integrates several features for optimal performance and user interaction.

• ЛЦД екран: Shows real-time operating data and fault information.
• Изаберите дугме: Used to navigate through different display interfaces.
• Дугме Ентер: Used to confirm selections or enter settings menus.
• Монтажне рупе: For secure installation of the controller.
• Порт температурног сензора: Connects the Remote Temperature Sensor (RTS) for accurate battery temperature compensation.
• Solar Panel Terminals: Connects to the solar panel array.
• Терминали батерије: Повезује се на банку батерија.
• Load Terminals: Connects to DC loads.
• COM Port (RS485): For communication with accessories like the MT50 remote meter, PC software, or mobile app.

3. Подешавање и инсталација

Proper installation is crucial for the safe and efficient operation of your solar charge controller. Follow these steps carefully.

3.1 Распакивање и компоненте

Before installation, ensure all components are present and undamaged. The package typically includes the Tracer1210AN controller, an MT50 remote meter, a Remote Temperature Sensor (RTS), and an RS485 PC communication cable.

3.2 Дијаграм ожичења

Connect the components in the specified order to prevent damage. The connection order is: Battery → Solar Panel → Load. The disassembly order is the reverse: Load → Solar Panel → Battery.

3.3 Communication Ports and Accessories

The controller features various ports for enhanced monitoring and control.

• Remote Temperature Sensor (RTS): Connect the RTS300R47K3.81A to the designated port for accurate battery temperature compensation. The standard cable length is 3m.
• РС485 комуникациони порт: This RJ45 port allows connection to various accessories for monitoring and parameter setting.

3.4 Кораци инсталације

1. Mount the controller securely using the provided mounting holes.
2. Connect the battery to the controller's battery terminals. Ensure correct polarity.
3. Connect the solar panel to the controller's solar panel terminals. Ensure correct polarity.
4. Connect the DC loads to the controller's load terminals. Ensure correct polarity.
5. Connect the temperature sensor probe to the controller.

3.5 Video: Unboxing and Installation

Watch this video for a visual guide on unboxing and installing the EPEVER Tracer-AN controller and its accessories.

4. Упутство за употребу

This section covers basic operation and how to configure essential settings on your controller.

4.1 Режим ручног управљања

The controller supports manual control of the load. Press the 'ENTER' button to toggle the load on or off.

4.2 Setting the Battery Type

It is essential to set the correct battery type for optimal charging and battery longevity. The controller supports various battery types including Sealed (default), Gel, Flooded, and different Lithium battery configurations.

Да бисте подесили тип батерије:

1. Press and hold the 'ENTER' button for 5 seconds when the battery voltage interface is displayed.
2. Press the 'SELECT' button when the battery type interface is flashing to cycle through available battery types.
3. Press the 'ENTER' button to confirm your selection.

4.3 Setting the Load Mode

The load working mode determines how the connected DC loads operate. Options include Light ON/OFF, various timer settings, test mode, and manual mode.

To set the load mode:

1. Press and hold the 'ENTER' button for 5 seconds when the load mode interface is displayed.
2. Press the 'SELECT' button when the load mode interface is flashing to cycle through available modes.
3. Press the 'ENTER' button to confirm your selection.

5. Спецификације

Below are the technical specifications for the Tracer1210AN MPPT Solar Charge Controller.

6. Прибор

The EPEVER Tracer1210AN controller is often bundled with or compatible with several accessories to enhance its functionality.

• MT50 Remote Meter: This remote meter can display various operating data and fault information. It features easy-to-operate buttons and a clear numeric display. It is used for monitoring and setting controller parameters.



• Remote Temperature Sensor (RTS300R47K3.81A): Acquires battery temperature for accurate temperature compensation of control parameters. The standard length of the cable is 3m.
• USB to RS485 Cable (CC-USB-RS485-150U): Used to connect the controller to a PC for monitoring and setting parameters via Solar Station PC software. The cable length is 1.5m.



• OTG Cable (OTG-12CM): Used to connect a mobile communication cable to achieve real-time monitoring and parameter modification via a mobile APP.
• WiFi Serial Adapter (eBox-WiFi-01): Allows monitoring and setting parameters via mobile APP software through WiFi signals.
• RS485 to Bluetooth Adapter (eBox-BLE-01): Enables monitoring and setting parameters via mobile APP software through Bluetooth signals.
• Logger (eLOG01): Records the operating status of the controller for later review.

КСНУМКС. Решавање проблема

If you encounter issues with your EPEVER Tracer1210AN controller, refer to the following common troubleshooting tips:

• Нема дисплеја на ЛЦД-у: Check battery connections and ensure the battery voltagе је у радном опсегу.
• Без пуњења: Verify solar panel connections and ensure sufficient sunlight. Check for any shading on the solar panels. Confirm the battery type setting is correct.
• Учитавање не ради: Check load connections and ensure the load mode is set correctly (e.g., Manual ON, Light ON/OFF). Verify that the battery voltagе је изнад ниске волtage disconnect threshold.
• Нетачно очитавање температуре: Ensure the Remote Temperature Sensor (RTS) is properly connected and positioned near the battery.
• Проблеми са комуникацијом: Check the RS485 cable connections to the remote meter, PC, or adapter. Ensure drivers are installed for PC communication.

For more detailed troubleshooting, consult the full product manual or contact EPEVER customer support.

8. Одржавање

Regular maintenance helps ensure the longevity and optimal performance of your solar charge controller.

• чистоћа: Одржавајте контролер чистим и без прашине и прљавштине. Користите суву крпу за чишћење.
• Везе: Periodically check all wiring connections for tightness and corrosion. Loose connections can cause overheating and damage.
• вентилација: Ensure adequate airflow around the controller to facilitate heat dissipation. Do not block the heat sink fins.
• Здравље батерије: Запремина батерије монитораtage and health regularly. Ensure the battery type setting on the controller matches your battery.
• Ажурирања фирмвера: Проверите произвођача website for any available firmware updates to improve performance or add new features.

9. Гаранција и подршка

EPEVER products are designed for reliability and performance. For warranty information and technical support, please refer to the official EPEVER webсајт или контактирајте свог локалног дистрибутера.

You can also visit the official iSunergy store on Amazon for product information and support: iSunergy Amazon Store.