myTouchSmart 48707 Rotatable Outdoor Digital Yard Stake Timer Instruction Manual

Увод

This manual provides detailed instructions for the safe and efficient operation of your myTouchSmart 48707 Rotatable Outdoor Digital Yard Stake Timer. Please read this manual thoroughly before installation and use, and retain it for future reference. This device is designed to automate outdoor lighting and other electrical appliances with programmable on/off times, light-sensing technology, and multiple grounded outlets.

Важне информације о безбедности

• Ризик од струјног удара: Use only with a GFCI-protected outdoor outlet. Do not immerse in water.
• Правилно уземљење: Ensure the timer is properly grounded.
• Заштита од преоптерећења: Do not exceed the maximum electrical rating of 125V, 60 Hz, 1875W (15A) general/resistive.
• Пласман: Place the stake in a location with direct access to sunlight for optimal light sensor function. Ensure the unit is at least 1 foot above ground level to prevent waterlogging.
• Поклопци излаза: Keep individual self-closing protective outlet covers closed when not in use to prevent moisture and debris entry.
• Управљање кабловима: Route cords to prevent tripping hazards and damage.
• Одржавање: Искључите напајање пре него што извршите било какво одржавање или чишћење.

Садржај пакета

• myTouchSmart Rotatable Outdoor Digital Yard Stake Timer (Model 48707)
• Ground Stake (multi-section)
• Упутство за употребу

Карактеристике производа

• Rotatable Outlets: Six grounded outlets, three of which rotate 180 degrees for flexible access.
• Дигитални тајмер: Programmable with custom ON/OFF times.
• Светлосни сензор: Automatic dusk-to-dawn operation or 6-hour countdown after sunset.
• Отпоран на временске услове: Durable construction with self-closing protective outlet covers.
• 10ft Cord: Provides extended reach for outdoor placement.
• Заштита од преоптерећења: Integrated 15A/1875W circuit breaker for safety.

Сетуп

1. Саставите колац: Attach the stake sections together and then to the timer unit.
2. Пласман: Insert the assembled stake firmly into the ground in your desired outdoor location. Ensure the timer unit is at least 1 foot above ground level and has direct access to sunlight if using light-sensing features.
3. Initial Power Connection: Plug the timer's power cord into a GFCI-protected outdoor outlet. If the display is blank, allow the timer to charge for at least 30 minutes to power the internal battery.
4. Ресетујте тајмер: Using a small, non-metallic, insulated tool (like a pencil tip or toothpick), press the РЕСЕТ button located on the control panel. The LCD display will illuminate and show "12:00 AM".
5. Повежите уређаје: Plug your outdoor lights or appliances into the grounded outlets. Rotate the outlets as needed for optimal cord management. Close the protective covers over unused outlets.

Упутство за употребу

1. Setting Day & Time

1. Притисните и држите ЦЛОЦК дугме.
2. Док држи ЦЛОЦК, притисните тастер НЕДЕЉА button repeatedly until the desired day of the week appears at the top of the display.
3. Наставите да држите ЦЛОЦК, и притисните ХОУР button repeatedly to set the current hour (AM/PM will adjust automatically).
4. Still holding ЦЛОЦК, притисните тастер МИН више пута притисните дугме да бисте подесили тренутни минут.
5. Отпустите ЦЛОЦК дугме да бисте сачували подешавања.

2. Setting Programs (ON/OFF Times)

The timer allows for two custom ON/OFF programs. Follow these steps for each program:

1. Притисните тастер ПРОГ button once. The display will show "1 ON" at the bottom left. This indicates you are setting the ON time for Program 1.
2. Притисните тастер НЕДЕЉА button repeatedly to select the desired day(s) for this program (e.g., MO, TU, WE, TH, FR, SA, SU, or various combinations).
3. Притисните тастер ХОУР дугме да бисте подесили жељени сат укључивања.
4. Притисните тастер МИН дугме да бисте подесили жељени минут укључивања.
5. Притисните тастер ПРОГ button again. The display will show "1 OFF". This indicates you are setting the OFF time for Program 1.
6. Repeat steps 2-4 to set the desired OFF day(s), hour, and minute for Program 1.
7. To set Program 2, press the ПРОГ button again until "2 ON" appears, then repeat steps 2-6.
8. Након подешавања свих жељених програма, притисните дугме ЦЛОЦК дугме за повратак на главни екран.

To clear a program: Док viewing the program (e.g., "1 ON" or "1 OFF"), press the R (Reset) button. Four dashes will appear, indicating the program is cleared. Press R again to reactivate it.

3. Auto/Manual Settings

To use your programmed settings, the timer must be in AUTO mode. To switch between modes:

• Притисните и држите МАНУАЛ button for 4 seconds. The display will cycle through AUTO ON, AUTO OFF, and MANUAL.
• АУТО УКЉУЧЕНО: The timer will remain ON until the next programmed OFF time.
• АУТОМАТСКО ИСКЉУЧЕНО: The timer will remain OFF until the next programmed ON time.
• ПРИРУЧНИК: The timer will ignore all programmed settings and act as a simple ON/OFF switch.

4. Light Sensor Modes (Dusk-to-Dawn, Countdown)

The timer features light-sensing technology for automatic operation based on ambient light. Ensure the light sensor (located on the top of the unit) is unobstructed and receives direct sunlight for optimal performance.

• Сумрак до зоре: The timer will automatically turn ON at dusk and remain ON until dawn.
• Тајмер: The timer will turn ON at dusk and remain ON for a preset duration (e.g., 6 hours).

Refer to the specific button on your timer labeled "Sensor" or "Timer" to cycle through these modes. The product description mentions "6-Hour Countdown" and "dawn to dusk" as presets.

5. Security/Vacation Mode (Random Function)

This mode randomly adjusts your programmed ON/OFF times to give your home a lived-in appearance, deterring potential intruders. To activate this feature, you must have at least one program set for longer than 33 minutes.

1. Притисните тастер НЕДЕЉА и ХОУР buttons simultaneously. "RND" will appear to the right of the display, indicating Random mode is active.
2. In this mode, programmed ON/OFF times will be randomly postponed by 2 to 32 minutes.
3. Да бисте деактивирали, притисните НЕДЕЉА и ХОУР buttons simultaneously again. "RND" will disappear.

6. Daylight Saving Mode

To adjust the time for Daylight Saving:

1. Притисните тастер ХОУР и МИН buttons simultaneously. The time will adjust by one hour forward or backward.
2. This function must be manually enabled or disabled as needed.

Одржавање

• Regularly inspect the timer and cord for any signs of damage, fraying, or wear.
• Keep the light sensor clean and free from debris to ensure accurate dusk/dawn detection.
• Ensure all unused outlets have their protective covers securely closed.
• Очистите јединицу меком, дamp тканина. Немојте користити јаке хемикалије или абразивна средства за чишћење.

Решавање проблема

Спецификације

Гаранција и подршка

For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the myTouchSmart official webсајт. Сачувајте рачун као доказ о куповини.