HYPERLITE HYPERLITE Will Series

HYPERLITE 2 LED светла за високе рампе 220W - упутство за употребу

Model: HYPERLITE Will Series

1. Увод

This manual provides detailed instructions for the installation, operation, and maintenance of your HYPERLITE 2 Pack LED High Bay Lights. These 220W, 4FT linear LED lights are designed for high-efficiency illumination in environments such as warehouses, factories, and workshops. They feature 28,600 lumens of brightness, AC 120-277V input, and 1-10V dimmable functionality. Please read this manual thoroughly before installation and use to ensure safe and optimal performance.

Two HYPERLITE 220W LED High Bay Lights hanging from chains
Image 1.1: Two HYPERLITE 220W LED High Bay Lights. These linear fixtures are shown suspended by chains, illustrating their typical installation method in a commercial or industrial setting.

2. Безбедносне информације

Увек се придржавајте следећих мера предострожности како бисте смањили ризик од пожара, струјног удара или повреде:

  • Disconnect power before installation, maintenance, or cleaning.
  • Инсталацију треба да изврши квалификовани електричар у складу са националним и локалним електричним прописима.
  • Уверите се да је залиха волtage is compatible with the fixture's requirements (AC 120-277V).
  • Do not operate the fixture with a damaged cord or if it has been dropped or damaged in any way.
  • Avoid direct eye exposure to the light source when the fixture is powered on.
  • Do not modify the fixture or use it for purposes other than its intended use.

3. Садржај пакета

Проверите да ли су све компоненте присутне у пакету:

  • 2 x 220W Linear High Bay Lights
  • Хангинг Цхаин
  • V-Shaped Hook
  • Упутство за употребу (овај документ)

4. Спецификације

ФеатуреСпецификација
БрандХИПЕРЛИТЕ
Број моделаHYPERLITE Will Series
Ватtage220В
Осветљеност28,600 лумена
Ефикасност130 лумена по вату
ВолtageАЦ 120-277В
Температура боје5000 Келвина (дневно светло)
Затамњивање1-10В Диммабле
МатеријалАлуминијум
Димензије производа47.2 cm D x 13.6 cm Š x 2.2 cm V
Тежина артикла11 фунти
Врста инсталацијеSemi Flush Mount (Hanging)
ЦертификатиUL/DLC Approved
Унутрашња/спољна употребаИндоор
Diagram showing key specifications of the HYPERLITE LED High Bay Light
Image 4.1: Key specifications of the HYPERLITE LED High Bay Light, including 28,600 lumens, 120° beam angle, 5000K color temperature, and UL & DLC certifications.
Close-up of the LED chips in the HYPERLITE High Bay Light
Слика 4.2: Крупни план view of the 130LM/W bright chips used in the HYPERLITE linear high bay light, highlighting the unique anti-glare design.
Close-up of the aluminum housing and fin design for heat dissipation
Image 4.3: Detail of the selected aviation aluminum housing with a fin design, engineered to maximize heat dissipation and prolong the service life of the LED fixture.

5. Подешавање и инсталација

The HYPERLITE linear high bay lights are designed for a 3-step easy installation using the provided V-shaped hook and strong chain. Ensure power is disconnected before beginning installation.

  1. Fix the Chain: Securely attach the hanging chain to a suitable structural support in your desired installation location. Ensure the support can safely bear the weight of the fixture.
  2. Attach V-Shaped Hook: Securely attach the V-shaped hook to the lamp body. The joint between the V-shaped hook and the lamp is manufactured to prevent breakage.
  3. Connect Chain to Hook: Connect the hanging chain to the V-shaped hook on the fixture. Use the integrated gradient (level indicator) to ensure a balanced installation.

Напомена: Embedded or pipe mounting accessories are not included and must be acquired separately if desired. Ensure all electrical connections are made by a qualified professional.

Close-up of the V-shaped hook and balance knob on the HYPERLITE High Bay Light
Image 5.1: Detail of the V-shaped hook and the 'Magic Balance' knob. This knob helps ensure the fixture is perfectly balanced during installation, indicated by the level bubble.
Collage of various installation environments for HYPERLITE High Bay Lights
Слика 5.2: Примерamples of HYPERLITE High Bay Lights installed in different settings, including a large empty warehouse, a garage with a car lift, and a smaller workshop, demonstrating their versatility.

6. Упутство за употребу

The HYPERLITE LED High Bay Lights are designed for straightforward operation once installed.

6.1 Укључивање/искључивање

Once wired to a power source, the lights will turn on when power is supplied to the circuit. Use a standard wall switch or circuit breaker to control the power to the fixtures.

6.2 1-10V Dimming Function

These fixtures support 1-10V dimming. To utilize this feature, connect the fixture to a compatible 1-10V dimmer switch (not included). The dimmer allows you to adjust the light output to suit different lighting needs and preferences. Follow the dimmer manufacturer's instructions for wiring and operation.

6.3 Опциона додатна опрема

The lights are compatible with optional accessories such as emergency power units and motion sensors (not included). These accessories provide additional functionality:

  • Emergency Power Compatible: Ensures lighting during power outagес.
  • Motion Sensor Compatible: Provides automatic switching based on motion, potentially saving energy.

Refer to the specific accessory's instruction manual for installation and operation details.

7. Одржавање

Regular maintenance ensures the longevity and optimal performance of your HYPERLITE LED High Bay Lights.

  • Чишћење: Искључите струју пре чишћења. Користите меку, суву или благо длаку.amp крпу за брисање спољашњости уређаја. Не користите абразивна средства за чишћење, раствараче или јаке хемикалије, јер могу оштетити завршну обраду или електричне компоненте.
  • инспекција: Periodically inspect the hanging chains, hooks, and electrical connections for any signs of wear, damage, or loosening. Address any issues promptly.
  • ЛЕД: The LED chips are designed for long life and do not require replacement under normal operating conditions.

КСНУМКС. Решавање проблема

If you encounter issues with your HYPERLITE LED High Bay Lights, refer to the following common troubleshooting steps:

ПроблемМогући узрокРешење
Светло се не палиНема напајања
Слаба веза ожичења
Faulty switch/dimmer		Проверите прекидач и извор напајања.
Проверите да ли су сви спојеви ожичења безбедни (уверите се да је напајање искључено).
Test the switch or dimmer for functionality.
Светло неочекивано трепери или се затамниНекомпатибилан димер
Лабаво ожичење
Волtagе флуктуације		Уверите се да је димер компатибилан са 1-10V.
Проверите везе ожичења.
Консултујте електричара да бисте проверили стабилност напајања.
Смањена осветљеностПоставка димера је прениска
Накупљање прашине на уређају		Подесите димер на максимално подешавање.
Clean the fixture surface (ensure power is off).
Fixture is hot to the touchNormal operation (LEDs generate heat)
Лоша вентилација
Преоптерећење		Some heat is normal. Ensure adequate airflow around the fixture.
Verify fixture is not enclosed or obstructed. If excessively hot, disconnect power and consult an electrician.

If the problem persists after attempting these solutions, please contact HYPERLITE customer service.

9. Гаранција и подршка

HYPERLITE stands behind the quality and reliability of its products.

9.1 Информације о гаранцији

Your HYPERLITE Linear High Bay Lights come with a 5 година гаранцијеОва гаранција покрива недостатке у материјалу и изради при нормалној употреби. Молимо вас да сачувате доказ о куповини за потребе подношења захтева за гаранцију.

9.2 Служба за кориснике

For technical assistance, warranty claims, or any other inquiries, please contact our dedicated customer service team. Our team is committed to providing exceptional after-sales service.

For more information or to contact support, please visit the official HYPERLITE store or webсајту.

HYPERLITE Store: Visit HYPERLITE Store on Amazon

© 2025 HYPERLITE. All rights reserved.