Јахитек YA-00097090

Yaheetech Adjustable Squat Rack and Barbell Stand

Model: YA-00097090 - Instruction Manual

1. Увод

Thank you for choosing the Yaheetech Adjustable Squat Rack and Barbell Stand. This manual provides essential information for the safe assembly, proper use, and maintenance of your new fitness equipment. Please read this manual thoroughly before assembly and use, and retain it for future reference.

This squat rack is designed to support various strength training exercises, including squats, bench presses (when used with a separate bench), and overhead presses. Its adjustable features allow for customization to suit different user heights and exercise requirements.

2. Безбедносне информације

УПОЗОРЕЊЕ: Непоштовање ових безбедносних упутстава може довести до озбиљних повреда или смрти.

  • Консултујте се са лекаром пре него што започнете било који програм вежбања.
  • Always inspect the equipment for loose parts, damage, or wear before each use. Do not use if damaged.
  • Ensure all bolts, nuts, and adjustment pins are securely tightened before use.
  • Place the squat rack on a flat, stable, non-slip surface.
  • Не прекорачујте максималну дозвољену тежину од 250 кг (551 фунте).
  • Always use safety spotter arms when performing exercises, especially heavy lifts.
  • Држите децу и кућне љубимце подаље од опреме током употребе.
  • Носите одговарајућу спортску одећу и обућу.
  • Perform exercises with controlled movements. Avoid sudden or jerky motions.
  • Ако осетите бол, вртоглавицу или кратак дах, одмах престаните са вежбањем.

3. Садржај пакета

Молимо вас да проверите да ли су све компоненте присутне и неоштећене пре почетка монтаже. Ако неки делови недостају или су оштећени, обратите се корисничкој служби.

Експлодирао view of Yaheetech squat rack components

Слика 3.1: Експлодирао view of components and hardware.

  • Main Upright Posts (2)
  • Base Supports (2)
  • J-Hooks / Barbell Holders (2 pairs)
  • Safety Spotter Arms (2)
  • Adjustment Knobs/Pins (various)
  • Assembly Hardware (bolts, washers, nuts, end caps)
  • Упутство за употребу (овај документ)

4. Упутство за монтажу

Assembly requires basic tools (not included), such as an adjustable wrench and pliers. It is recommended to assemble the unit with two people for ease and safety.

  1. Step 1: Attach Base Supports to Upright Posts. Securely fasten each upright post to its corresponding base support using the provided bolts, washers, and nuts. Ensure the base is stable and level.
  2. Step 2: Install J-Hooks. Slide the J-hooks onto the top section of each upright post. Ensure they are inserted correctly and are facing the appropriate direction for holding a barbell.
  3. Step 3: Install Safety Spotter Arms. Insert the safety spotter arms into the lower adjustment holes on each upright post. Secure them with the adjustment pins. These arms should be positioned at a height that provides safety during your lifts.
  4. Корак 4: Завршно затезање. Double-check all bolts and nuts to ensure they are fully tightened. The unit should feel stable and not wobble.
Assembled Yaheetech squat rack in a room

Figure 4.1: Fully assembled squat rack.

5. Рад и употреба

The Yaheetech Squat Rack is versatile for various exercises. Always ensure proper form and use appropriate weight.

5.1. Squats

  • Adjust the J-hooks to a height slightly below your shoulders when standing.
  • Set the safety spotter arms to a height that will catch the barbell if you fail a lift, typically just below your lowest squat position.
  • Load the barbell evenly with weights.
  • Approach the bar, position it on your upper back/shoulders, unrack, and step back.
  • Perform squats with controlled movement.
  • Re-rack the barbell securely after your set.

5.2. Bench Press (with separate bench)

  • Place a weight bench between the two upright posts.
  • Adjust the J-hooks to a height that allows you to unrack the barbell comfortably from a lying position.
  • Adjust the safety spotter arms to a height that will prevent the barbell from crushing you if you fail a lift, typically just above your chest at the bottom of the press.
  • Load the barbell evenly with weights.
  • Lie on the bench, position yourself under the bar, unrack, and perform bench presses.
  • Re-rack the barbell securely after your set.
Yaheetech squat rack used with a weight bench for bench press

Figure 5.1: Squat rack in use with a weight bench.

6. Подешавања

The squat rack offers flexible adjustments for height and safety arm positions.

6.1. Height Adjustment for J-Hooks

  • The upright posts feature 14 adjustable height levels, with each increment being 5 cm (approximately 2 inches).
  • To adjust, remove the adjustment pin from the J-hook.
  • Slide the J-hook to the desired height, aligning it with the appropriate hole.
  • Re-insert the adjustment pin and ensure it passes completely through the post and J-hook for secure locking.
  • Always ensure both J-hooks are set to the same height.
Close-up of the height adjustment mechanism on the squat rack

Figure 6.1: Detail of the 14-level height adjustment.

6.2. Adjustment for Safety Spotter Arms

  • The safety spotter arms can be adjusted to 6 levels, ranging from 49 cm to 74 cm (approximately 19.3 to 29.1 inches) from the ground.
  • To adjust, remove the adjustment pin from the safety arm.
  • Slide the safety arm to the desired height, aligning it with the appropriate hole.
  • Re-insert the adjustment pin and ensure it passes completely through the post and safety arm for secure locking.
  • Always ensure both safety spotter arms are set to the same height.
Close-up of the safety spotter arm adjustment mechanism

Figure 6.2: Detail of the safety spotter arm.

7. Одржавање

Regular maintenance ensures the longevity and safe operation of your squat rack.

  • Дневно: Обришите опрему огласомamp крпом након сваке употребе за уклањање зноја и прашине.
  • Недељно: Inspect all bolts, nuts, and adjustment pins for tightness. Re-tighten any loose fasteners.
  • месечно: Check for any signs of rust, cracks, or structural damage. If any damage is found, discontinue use immediately and contact customer service.
  • Складиштење: Store the equipment in a dry, cool place away from direct sunlight and moisture.

КСНУМКС. Решавање проблема

ПроблемМогући узрокРешење
Rack wobbles or feels unstable.Лабави вијци или неравна површина.Уверите се да су сви вијци за склапање потпуно затегнути. Померите сталак на равну, хоризонталну површину.
Adjustment pin does not secure.Pin not fully inserted or misaligned.Ensure the J-hook/safety arm is correctly aligned with the hole. Push the pin completely through both sides.
Тешкоће у подешавању висине.Friction or slight misalignment.Apply a small amount of silicone lubricant to the sliding surfaces if needed. Ensure no weight is on the J-hooks during adjustment.

9. Спецификације

  • Бренд: Иахеетецх
  • Број модела: ИА-00097090
  • Боја: Црно
  • Материјал: Метал
  • Product Dimensions (each stand): 54.5 cm (L) x 50.5 cm (W) x 102.5-167.5 cm (H) (Adjustable)
  • Тежина производа: 18.5 kg (total for pair)
  • Максимални капацитет тежине: 250 кг (551 лбс)
  • J-Hook Height Adjustment: 14 levels (102.5 cm to 167.5 cm, 5 cm increments)
  • Safety Spotter Arm Adjustment: 6 levels (49 cm to 74 cm)
Diagram showing dimensions of the Yaheetech squat rack

Слика 9.1: Димензије производа.

10. Гаранција и подршка

For warranty information, technical support, or to order replacement parts, please contact Yaheetech customer service through your original purchase platform or visit the official Yaheetech webсајту.

Please have your model number (YA-00097090) and purchase date available when contacting support.

© 2023 Јахитек. Сва права задржана.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.