1. Увод
This manual provides essential information for the safe and efficient use of your DENON PMA-2000IIR Integrated Amplifier. Please read this manual thoroughly before operating the unit and keep it for future reference. The PMA-2000IIR is designed to deliver high-fidelity audio performance, building upon the acclaimed PMA-2000 series with enhanced sound quality and robust construction.
2. Безбедносна упутства
To prevent electric shock, fire, and damage to the unit, observe the following safety precautions:
- Не излажите овај уређај киши или влази.
- Do not remove the cover. Refer servicing to qualified personnel.
- Обезбедите одговарајућу вентилацију; не блокирајте вентилационе отворе.
- Connect the unit to an AC 100V, 50/60Hz power supply only.
- Не постављајте предмете напуњене течношћу, као што су вазе, на јединицу.
- Unplug the unit from the wall outlet if it will be unused for long periods.
3. Производ је готовview
The DENON PMA-2000IIR is an integrated amplifier engineered for superior audio reproduction. Key features include:
- UHC-MOS High-Current Ampослобођење: Излаз сtage utilizes UHC-MOS (Ultra High Current MOS) elements, providing a peak current supply capability of 120A, significantly higher than conventional designs, for powerful and dynamic sound.
- Advanced Power Supply: Features a newly developed power transformer with high-current, ultra-high-speed rectifier diodes. The core lamination thickness is approximately 20% greater, and the winding cross-sectional area is about 40% larger compared to the PMA-2000, reducing operating resistance.
- Precision Mechanical Ground Construction: This design minimizes interference from internal vibrations. Radiators, damped by elastic rubber and stabilizers, are directly attached to the bottom near newly developed high-damping feet, isolating the power transformer and other vibration sources.
- Precision Signal Ground Circuit: Suppresses noise signal inflow from constant current circuits and filters out currents other than the intended signal, ensuring signal purity.
- Twin-Monaural & 6-Block Structure: To prevent sound degradation from mutual circuit interference and noise, the power amplifier blocks are configured independently for left and right channels (twin-monaural). The unit also employs a 6-block structure, separating circuits with different signal levels.
- High-Quality Phono Equalizer: The phono equalizer section features a discrete first-stage circuit utilizing low-noise FETs for optimal vinyl playback.
- Премиум компоненте: Incorporates selected high-quality parts, including power radiators with improved heat dissipation (20% thicker base with black anodizing), a dedicated transformer for control systems, OFC (Oxygen-Free Copper) internal wiring, inert gas-sealed relays, and high-quality carbon resistors/capacitors.
- Bi-wiring Speaker Terminals: Equipped with large, brass-machined speaker terminals compatible with bi-wiring configurations, along with an AC inlet type power cord.
- Pre-out Terminals: Provides pre-out terminals for system expansion.
Слика 1: Предња страна view of the DENON PMA-2000IIR Integrated Ampспасилац. Ова слика приказује amplifier's front panel, including its gold finish, control knobs, and input selectors.
4. Подешавање
4.1 Распакивање и постављање
- Пажљиво уклоните ampизвадите га из амбалаже.
- Place the unit on a stable, level surface with adequate ventilation. Avoid placing it near heat sources or in direct sunlight.
- Ensure there is sufficient space around the unit for proper heat dissipation.
4.2 Повезивање звучника
- Connect your speakers to the SPEAKER A or SPEAKER B terminals on the rear panel. Ensure correct polarity (+ to + and - to -).
- For bi-wiring, connect compatible speakers to both A and B terminals, ensuring the bi-wiring load impedance is within 4-16Ω.
- Тхе amplifier supports speaker loads of 4-16Ω for A or B, and 8-16Ω for A+B.
4.3 Повезивање аудио извора
- Connect your audio sources (CD player, turntable, etc.) to the appropriate input terminals (e.g., CD, TUNER, PHONO) on the rear panel using RCA cables.
- For turntables, connect to the PHONO MM or PHONO MC input depending on your cartridge type.
4.4 Прикључак за напајање
- Connect the supplied power cord to the AC INLET on the rear panel and then to a wall outlet (AC 100V, 50/60Hz).
- The unit also provides switched (max 120W total) and unswitched (max 240W) power outlets for other audio components.
5. Упутство за употребу
5.1 Укључивање/искључивање
- Press the POWER button on the front panel to turn the unit on or off.
5.2 Избор улаза
- Use the INPUT SELECTOR knob or buttons on the front panel to choose your desired audio source (e.g., CD, PHONO, TUNER).
5.3 Контрола јачине звука
- Adjust the VOLUME knob to set the desired listening level. Start with a low volume and gradually increase it.
5.4 Тоне Цонтрол
- Use the BASS and TREBLE knobs to adjust the low and high frequencies to your preference.
- Bass: ±8dB at 100Hz.
- Treble: ±8dB at 10kHz.
5.5 Source Direct Function
- Engage the Source Direct function to bypass tone controls and other processing circuits for the purest audio signal path.
6. Одржавање
6.1 Чишћење
- Обришите уређај меком, сувом крпом. Не користите абразивна средства за чишћење, воскове или раствараче.
- Уверите се да је јединица искључена пре чишћења.
6.2 Вентилација
- Regularly check that the ventilation openings are not obstructed by dust or other materials.
КСНУМКС. Решавање проблема
Ако имате проблема са својим ampспасилац, погледајте следеће уобичајене проблеме и решења:
| Проблем | Могући узрок | Решење |
|---|---|---|
| Нема струје | Кабл за напајање није повезан; Прекидач за напајање је искључен | Check power cord connection; Press the POWER button |
| Нема звука | Incorrect input selected; Speaker cables disconnected; Volume too low | Select correct input; Check speaker connections; Increase volume |
| Изобличен звук | Input signal too high; Speaker impedance mismatch; Damaged cables | Reduce source volume; Verify speaker impedance; Check/replace cables |
| Зујање | Ground loop; Nearby electrical interference | Ensure proper grounding; Move unit away from other electronics |
If the problem persists after trying these solutions, please contact DENON customer support.
8. Спецификације
The following are the technical specifications for the DENON PMA-2000IIR Integrated Ampдизалица:
| Феатуре | Спецификација |
|---|---|
| Тип | Интегрисано Ampлифиер |
| Rated Output (8Ω, 20Hz-20kHz, T.H.D. 0.07%) | КСНУМКСВ + КСНУМКСВ |
| Practical Max Output (4Ω, 1kHz, T.H.D. 0.7%) | КСНУМКСВ + КСНУМКСВ |
| Total Harmonic Distortion (8Ω, 1kHz) | 0.01% (at rated output -3dB) |
| Излазни прикључци звучника | A or B: 4-16Ω load; A+B: 8-16Ω load; Bi-wiring: 4-16Ω load |
| Phono MM Input Sensitivity/Impedance | 2.5mV / 47kΩ |
| Phono MC Input Sensitivity/Impedance | 0.2mV / 100Ω |
| Line Input Sensitivity/Impedance | 140mV / 70kΩ (Source Direct Off); 140mV / 30kΩ (Source Direct On) |
| RIAA Deviation (PHONO) | 20Хз-20кХз ± 0.5дБ |
| Pre-out Output | 1V (CD line input, at 100mV input signal) |
| Фреквенцијски одзив (укупно) | 5Hz-100kHz (0 to -3dB) |
| SN Ratio (Phono MM, 5mV input) | 91дБ |
| SN Ratio (Phono MC, 0.5mV input) | 76дБ |
| SN Ratio (Line) | 110дБ |
| Контрола тона баса | ±8дБ (100Хз) |
| Контрола тона високих тонова | ±8дБ (10кХз) |
| Повер Суппли | АЦ 100В, 50/60Хз |
| Потрошња енергије | 250В |
| Спољне димензије (Ш к В к Д) | 434 к 180 к 478 мм |
| Тежина | 22.0 кг |
Напомена: Спецификације се могу променити без најаве.
9. Гаранција и подршка
For warranty information, please refer to the warranty card included with your product or visit the official DENON website. If you require technical assistance or have questions not covered in this manual, please contact DENON customer support. Please have your model number (PMA-2000IIR) and purchase details ready when contacting support.
Official DENON Webсајт: ввв.денон.цом