femometer DMT-2032
Femometer Digital Thermometer DMT-2032 User Manual
Модел: ДМТ-2032
1. Увод
This manual provides detailed instructions for the safe and effective use of your Femometer Digital Thermometer, model DMT-2032. This device is designed for accurate temperature measurement for adults and children via oral, rectal, or underarm methods. Please read this manual thoroughly before first use and keep it for future reference.

Image 1: Femometer Digital Thermometer DMT-2032 with its retail packaging.
2. Карактеристике производа
- Прецизно мерење: Utilizes an advanced sensory probe for precise temperature detection.
- Разноврсна употреба: Suitable for oral, rectal, and underarm temperature measurement for all ages.
- ЛЦД екран: Clear digital display for easy reading.
- Сећање: Stores the last measured temperature reading.
- Fever Alert: Provides an audible beep when measurement is complete, and may indicate fever.
- C/F Switchable: Лако пребацујте између јединица Целзијуса (°C) и Фаренхајта (°F).
- Упозорење о ниској батерији: Показује када је потребно заменити батерију.
- Аутоматско искључивање: Automatically shuts down to conserve battery life.
- Waterproof Tip: Allows for simple and hygienic cleaning.
- Protective Storage Case: Included for convenient storage and portability.

Слика 2: Готовоview of the thermometer's key features.
3. Подешавање
3.1. Инсталација батерије
The Femometer Digital Thermometer comes with one LR41 battery pre-installed. If the battery needs replacement, follow these steps:
- Gently slide off the battery cover located at the end of the thermometer.
- Remove the old LR41 battery.
- Уметните нову LR41 батерију са позитивном (+) страном окренутом нагоре.
- Вратите поклопац батерије безбедно.
3.2. Прво укључивање
Press the power button to turn on the thermometer. A short beep will sound, and the display will show all segments briefly, followed by the last measured temperature. Then, 'Lo' with a flashing '°C' or '°F' will appear, indicating the thermometer is ready for measurement.
4. Упутство за употребу
4.1. Мерење
- Уверите се да је термометар чист и дезинфикован.
- Притисните дугме за напајање да бисте укључили уређај.
- Position the thermometer according to the desired measurement method (oral, rectal, or underarm).
- Hold the thermometer in place until a series of beeps indicates the measurement is complete. For accurate readings, continue holding for approximately 60 seconds after the initial beep.
- Прочитајте температуру приказану на ЛЦД екрану.
- Притисните дугме за напајање да бисте искључили термометар, или ће се он аутоматски искључити након приближно 10 минута неактивности.

Image 3: The thermometer can be used for oral, rectal, and underarm temperature measurement.
4.2. Measurement Methods
- Орална употреба: Place the tip of the thermometer under the tongue. Close your mouth and hold the thermometer in place.
- Ректална употреба: Lubricate the tip with a water-soluble jelly. Gently insert the tip into the rectum (approximately 0.5 inches for infants). This method is generally recommended for infants and young children.
- Употреба испод пазуха: Place the tip of the thermometer in the armpit, ensuring good skin contact. Hold the arm firmly against the body. This method may provide less accurate readings than oral or rectal methods.

Image 4: Oral temperature measurement.

Image 5: Rectal temperature measurement.

Image 6: Underarm temperature measurement.
4.3. Промена јединица температуре (°C/°F)
To switch between Celsius and Fahrenheit, ensure the thermometer is off. Press and hold the power button for approximately 3-5 seconds until the unit changes on the display.

Image 7: Switching between Celsius and Fahrenheit.
5. Одржавање
5.1. Чишћење и дезинфекција
The thermometer tip is waterproof and can be cleaned easily. After each use, wipe the tip with a soft cloth moistened with rubbing alcohol (70% isopropyl alcohol) or an antiseptic solution. Do not immerse the entire thermometer in water or any cleaning solution.

Image 8: The waterproof tip allows for easy cleaning.
5.2. Замена батерије
When the low battery indicator (a flashing battery icon) appears on the display, it is time to replace the LR41 battery. Refer to section 3.1 for battery installation instructions.

Image 9: Low battery alarm indication.
5.3. Складиштење
Store the thermometer in its protective case in a cool, dry place, away from direct sunlight and extreme temperatures.
КСНУМКС. Решавање проблема
If you encounter any issues with your thermometer, please refer to the table below for common problems and their solutions.
| Порука о грешци | Проблем | Решење |
|---|---|---|
| Lo | Измерена температура је нижа од 90.0°Ф (32.0°Ц). | Turn off, wait one minute, and take a new temperature via close contact and sufficient rest. |
| Hi | Temperature taken is higher than 109.9°F (42.9°C). | Turn off, wait one minute, and take a new temperature via close contact and sufficient rest. |
| Ерр | Систем не функционише како треба. | Unload the battery, wait for 1 minute, and repower it. If the message reappears, contact the retailer for service. |
| Battery Icon Flashing | Dead battery; battery icon is flashing, cannot be measured. | Замените батерију. |

Image 10: Troubleshooting guide for common display messages.
7. Спецификације
| Број модела | ДМТ-2032 |
| Димензије производа | 5.9 к 2.1 к 0.8 инча |
| Тежина | 1.13 унци |
| Извор напајања | 1 x LR41 battery (included) |
| Дисплаи Типе | Дигитални ЛЦД |
| Прецизност мерења | ±0.1°Ц / 0.2°Ф |
| Посебне карактеристике | High Accuracy, Fever Alert, Memory Recall, C/F Switchable, Waterproof Tip, Auto Off |
| Спољашњи материјал | Пластика |
| Нега производа | Обрисати |
| Произвођач | ЈОИТЕЦХ Хеалтхцаре Цо., Лтд. |
8. Гаранција и подршка
Femometer is committed to providing reliable products and customer satisfaction.
- Lifetime Unlimited Warranty: Your Femometer Digital Thermometer is backed by a lifetime warranty.
- Корисничка подршка: Dedicated 24/7 customer support is available to assist you with any questions or concerns.
- Сертификати: This product is FDA/MDL/CE certified, ensuring quality and safety standards.

Image 11: Reliable brand information including certifications and support.