MOUNTUP Monitor Mount Instruction Manual

1. Увод

Thank you for choosing the MOUNTUP Single Computer Monitor Stand. This full motion gas spring desk monitor arm is designed to enhance your workspace ergonomics by providing flexible positioning for your monitor. It is compatible with most flat and curved computer monitors from 17 to 32 inches, supporting a maximum weight of 17.6 lbs. This manual will guide you through the installation, operation, and maintenance of your new monitor mount.

2. Безбедносне информације

Please read and understand all instructions before installation and use. Failure to do so may result in personal injury or property damage. If you have any questions, please contact MOUNTUP customer support.

• Не прекорачујте максималну носивост од 8 кг (17.6 фунти).
• Ensure the desk surface is stable and strong enough to support the combined weight of the mount and monitor.
• Always keep the arm in a horizontal position during gas spring tension adjustment to prevent injury or damage.
• Use all provided hardware and follow the installation steps precisely.
• Држите децу и кућне љубимце подаље током инсталације.

3. Листа паковања

Пре почетка инсталације проверите да ли су све компоненте присутне и неоштећене.

Figure 3.1: Key features and compatibility of the MOUNTUP monitor mount.

Пакет треба да садржи:

• Monitor Arm Assembly (Upper and Lower Arms)
• Столски стуб
• Ц-Цлamp База
• Компоненте основе ушнице
• ВЕСА плоча
• All necessary screws, washers, and Allen keys
• Упутство за употребу

4. Подешавање и инсталација

Choose between C-Clamp or Grommet mounting based on your desk type and preference.

Figure 4.1: The monitor mount offers both C-Clamp и опције за монтажу ушица.

4.1 Ц-Цлamp Инсталација

1. Причврстите Ц-цлamp base to the desk pole using the provided screws and Allen key.
2. Position the assembled clamp and pole on the edge of your desk.
3. Затегните Ц-цлamp Заврните завртањ док носач не буде чврсто причвршћен за сто. Уверите се да је стабилан и да се не клима.

4.2 Grommet Installation

1. Disassemble the C-clamp by removing the screw and plate.
2. Insert the desk pole through the grommet hole in your desk.
3. Secure the pole from underneath the desk using the grommet base plate and tightening knob.

4.3 Attaching VESA Plate to Monitor

1. Пажљиво поставите монитор лицем надоле на меку, чисту површину.
2. Align the VESA plate with the mounting holes on the back of your monitor (75x75mm or 100x100mm).
3. Secure the VESA plate to the monitor using the appropriate screws. Do not overtighten.

4.4 Attaching Monitor to Arm

1. Поставите VESA плочу са причвршћеним монитором на монтажну главу држача монитора.
2. Ensure the monitor is fully seated and then tighten the security bolt to prevent accidental detachment.

4.5 Управљање кабловима

Route your monitor cables through the integrated cable management clips on the arm and pole to maintain a tidy workspace.

Figure 4.2: Effective cable management keeps your desk organized.

4.6 Видео водич за инсталацију

Video 4.1: A detailed installation guide for the MOUNTUP Single Monitor Mount (MU0025).

5. Руковање и подешавања

The MOUNTUP monitor arm offers full motion capabilities for optimal viewин удобност.

Figure 5.1: The monitor arm provides extensive adjustability for ergonomic positioning.

5.1 Подешавање затегнутости гасне опруге

Adjust the gas spring tension to match your monitor's weight for smooth and stable positioning. Keep the arm in a horizontal position during adjustment.

Figure 5.2: Adjusting the gas spring tension for optimal monitor support.

• If the arm shoots up: Turn the adjustment screw clockwise ("-" direction) to reduce tension for a lighter monitor.
• If the arm falls down: Turn the adjustment screw counter-clockwise ("+" direction) to increase tension for a heavier monitor.

5.2 Подешавање нагиба

The monitor can tilt +90° (up) and -45° (down) to reduce glare and optimize viewинг углова.

• Loosen the tilting bolt on the VESA plate.
• Position the screen to your desired angle.
• Retighten the tilting bolt to fix the angle.

5.3 Swivel and Rotation

The arm allows for extensive swivel and 360° rotation for landscape or portrait orientation.

Figure 5.3: Achieve perfect viewing angles with 360-degree rotation.

• Lower Arm Swivel: ±135°
• Upper Arm Swivel: ±180°
• Screen Swivel: ±90°
• Screen Rotation: 360°

5.4 Adjustment Video Guide

Video 5.1: Guide to Gas Spring Tension & Tilting Adjustment for MOUNTUP Monitor Mount (MU0025).

Video 5.2: Demonstration of the MOUNTUP Single Monitor Desk Mount (MU0025) functions.

6. Одржавање

Редовно одржавање осигурава дуготрајност и оптималне перформансе вашег носача монитора.

• Чишћење: Обришите носач меком крпомamp крпом. Избегавајте абразивна средства за чишћење или раствараче који могу оштетити завршну обраду.
• инспекција: Periodically check all screws and connections to ensure they are tight and secure. Retighten if necessary.
• Гасна опруга: If the gas spring tension feels off, refer to Section 5.1 for adjustment instructions.

КСНУМКС. Решавање проблема

Ако наиђете на било какве проблеме, погледајте следеће уобичајене проблеме и решења:

• Monitor arm falls down or shoots up: This indicates incorrect gas spring tension. Refer to Section 5.1 for proper adjustment based on your monitor's weight.
• Monitor tilts forward or backward unexpectedly: The tilting bolt may be loose. Refer to Section 5.2 to loosen, adjust, and retighten the tilting bolt.
• Mount feels unstable or wobbly: Уверите се да је C-clamp or grommet base is securely tightened to the desk. Check all connection points on the arm and VESA plate.
• Difficulty moving the arm: The tension might be too high for a lighter monitor, or the joints might need lubrication (though typically not required for gas spring arms). Ensure no cables are snagged.

Ако проблеми и даље постоје, обратите се корисничкој подршци.

8. Спецификације

9. Гаранција и подршка

All MOUNTUP monitor mounts are backed by 3-year support. Our friendly customer support team is available to answer any questions within 12 hours. For assistance, please visit the official MOUNTUP website or contact us directly through your purchase platform.