Bellman & Symfon Smoke Alarm Transmitter

1. Увод

This manual provides essential information for the proper installation, operation, and maintenance of your Bellman & Symfon Smoke Alarm Transmitter (Model BE1284-433). This device is designed to integrate with the Bellman Visit Smart Home System, providing early fire detection and transmitting alerts to compatible Visit receivers, particularly beneficial for individuals who are deaf or hard of hearing.

Молимо вас да пажљиво прочитате ово упутство пре употребе производа како бисте осигурали безбедан и ефикасан рад.

2. Безбедносне информације

• Важно: This smoke alarm transmitter is a component of the Bellman Visit Smart Home System and requires a compatible Bellman Visit receiver (sold separately) to provide alerts. It does not function as a standalone audible smoke alarm.
• Do not paint the smoke alarm. Paint can clog the openings and interfere with the sensor's ability to detect smoke.
• Do not install in areas with high humidity, extreme temperatures, or excessive dust.
• Test the smoke alarm regularly as described in the "Operation" section.
• Replace batteries promptly when indicated.
• Keep out of reach of children unless supervised.

3. Садржај пакета

Проверите да ли су све ставке присутне у пакету:

• Bellman & Symfon Smoke Alarm Transmitter (BE1284-433)
• Носач
• Вијци и утикачи за зид
• Кориснички приручник (овај документ)
• Battery (pre-installed or separate, check packaging)

Image: The Bellman & Symfon Smoke Alarm Transmitter shown with its retail packaging.

4. Производ је готовview

4.1 Компоненте

The Bellman & Symfon Smoke Alarm Transmitter consists of the following main parts:

• Сензор дима: Detects smoke particles.
• Test & Silence Button: Used for testing the alarm and temporarily silencing nuisance alarms.
• ЛЕД индикатори: Provide visual feedback on status (e.g., power, alarm, fault).
• Одељак за батерије: Houses the power source.
• Монтажна плоча: For secure installation on a ceiling or wall.

Image: The smoke alarm transmitter installed on a ceiling, showing its compact design.

4.2 Карактеристике

• Wireless transmission to Bellman Visit receivers.
• Long battery life (up to 10 years).
• Integrated Test & Silence button.
• "Toast Mode" for temporary sensitivity reduction in cooking areas.
• Designed for individuals who are deaf or hard of hearing, seniors, and assisted living environments.

5. Подешавање

5.1 Избор локације

Install the smoke alarm transmitter on the ceiling in the center of a room or hallway. If ceiling mounting is not possible, it can be mounted on a wall, ensuring the top edge is between 4 to 12 inches (10 to 30 cm) from the ceiling.

Avoid installing in:

• Kitchens or bathrooms (due to steam and cooking fumes).
• Near ventilation openings, windows, or doors.
• Areas with extreme temperatures (below 4°C / 39°F or above 38°C / 100°F).

5.2 Инсталација

1. Prepare the Mounting Plate: Detach the mounting plate from the smoke alarm by twisting it counter-clockwise.
2. Означите избушене рупе: Hold the mounting plate against the chosen ceiling or wall location and mark the positions for the drill holes.
3. Drill and Mount: Drill holes, insert wall plugs (if necessary), and secure the mounting plate with the provided screws.
4. Прикључите предајник: Align the smoke alarm transmitter with the mounting plate and twist it clockwise until it clicks securely into place.

Image: Dimensions of the smoke alarm transmitter: Height 4.7" (120 mm), Width 4.7" (120 mm), Depth 1.8" (46 mm), Weight 0.41 lb (185 g) including battery.

5.3 Pairing with a Visit Receiver

To receive alerts, the smoke alarm transmitter must be paired with a Bellman Visit receiver (e.g., Flash Receiver, Alarm Clock Receiver, Pager Receiver, Portable Receiver). Refer to your Visit receiver's manual for specific pairing instructions. Generally, the process involves:

1. Put your Visit receiver into pairing mode.
2. Press and hold the Test & Silence button on the smoke alarm transmitter until the LED indicator flashes, indicating it's sending a pairing signal.
3. Confirm successful pairing on your Visit receiver.

Image: An illustration showing various Bellman Visit transmitters (including the smoke alarm) and receivers placed throughout a home, demonstrating system integration.

6. Операција

6.1 Почетни тест

After installation and pairing, perform an initial test:

• Притисните и држите Test & Silence дугме на неколико секунди.
• The smoke alarm will emit a test signal, and your paired Visit receiver should activate (e.g., flash lights, vibrate).
• If the receiver does not respond, re-check pairing and ensure the transmitter is within range.

6.2 Нормалан рад

The smoke alarm transmitter continuously monitors for smoke. Upon detection, it will:

• Activate its internal alarm (if equipped, though primarily designed for transmission).
• Transmit an alarm signal to all paired Bellman Visit receivers within range.

Image: The smoke alarm transmitter detecting smoke, indicated by a red LED and smoke visually rising.

6.3 Silence Function (Toast Mode)

The "Toast Mode" allows for temporary reduction of sensitivity to prevent nuisance alarms from cooking fumes. To activate:

• When a nuisance alarm occurs (e.g., from cooking), press the Test & Silence дугме.
• The alarm will be silenced for approximately 10 minutes, and the sensitivity will be reduced.
• After 10 minutes, the alarm will automatically return to normal sensitivity.

Image: A kitchen setting with the smoke alarm installed, illustrating the use of "Toast Mode" to reduce sensitivity during cooking.

7. Одржавање

7.1 Редовно тестирање

Test the smoke alarm transmitter weekly by pressing the Test & Silence button. Ensure your paired Visit receiver responds correctly.

7.2 Чишћење

Clean the exterior of the smoke alarm transmitter at least once a month using a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Do not open the unit for cleaning.

7.3 Замена батерије

The smoke alarm transmitter is designed for long battery life (up to 10 years). When the battery is low, the unit will typically indicate this with a specific LED flash pattern or a signal to the Visit receiver. Replace the battery immediately when indicated. Refer to the product's internal markings for the correct battery type (usually a non-rechargeable lithium battery).

1. Twist the smoke alarm counter-clockwise to remove it from its mounting plate.
2. Отворите одељак за батерије.
3. Уклоните стару батерију и одложите је у складу са локалним прописима.
4. Insert the new battery, ensuring correct polarity.
5. Close the battery compartment and reattach the smoke alarm to its mounting plate.
6. Perform a test as described in Section 6.1.

КСНУМКС. Решавање проблема

9. Спецификације

10. Гаранција и подршка

10.1 30-Day Money Back Guarantee

Bellman & Symfon offers a risk-free refund for all products within 30 days of purchase. If you are not satisfied with your product, please contact customer support for assistance.

10.2 Корисничка подршка

For any questions, technical assistance, or support regarding your Bellman & Symfon product, please contact us:

• Бесплатно: (833) BELLMAN / (833) 235 5626
• Емаил: support.bsn@bellman.com