Behringer TD-3
Behringer TD-3 аналогни бас линијски синтисајзер - упутство за употребу
Model: TD-3 | Brand: Behringer
Увод
This manual provides essential information for the setup, operation, and maintenance of your Behringer TD-3 Analog Bass Line Synthesizer. The TD-3 is an authentic reproduction of original circuitry, featuring a Voltagе Контролисани осцилатор (VCO), вол.tage Controlled Filter (VCF), 16-step sequencer, and distortion effects. It is designed to deliver classic bass and groove sounds with true analog circuitry.
Безбедносна упутства
Please read these instructions carefully before operating the device. Keep this manual for future reference. Always follow basic safety precautions to reduce the risk of fire, electric shock, and injury to persons. Do not expose this appliance to rain or moisture. Do not use this apparatus near water. Clean only with a dry cloth. Refer all servicing to qualified service personnel.
Садржај пакета
The Behringer TD-3-RD Analog Bass Line Synthesizer package includes:
- Behringer TD-3-RD Analog Bass Line Synthesizer
- Повер Адаптер
- Упутство за употребу
Производ је завршенview
The TD-3 is an analog bass line synthesizer designed for bass and groove sounds. It features an authentic reproduction of original circuitry with matched transistors, a pure analog signal path based on legendary VCO, VCF, and VCA designs.
Слика 1: Предња страна view of the Behringer TD-3-RD Analog Bass Line Synthesizer, showing controls for tune, cutoff, resonance, envelope, decay, accent, distortion, volume, and the 16-step sequencer interface.
Слика 2: Под углом view of the Behringer TD-3-RD Analog Bass Line Synthesizer, highlighting its compact design and various control knobs and buttons.
Кључне карактеристике:
- Sawtooth and square waveform VCO with transistor wave-shaping circuitry.
- 4-pole low-pass resonant filter with cut-off, resonance, envelope, decay and accent controls.
- 16-step sequencer for pattern creation.
- Built-in distortion effects.
- 16-voice Poly Chain capability.
Сетуп
Прикључак за напајање:
Connect the provided power adapter to the DC input on the rear panel of the TD-3. Plug the adapter into a suitable power outlet. Ensure the power switch is in the 'OFF' position before connecting the power supply.
Аудио излаз:
Connect the main audio output (1/4-inch TS jack) to your mixer, audio interface, or amplifier. For monitoring, headphones can be connected to the dedicated headphone jack.
МИДИ повезивање:
For external control or synchronization, connect MIDI cables to the MIDI IN and MIDI OUT ports. The TD-3 also supports USB MIDI for computer connectivity.
Оперативни
Основна операција:
- Укључено: Flip the power switch to the 'ON' position.
- Контрола јачине звука: Adjust the MASTER VOLUME knob to set the overall output level.
- Sound Generation: The TD-3 features a VCO (Voltage Controlled Oscillator) for generating the core sound. Use the WAVEFORM switch to select between Sawtooth and Square waves.
- Контрола филтера: ВЦФ (Волtage Controlled Filter) section allows you to shape the timbre. Adjust CUTOFF, RESONANCE, ENVELOPE, DECAY, and ACCENT knobs to modify the filter's characteristics.
Дизајн звука
ВЦО (Волtagе Контролисани осцилатор):
The VCO is the primary sound source. Select between a rich Sawtooth wave or a punchy Square wave using the WAVEFORM switch. The TUNE knob adjusts the overall pitch of the oscillator.
ВЦФ (Волtagе Контролисани филтер):
The 4-pole low-pass resonant filter is crucial for shaping the TD-3's signature sound. Experiment with the following controls:
- ОДРЕЗАТИ: Determines the frequency at which the filter starts to attenuate higher frequencies.
- РЕЗОНАНЦИЈА: Boosts frequencies around the cutoff point, creating a more pronounced and sometimes
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.