iBeam Micro Camera Black Fixed Angle User Manual

1. Увод

This manual provides detailed instructions for the installation, operation, and maintenance of your iBeam Micro Camera Black Fixed Angle (Model TE-MICM). This camera is designed to enhance vehicle safety by providing clear visual assistance. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Безбедносне информације

• Увек искључите акумулатор возила пре почетка било какве електричне инсталације.
• Уверите се да су све ожичење правилно изоловане и осигуране како бисте спречили кратки спојеви или оштећења.
• Не ометајте возачу view or interfere with vehicle controls during installation.
• Консултујте професионалног инсталатера ако нисте сигурни у вези са било којим делом процеса инсталације.
• This product is intended as an aid and should not replace safe driving practices.

3. Садржај пакета

Проверите да ли су све ставке присутне у пакету:

• iBeam Micro Camera Black Fixed Angle (TE-MICM)
• Mounting Hardware (8MM threaded bolt, nuts, washers)
• Електрична инсталација
• Упутство за употребу (овај документ)

Image: The retail packaging for the iBeam Micro Camera, showing the camera and its model number on the box.

4. Производ је готовview

The iBeam Micro Camera (TE-MICM) is a compact, fixed-angle camera designed for various vehicle applications, including backup assistance. It features a durable, water-resistant design and provides a clear image for enhanced visibility.

Слика: Крупни план view of the iBeam Micro Camera, highlighting its compact black housing and the camera lens.

Кључне карактеристике:

• Компактан дизајн: Мали простор за дискретну инсталацију.
• Отпоран на воду: IP68 rated for reliable performance in various weather conditions.
• Сензор слике: 1/4 CMOS image sensor for clear video output.
• Switchable Image: Mirror/Normal image option for versatile mounting (e.g., rear view или фронт view).
• Монтажа: Features an 8MM threaded bolt for secure mounting.

5. Подешавање и инсталација

Follow these steps for proper installation of your iBeam Micro Camera:

1. Изаберите локацију за монтажу: Select a location that provides an unobstructed view and allows for secure mounting. Common locations include above the license plate, on the bumper, or integrated into a vehicle panel. Consider the 18.7mm height of the camera housing for clearance.
2. Припремите монтажну површину: If drilling is required, ensure no existing wiring or components will be damaged. Drill a hole appropriate for the 8MM threaded bolt.
3. Монтирајте камеру: Insert the 8MM threaded bolt through the prepared hole and secure the camera using the provided nuts and washers. Ensure the camera is oriented correctly for the desired view.
4. Ожичење:
   • Connect the camera's power wire (typically red) to a 12V power source that is activated when the camera is needed (e.g., reverse light circuit for a backup camera, or ignition-switched power for a front camera).
   • Connect the camera's ground wire (typically black) to a clean chassis ground point.
   • Connect the video output cable from the camera to the video input of your display monitor or head unit.
5. Тест функционалност: Before reassembling vehicle panels, test the camera's operation. Turn on the vehicle and engage the appropriate gear (e.g., reverse) to activate the camera. Verify that the image appears clearly on your display.
6. Сигурно ожичење: Route all cables safely away from moving parts, heat sources, and sharp edges. Use zip ties or electrical tape to secure wiring.

Image: Illustration showing two common mounting options for the iBeam Micro Camera: a flush mount and a lip mount using the threaded bolt.

6. Упутство за употребу

Once installed, the iBeam Micro Camera operates automatically when power is supplied to it and the connected display is active.

• Backup Camera Use: If connected to the reverse light circuit, the camera image will automatically appear on your display when the vehicle is shifted into reverse.
• Front/Side Camera Use: If connected to an ignition-switched power source or a manual switch, the camera can be activated as needed.
• Оријентација слике: The camera supports switchable mirror/normal image output. Refer to your installer or the camera's wiring diagram for instructions on how to change this setting, typically by cutting a specific wire loop.

7. Одржавање

The iBeam Micro Camera is designed for low maintenance. Follow these guidelines to ensure longevity:

• Чишћење: Периодично чистите сочиво камере меком крпомamp крпом да бисте уклонили прљавштину, прашину или мрље од воде које могу да блокирају view. Do not use abrasive cleaners.
• инспекција: Regularly check the camera's mounting and wiring connections to ensure they remain secure and free from damage.
• Избегавајте прање под високим притиском: While water-resistant, avoid directing high-pressure water sprays directly at the camera lens or housing, as this could potentially compromise the seal.

КСНУМКС. Решавање проблема

If you experience issues with your iBeam Micro Camera, refer to the following common problems and solutions:

9. Спецификације

10. Гаранција и подршка

For warranty information and technical support, please contact iBeam customer service or visit the official iBeam webсајт. Сачувајте рачун као доказ о куповини за евентуалне рекламације по гаранцији.

Произвођач: Метра Електроникс Корп