BAFANG C965 LCD Display User Manual

1. Увод

This user manual provides detailed instructions for the installation, operation, and maintenance of your BAFANG C965 LCD Display. This display is designed for use with Bafang Mid Drive motors that utilize the UART communication protocol. Please read this manual thoroughly before using the product to ensure safe and correct operation.

The BAFANG C965 LCD Display offers essential information for your electric bicycle, including speed, battery level, assistance level (PAS), and trip data, enhancing your riding experience.

2. Безбедносне информације

• Always ensure the display is securely mounted and all cables are properly connected before riding.
• Do not attempt to open or modify the display unit. This may void the warranty and cause damage.
• Keep the display screen clean and free from obstructions to ensure clear visibility of information.
• Avoid exposing the display to extreme temperatures or direct sunlight for prolonged periods.
• In case of malfunction, refer to the troubleshooting section or contact Bafang support.

3. Садржај пакета

Проверите да ли су све ставке присутне у вашем пакету:

• BAFANG C965 LCD Display Unit
• Handlebar Mounting Bracket
• Control Button Unit
• Кориснички приручник (овај документ)

4. Подешавање и инсталација

Follow these steps to install your BAFANG C965 LCD Display:

1. Монтажа дисплеја: Attach the handlebar mounting bracket to your bicycle's handlebar. The bracket is compatible with handlebar diameters of 22.2mm, 25.4mm, and 31.8mm. Secure the C965 display unit into the bracket.
2. Прикључни каблови: Connect the 5-pin female connector from the display unit to the corresponding male connector on your Bafang Mid Drive motor system. Ensure the connection is firm and secure.
3. Mounting Control Buttons: Position the external control button unit on your handlebar within easy reach. Connect its cable to the display unit.

Figure 1: Bafang C965 LCD display unit with cables and mounting bracket.

Figure 2: Bafang C965 LCD display mounted on an e-bike handlebar.

5. Упутство за употребу

Once installed, operate your BAFANG C965 LCD Display as follows:

• Укључивање/искључивање: Press and hold the power button on the external control unit to turn the display on or off.
• Подешавање нивоа PAS-а: Use the '+' and '-' buttons on the control unit to increase or decrease the Pedal Assist System (PAS) level.
• Приказ информација: The display cycles through various information screens. Use the 'M' (Mode) button to switch between different data views such as trip distance, total distance, average speed, max speed, and time.
• Контрола фарова: If your e-bike system supports it, a dedicated button or a long press of a specific button (refer to your motor's manual) may control the headlights.

Figure 3: Bafang C965 LCD display showing active riding data.

6. Display Functions and Indicators

The C965 display provides various indicators and data points:

• Приказ брзине: Shows current speed, average speed (AVG), and maximum speed (MAX).
• Индикатор батерије: Displays the remaining battery charge level.
• ПАС ниво: Indicates the current pedal assist level (0-9 or 0-3, depending on configuration).
• Индикатор километраже: Shows trip distance and total odometer reading.
• Индикатор напајања: Displays real-time motor power output.
• време: Current time or trip duration.
• Индикатор кочнице: Светли када се кочи.
• Индикатор грешке: Displays error codes if a system fault occurs.
• Укључивање предњих светала: Indicates when the e-bike's headlights are active.

Figure 4: Bafang C965 LCD display icons and basic specifications.

7. Одржавање

To ensure the longevity and optimal performance of your C965 display:

• Чишћење: Обришите екран и кућиште меком крпомamp тканина. Немојте користити абразивна средства за чишћење или раствараче.
• Отпорност на воду: The display has an IP65 waterproof rating, meaning it is protected against dust and low-pressure water jets. Avoid submerging the unit in water.
• температура: Operate the display within its specified temperature range of -20°C to 60°C.
• Инспекција каблова: Periodically check all cables and connectors for signs of wear or damage.

КСНУМКС. Решавање проблема

If you encounter issues with your BAFANG C965 LCD Display, consider the following:

• Екран се не укључује:
  • Ensure the e-bike battery is charged and properly connected.
  • Check all cable connections between the display, control unit, and motor for looseness or damage.
  • Проверите да ли је дугме за напајање правилно притиснуто.
• Нетачна очитавања брзине/удаљености:
  • Check the speed sensor and magnet on your wheel for proper alignment and cleanliness.
  • Ensure the wheel circumference setting in the display's advanced settings (if accessible) is correct.
• Приказани кодови грешака:
  • Refer to your Bafang motor's specific error code list for detailed explanations and solutions. Common issues include motor, controller, or sensor faults.
  • Often, turning the system off and on again can clear temporary errors.
• Дугмад не реагују:
  • Check the connection of the external control button unit to the display.
  • Ensure buttons are not physically stuck.

If problems persist after attempting these steps, contact Bafang customer support or your authorized dealer for assistance.

9. Спецификације

10. Гаранција и подршка

BAFANG products are typically covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for any warranty claims.

For technical support, warranty inquiries, or spare parts, please contact your original retailer or visit the official BAFANG webсајт за контакт информације за корисничку подршку.