ANZZI Sofi Series Freestanding Whirlpool and Air Bath Tub

1. Увод

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your ANZZI Sofi Series Freestanding Whirlpool and Air Bath Tub. Please read this manual thoroughly before installation and use. Retain this manual for future reference.

2. Безбедносне информације

УПОЗОРЕЊЕ: To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times. Always supervise children and individuals with disabilities near the bathtub.

електрична безбедност:

• Ensure all electrical connections are performed by a qualified electrician in accordance with local and national electrical codes.
• The bathtub must be connected to a dedicated, grounded circuit protected by a Ground Fault Circuit Interrupter (GFCI).
• Do not operate the tub if the GFCI trips. Consult a qualified electrician.
• Never operate electrical appliances near the tub.

Температура воде:

• Water temperature in a bathtub should not exceed 104°F (40°C). Temperatures above this can cause hyperthermia.
• Pregnant women and individuals with health conditions should consult a physician before using the tub.

Опште мере предострожности:

• Do not use bath oils, salts, or other additives that may damage the tub's surface or internal components, unless specifically approved by ANZZI.
• Ensure the floor can support the weight of the filled tub and its occupant(s).
• Avoid standing or sitting on the rim of the tub.

3. Садржај пакета

Пре почетка инсталације проверите да ли су све компоненте присутне и неоштећене. Ако неки делови недостају или су оштећени, контактирајте корисничку подршку ANZZI-ја.

• Freestanding Bathtub (Sofi Series FT-AZ201)
• Pre-installed Whirlpool and Air Bath System
• Drain and Overflow Assembly (may require additional parts depending on installation)
• Упутство за употребу

4. Спецификације

For detailed dimensions, refer to the technical drawing below:

Figure 4.1: Technical drawing showing overall and interior dimensions of the FT-AZ201 bathtub.

5. Подешавање и инсталација

Installation of this freestanding bathtub, especially with whirlpool and air bath features, requires professional plumbing and electrical expertise. It is highly recommended to hire licensed professionals for installation to ensure safety and proper functionality.

5.1 Контролна листа пре инсталације

• Inspect the tub for any visible damage upon delivery. Report any damage immediately.
• Verify that the installation area meets the required dimensions and weight capacity.
• Ensure all necessary plumbing (hot and cold water supply, drain) and electrical connections (dedicated GFCI circuit) are available at the installation site.
• Confirm that the drain and overflow assembly are compatible with your plumbing setup. Note: Some installations may require additional drain parts not included with the tub.

5.2 Installation Steps (Professional Recommended)

1. Позиционирање: Carefully move the tub to its desired location. Ensure adequate clearance around the tub for maintenance and cleaning.
2. Нивелисање: Adjust the tub's feet to ensure it is perfectly level. This is crucial for proper drainage and stability.
3. Одводни прикључак: Connect the tub's drain assembly to the floor drain. Ensure all connections are watertight. Perform a leak test by filling the tub with water and checking for leaks around the drain and overflow.
4. Електрични прикључак: A qualified electrician must connect the whirlpool and air bath pump to the dedicated GFCI-protected electrical circuit. Follow all local electrical codes.
5. Завршна инспекција: After all connections are made, fill the tub and test all functions (whirlpool jets, air jets, heater, aromatherapy) to ensure proper operation and no leaks.

Слика 5.1: Завршеноview of the ANZZI Sofi Series Freestanding Bathtub.

6. Упутство за употребу

6.1 Пуњење каде

1. Ensure the drain is closed.
2. Fill the tub with water to a level that covers the highest jets. Do not overfill.

6.2 Whirlpool and Air Bath Operation

The control panel is typically located on the rim of the tub. Familiarize yourself with the buttons for each function.

Figure 6.1: Control panel and jet layout on the ANZZI Sofi Series Bathtub.

• Whirlpool Jets: Press the 'Whirlpool' button to activate the water jets. Adjust intensity if a control knob is present.
• Air Bath Jets: Press the 'Air Bath' button to activate the air bubbles from the bottom of the tub.
• Maintenance Heater: The integrated heater maintains the water temperature. It is not designed to heat cold water. Ensure the heater is on for prolonged use.
• Ароматерапија: If your model includes aromatherapy, follow the specific instructions for adding aromatherapy beads or liquids to the designated dispenser.

To turn off the functions, press the respective buttons again.

7. Одржавање

Regular cleaning and maintenance will prolong the life and performance of your bathtub.

7.1 Cleaning the Bathtub Surface

• Use a soft cloth and non-abrasive, mild liquid cleaner specifically designed for acrylic surfaces.
• Avoid abrasive cleaners, scouring pads, or harsh chemicals (e.g., acetone, paint thinner, ammonia-based cleaners) as they can damage the acrylic finish.
• Након чишћења темељно исперите чистом водом.

7.2 Cleaning the Jet System

Periodically clean the internal plumbing of the whirlpool system to prevent buildup of soap residue and bacteria.

1. Fill the tub with hot water (around 104°F / 40°C) to a level above the jets.
2. Add 2-3 tablespoons of low-foaming dishwasher detergent or a specialized jet cleaning solution.
3. Run the whirlpool jets for 10-15 minutes.
4. Испразните каду.
5. Refill the tub with clean cold water and run the jets for another 5 minutes to rinse the system.
6. Drain and wipe the tub clean.

КСНУМКС. Решавање проблема

If you encounter issues, refer to the table below. For problems not listed or if solutions do not resolve the issue, contact ANZZI customer support or a qualified professional.

9. Гаранција и подршка

For warranty information, please refer to the documentation provided with your purchase or visit the official ANZZI webсајт. Сачувајте доказ о куповини за потребе гаранције.

For technical assistance, replacement parts, or any other inquiries, please contact ANZZI customer support:

• ANZZI корисничка служба: Refer to your purchase documentation or the ANZZI webсајт за актуелне контакт податке.
• Онлине ресурси: Visit the ANZZI brand store on Amazon or their official webсајт за често постављана питања и додатне информације о производу.