EDUP EP-9651GS-R PCI-E WiFi 6 Network Card with Bluetooth 5.2 Instruction Manual

1. Увод

This manual provides comprehensive instructions for the installation, operation, and maintenance of your EDUP EP-9651GS-R PCI-E WiFi 6 Network Card. This device is designed to enhance your desktop PC's wireless connectivity with Wi-Fi 6 (802.11ax) technology and Bluetooth 5.2 capabilities, compatible with Windows 10 and Windows 11 64-bit operating systems. Please read this manual carefully before installation to ensure proper setup and optimal performance.

2. Садржај пакета

Проверите да ли су све ставке наведене у наставку укључене у ваш пакет. Ако неке ставке недостају или су оштећене, обратите се продавцу.

• 1 x EDUP EP-9651GS-R PCI-E WiFi 6 Network Card
• 2 x 6dBi Dual Band Antennas
• 1 x Bluetooth 9-pin USB Cable
• 1 к Лов-проfile Bracket (for small form factor PCs)
• 1 к одвијач
• Монтажни завртњи
• 1 x Driver CD (or download instructions)

3. Подешавање и инсталација

3.1 Инсталација хардвера

Follow these steps to install the network card into your desktop PC. Ensure your computer is powered off and unplugged before proceeding.

1. Припремите свој рачунар: Power off your computer and unplug the power cord. Open the side panel of your PC case.
2. Locate a PCI-E slot: Identify an available PCI-E X1, X4, X8, or X16 slot on your motherboard. This card is not compatible with standard PCI slots.
3. Insert the Network Card: Carefully align the network card with the chosen PCI-E slot and press it firmly until it is securely seated.
4. Connect the Bluetooth Cable: Locate the 9-pin USB header (often labeled F_USB) on your motherboard. Connect the white end of the provided Bluetooth 9-pin USB cable to the corresponding port on the network card, and the other end to the 9-pin USB header on your motherboard. This connection is essential for Bluetooth functionality.
   

   Image: The Bluetooth 9-pin USB cable connecting the EDUP WiFi 6 card to the motherboard's USB header.

5. Обезбедите картицу: Use the provided screws to secure the network card's bracket to your PC case. If you have a small form factor PC, use the included low-profile заграда.
6. Прикључите антене: Screw the two 6dBi dual-band antennas onto the connectors at the back of the network card. Adjust their position for optimal signal reception.
   

   Image: The EDUP WiFi 6 network card with its two external antennas installed on the rear of a PC case.
7. Затвори кућиште рачунара: Replace the side panel of your PC case and reconnect the power cord.

3.2 Инсталација драјвера

After hardware installation, you need to install the drivers for both Wi-Fi and Bluetooth functionality. This card is compatible with Windows 10/11 64-bit.

1. Using the Driver CD: Insert the provided driver CD into your optical drive and follow the on-screen instructions to install the Wi-Fi and Bluetooth drivers.
2. Преузимање драјвера: If your PC does not have an optical drive or if you encounter issues with the CD, download the latest drivers from the official Intel webсајт или EDUP webсајт (szedup.com). Тражи drivers compatible with the Intel AX200 chipset.
3. Процес инсталације: Покрените преузету инсталацију драјвера files. Follow the prompts, accepting the license agreements and completing the installation. A system restart may be required after installation.

4. Упутство за употребу

4.1 Повезивање на Ви-Фи

Once the drivers are installed, you can connect to a wireless network:

1. Click the Wi-Fi icon in the system tray (usually in the bottom-right corner of your screen).
2. Изаберите жељену Wi-Fi мрежу са листе.
3. Кликните на „Повежи се“ и унесите безбедносни кључ мреже (лозинку) ако се то од вас затражи.
4. Your PC should now be connected to the Wi-Fi network.

4.2 Connecting Bluetooth Devices

To connect Bluetooth devices, ensure the Bluetooth 9-pin cable is correctly installed.

1. Go to Windows Settings > Devices > Bluetooth & other devices.
2. Ensure Bluetooth is turned "On".
3. Кликните на „Додај Блутут или други уређај“ и изаберите „Блутут“.
4. Ставите свој Блуетоотх уређај у режим упаривања.
5. Изаберите свој уређај са листе и пратите упутства на екрану да бисте завршили упаривање.

5. Спецификације

КСНУМКС. Решавање проблема

If you encounter issues with your EDUP network card, refer to the following common solutions:

• No Wi-Fi or Bluetooth detected:
  • Ensure the card is securely seated in the PCI-E slot.
  • Verify that the Bluetooth 9-pin USB cable is correctly connected to both the card and the motherboard.
  • Check Device Manager in Windows to see if the Wi-Fi and Bluetooth adapters are recognized and have no error symbols.
  • Reinstall the latest drivers from the Intel or EDUP webсајту.
• Слаб Wi-Fi сигнал или мале брзине:
  • Adjust the position of the external antennas for better reception.
  • Ensure your router supports Wi-Fi 6 (802.11ax) for optimal performance.
  • Проверите да ли има сметњи од других електронских уређаја.
  • Ажурирајте фирмвер вашег рутера.
• Блутут не ради:
  • Confirm the Bluetooth 9-pin USB cable is connected. This cable is mandatory for Bluetooth functionality.
  • Уверите се да је Bluetooth омогућен у подешавањима Windows-а.
  • Reinstall the Bluetooth driver.

7. Гаранција и подршка

EDUP provides a 3-year manufacturer replacement warranty for this product. Additionally, a 90-day no-questions-asked return policy is offered. For any assistance, technical support, or warranty claims, please contact us via Amazon message. We are committed to providing prompt and helpful service.