Увод
This manual provides essential information for the safe installation, operation, and maintenance of your Amazon Basics 40W Waterproof LED Outdoor Motion Sensor Security Light. Please read these instructions thoroughly before installation and retain them for future reference.
Безбедносне информације
- УПОЗОРЕЊЕ: Опасност од струјног удара. Искључите напајање преко осигурача или прекидача пре инсталације или сервисирања.
- Овај производ мора бити инсталиран у складу са важећим кодексом за инсталацију од стране особе упознате са конструкцијом и радом производа и опасностима које су укључене.
- Ground the fixture properly to avoid potential electrical shock and to ensure reliable operation.
- Do not connect to a dimmer switch.
- Не гледајте директно у ЛЕД извор светлости.
- Уверите се да су сви прикључци сигурни и правилно изоловани.
- Радни температурни опсег: -20°C до 40°C (-4°F до 104°F).
Садржај пакета
- Amazon Basics 40W LED Outdoor Motion Sensor Security Light (1 unit)
- Прибор за монтажу (шрафови, навртке за жицу)
- Упутство за употребу
Карактеристике производа
The Amazon Basics 40W LED Outdoor Motion Sensor Security Light is designed for reliable outdoor illumination with energy efficiency and adjustable features.
- Висока осветљеност: 2 ultra-bright LED light heads produce up to 4000 lumens at 5000K daylight color temperature.
- Детекција покрета: Integrated motion sensor with up to 180° detection angle and a range of up to 49 feet.
- Подесиви дизајн: LED heads are flexibly adjustable 350° horizontally and 60° vertically. The motion sensor is adjustable 180° horizontally and 90° vertically.
- Издржљива конструкција: Aluminum design for effective heat dissipation and a bulb lifespan of up to 50,000 hours.
- Отпоран на временске услове: Waterproof rating ensures resilience against rain, sleet, or snow.
- ЕТЛ сертификат: Meets safety and quality standards.
Слика: Фронт view of the Amazon Basics 40W LED Outdoor Motion Sensor Security Light, highlighting its two adjustable light heads and motion sensor.
Сетуп
Follow these steps for proper installation of your security light. Professional installation is recommended if you are unfamiliar with electrical wiring.
- Припремите се за инсталацију:
- Turn off power at the circuit breaker or fuse box before beginning installation.
- Уверите се да је површина за монтажу стабилна и да може да издржи тежину уређаја.
- Монтирајте уређај:
- Причврстите држач за монтажу на разводну кутију користећи приложене завртње.
- Connect the electrical wires: black to black (live), white to white (neutral), and green/bare copper to ground. Secure connections with wire nuts.
- Carefully push the wires into the junction box and secure the fixture to the mounting bracket.
- Подесите главе светла и сензор:
- Loosen the adjustment screws on the light heads and motion sensor.
- Position the light heads to cover the desired illumination area.
- Angle the motion sensor to optimize detection coverage, typically pointing slightly downwards.
- Tighten all adjustment screws securely.
- Врати снагу: Поново укључите напајање на прекидачу.
Image: The security light installed on the exterior wall of a building, illuminating the area below.
Упутство за употребу
The motion sensor has adjustable settings to customize its operation.
- Подешавање времена: This dial controls how long the light remains on after motion is detected. Adjust from 5 seconds to 12 minutes.
- LUX (Daylight) Setting: This dial determines the ambient light level at which the motion sensor becomes active.
- Turn towards the "Sun" symbol for activation during both day and night.
- Turn towards the "Moon" symbol for activation only during nighttime or low-light conditions.
- Почетно укључивање: Upon first power-up, the light may stay on for a short period (e.g., 5 minutes) as it calibrates. After this initial period, it will operate according to your chosen settings.
Одржавање
- Чишћење: Очистите уређај меком, дamp крпа. Не користите абразивна средства за чишћење или раствараче. Уверите се да је напајање искључено пре чишћења.
- инспекција: Periodically check for loose wiring or damaged components. Replace any damaged parts immediately.
- ЛЕД: The integrated LED bulbs are designed for long life and are not user-replaceable.
Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Светлост се не пали. | No power; faulty wiring; LUX setting too high (daylight). | Check circuit breaker; verify wiring connections; adjust LUX setting towards "Moon" symbol. |
| Светло остаје укључено непрекидно. | Motion sensor continuously triggered; TIME setting too long; LUX setting too low (always active). | Adjust sensor angle to avoid constant triggers; reduce TIME setting; adjust LUX setting towards "Sun" symbol. |
| Светло трепери или пригушује. | Loose wiring connection; power fluctuations. | Check and secure all wiring connections; consult an electrician if power fluctuations persist. |
| Motion sensor range is poor. | Sensor obstructed; incorrect angle; environmental factors (temperature). | Clear obstructions; adjust sensor angle; consider environmental conditions. |
Спецификације
| Број модела | SM-4000-180-2H |
| Бранд | Амазон Басицс |
| Ватtage | 40В |
| Осветљеност | 4000 лумена |
| Температура боје | 5000К Даилигхт |
| Угао детекције | До 180° |
| Домет детекције | До 49 стопа |
| Волtage | 120 Волтс |
| Материјал | Алуминијум, Пластика |
| Ниво отпорности на воду | Водоотпоран |
| Цертификати | ЕТЛ Цертифиед |
| Димензије артикла (Д к Ш к В) | 14.96 cm x 6.3 cm x 5.12 cm |
| Тежина артикла | 1.9 фунти |
Гаранција и подршка
For warranty information or technical support, please refer to the Amazon Basics product page or contact Amazon customer service. Keep your purchase receipt for warranty claims.