WORKPRO 20V Cordless Angle Grinder User Manual

1. Увод

Thank you for choosing the WORKPRO 20V Cordless Angle Grinder. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before first use and keep it for future reference.

This powerful and versatile tool is designed for various tasks including grinding, derusting, cutting, and polishing, offering cordless convenience and high performance.

2. Безбедносна упутства

Увек се придржавајте основних мера безбедности када користите електричне алате како бисте смањили ризик од пожара, струјног удара и телесних повреда.

Општа безбедносна упозорења за електрични алат:

• Безбедност на радном месту: Радно место одржавајте чистим и добро осветљеним. Не користите електричне алате у експлозивним атмосферама, као што је присуство запаљивих течности, гасова или прашине.
• електрична безбедност: Избегавајте контакт тела са уземљеним површинама. Не излажите електричне алате киши или влажним условима.
• Лична безбедност: Stay alert, watch what you are doing and use common sense. Always wear eye protection and hearing protection. Use appropriate personal protective equipment (PPE) such as dust mask, non-skid safety shoes, hard hat, or hearing protection for appropriate conditions.
• Употреба и одржавање електричног алата: Не форсирајте електрични алат. Користите одговарајући електрични алат за вашу примену. Искључите батерију из електричног алата пре него што извршите било каква подешавања, промените додатну опрему или складиштите електрични алат.
• Употреба и одржавање акумулаторског алата: Пуните само пуњачем који је навео произвођач. Користите електричне алате само са посебно намењеним батеријама.

Посебна безбедносна упозорења за угаону брусилицу:

• Овај електрични алат је намењен да функционише као брусилица, брусилица, жичана четка или алат за сечење. Прочитајте сва безбедносна упозорења, упутства, илустрације и спецификације које сте добили уз овај електрични алат.
• Не користите прибор који није посебно дизајниран и препоручен од стране произвођача алата.
• Уверите се да је додатна опрема правилно монтирана и затегнута пре употребе.
• Always use the correct protective guard for the type of work being performed (grinding or cutting).
• Do not operate the tool without the guard properly installed.
• Maintain a firm grip on the power tool with both hands.
• Keep hands away from the rotating accessory.
• Будите свесни повратног удара, што је изненадна реакција на заглављену или заглављену ротирајућу плочу.
• Do not apply excessive pressure during cutting, as this can activate the protection and stop the machine. If this occurs, turn off the switch and restart immediately.

3. Садржај пакета

Carefully unpack all items and ensure you have received all components listed below. If any items are missing or damaged, please contact WORKPRO customer service.

• 1 x WORKPRO Cordless Angle Grinder
• 1 x 20V 4.0 Ah Lithium-ion Battery
• 1 x Брзи пуњач
• 5 x Cutting Discs (Ø125mm)
• 2 x Protective Guards (for cutting and grinding)
• 1 x Multi-position Auxiliary Handle
• 1 к кључ

Image 3.1: The WORKPRO 20V Cordless Angle Grinder along with its complete set of accessories, including the battery, charger, cutting discs, protective guards, auxiliary handle, and wrench.

4. Производ је готовview

Familiarize yourself with the different parts of your WORKPRO Angle Grinder before operation.

Image 4.1: Detailed diagram showing the key components of the angle grinder, including the rubber auxiliary handle, safety lock, spindle lock, metal safety wheel guard for grinding, battery, LED indicator, and the quick-change guard mechanism.

1. Rubber Auxiliary Handle: Пружа додатни хват и контролу.
2. Сигурносна брава: Спречава случајно покретање.
3. Закључавање вретена: Користи се за закључавање вретена ради лакше измене диска.
4. Metal Safety Wheel Guard (for Grinding): Protects the user during grinding operations.
5. батерија: 20V 4.0Ah Lithium-ion battery for cordless operation.
6. ЛЕД индикатор: Приказује ниво напуњености батерије.
7. Change The Guard Without Tool: Quick-release mechanism for changing protective guards.
8. Metal Safety Wheel Guard (for Cutting): Protects the user during cutting operations.
9. Cut-Off Wheels: Discs for cutting various materials.
10. пуњач: Fast charger for the 20V battery.
11. Кључ: Wrench for securing and removing discs.

5. Подешавање

5.1 Пуњење батерије

• Insert the 20V 4.0Ah Lithium-ion battery into the fast charger.
• Plug the charger into a standard electrical outlet (Type C - Two round pins, French type).
• The LED indicator on the battery will show the charging status. Ensure the battery is fully charged before first use.

5.2 Причвршћивање помоћне ручке

• The auxiliary handle can be attached in multiple positions (left, right, or top) for optimal comfort and control.
• Screw the rubber auxiliary handle firmly into the desired threaded hole on the grinder head.

Image 5.1: Illustration of the 3-position anti-vibration and non-slip rubber handle, demonstrating its adjustability for user comfort and control.

5.3 Installing/Changing Discs and Protective Guards

• Always ensure the battery is removed before changing discs or guards.
• Притисните и држите дугме за закључавање вретена да бисте спречили окретање вретена.
• Use the provided wrench to loosen the flange nut and remove the old disc (if any).
• Поставите жељени диск за сечење или брушење на вретено, водећи рачуна да буде центриран.
• Replace the flange nut and tighten it securely with the wrench while holding the spindle lock.
• Select the appropriate protective guard for your task (cutting or grinding). The guards feature a quick-change mechanism.
• Attach the guard by aligning it with the grinder head and snapping it into place. Ensure it is securely fastened and does not tilt.

Image 5.2: The angle grinder shown with the included 5 metal/stainless cut-off wheels and 2 quick-change protective guards, one for cut-off wheels and one for flap discs.

6. Упутство за употребу

6.1 Укључивање/искључивање

• Уметните напуњену батерију у отвор за батерију док не кликне на своје место.
• To start the grinder, locate the switch in the middle-top position. Push the switch to the right, then push it upwards. This two-step operation is a safety feature to prevent accidental startup.
• To turn off the grinder, simply release the switch.

Слика 6.1: Крупни план view of the angle grinder's middle switch, highlighting the two-step operation (1. push right, 2. push up) for enhanced safety and the cruise speed function.

6.2 Технике брушења и сечења

• Hold the grinder firmly with both hands, using the auxiliary handle for stability.
• Allow the disc to reach full speed (7500 rpm) before contacting the workpiece.
• For grinding, apply light, even pressure and move the grinder smoothly across the surface.
• For cutting, make shallow passes, gradually increasing the depth. Do not force the tool.
• If the machine stops due to excessive pressure, immediately turn off the switch, remove the pressure, and restart the machine.
• Always direct sparks away from yourself and others, and away from flammable materials.

Image 6.2: A collage demonstrating the angle grinder in action for different applications, including grinding metal, cutting pipes, and surface preparation, with sparks visible during operation.

7. Одржавање

7.1 Чишћење

• After each use, disconnect the battery and clean the tool with a soft, dry cloth.
• Уклоните прашину или остатке из вентилационих отвора како бисте спречили прегревање.
• Не користите воду или хемијска средства за чишћење.

7.2 Одржавање батерије

• Чувајте батерију на хладном и сувом месту даље од директне сунчеве светлости и екстремних температура.
• Do not store the battery in a discharged state for extended periods. Recharge it periodically if not in use.
• Не излажите батерију води или ватри.

7.3 Замена диска

• Replace discs when they become worn, damaged, or lose their effectiveness.
• Always use discs with the correct diameter (Ø125mm) and bore size for this grinder.
• Follow the instructions in Section 5.3 for safe disc replacement.

КСНУМКС. Решавање проблема

This section addresses common issues you might encounter with your WORKPRO Angle Grinder.

9. Спецификације

Detailed technical specifications for the WORKPRO 20V Cordless Angle Grinder.

Image 9.1: The angle grinder placed on a scale, illustrating its lightweight design at only 1.75 kg without the battery, which helps reduce user fatigue during prolonged work.

10. Гаранција и подршка

The WORKPRO 20V Cordless Angle Grinder comes with a Двогодишња гаранција произвођача од дана куповине.

This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, neglect, unauthorized repairs, or normal wear and tear.

For warranty claims, technical support, or inquiries about spare parts, please contact WORKPRO customer service through your original point of purchase or visit the official WORKPRO webсајту.

Молимо вас да сачувате доказ о куповини ради потврде гаранције.