КИНГ К901-Б Хут Ви-Фи линија ВолtagУпутство за употребу паметног програмабилног термостата

Увод

This manual provides detailed instructions for the installation, operation, and maintenance of your KING K901-B Hoot WiFi Line Voltage Smart Programmable Thermostat. This device is designed to provide precise temperature control for electric heating systems, including baseboard, fan-forced, and radiant electric heaters, with the added convenience of WiFi connectivity for remote management.

Молимо вас да пажљиво прочитате ово упутство пре инсталације и употребе како бисте осигурали правилно функционисање и безбедност.

Безбедносне информације

• Installation must be performed by a qualified electrician in accordance with local and national electrical codes.
• Always turn off power at the circuit breaker before installing or servicing the thermostat.
• This thermostat is designed for line voltage electric heating systems (120V/208V/240V, Single Pole, 3-Wire). Do not use with low voltage systems (e.g., furnaces, central air conditioners).
• Ensure all wiring connections are secure to prevent electrical hazards.
• Не излажите термостат води или прекомерној влази.

Садржај пакета

• KING K901-B Hoot WiFi Thermostat
• Монтажни завртњи
• Жичане матице
• Кориснички приручник (овај документ)

Инсталација

Потребни алати:

• Одвијач (Пхиллипс и Флатхеад)
• Скидачи жице
• Волtagе Тестер

Wiring Instructions (Single Pole, 3-Wire):

1. Искључите напајање: Locate the circuit breaker controlling your heating system and turn it OFF. Verify power is off using a voltagе тестер.
2. Уклоните стари термостат: Carefully remove your existing thermostat from the wall. Disconnect the wires, noting their connections.
3. Идентификујте жице: For a single pole, 3-wire installation, you will typically have two line wires (L1, L2 from the power source) and one load wire (to the heater). Consult your existing thermostat's wiring or a qualified electrician if unsure.
4. Connect New Thermostat:
   • Connect the two line wires (L1, L2) from the power source to the thermostat's designated line terminals.
   • Connect the load wire to the thermostat's designated load terminal.
   • Уверите се да су сви спојеви безбедни помоћу жичаних навртки.
5. Монтирајте термостат: Secure the thermostat to the wall using the provided mounting screws.
6. Врати снагу: Поново укључите напајање на прекидачу.

Напомена: Incorrect wiring can damage the thermostat or heating system and pose a fire hazard. If you are not comfortable with electrical wiring, please consult a licensed electrician.

Image: The KING K901-B Hoot WiFi Thermostat display, showing the current temperature and set point, alongside the Hoot logo and icons for downloading the app from the App Store and Google Play.

Setup: Hoot Smart Phone App & WiFi Connection

The Hoot thermostat connects to your home WiFi network (2.4GHz only) to enable remote control and programming via the Hoot smartphone app.

1. Преузмите апликацију: Тражи "Hoot Smart Comfort Control" in the Apple App Store or Google Play Store and install it on your smartphone.
2. Креирајте налог: Open the Hoot app and follow the on-screen instructions to create a new user account or log in if you already have one.
3. Додај уређај: У апликацији изаберите опцију за додавање новог уређаја.
4. Режим упаривања термостата: On the thermostat, follow the instructions to put it into WiFi pairing mode. This usually involves holding a specific button or navigating through a menu. The thermostat display will indicate when it's ready to connect.
5. Повежите се на ВиФи: In the Hoot app, select your 2.4GHz home WiFi network and enter the password. The app will guide you through the connection process.
6. Потврда: Once connected, the thermostat display will show a WiFi icon, and the app will confirm successful pairing.

Важно: The Hoot thermostat only supports 2.4GHz WiFi networks. If you have a dual-band router, ensure your phone is connected to the 2.4GHz band during the setup process.

Упутство за употребу

Manual Operation (Touchscreen):

• Подешавање температуре: Користите горе (^) и доле (v) arrows on the touchscreen to increase or decrease the set temperature.
• Укључивање/искључивање: Притисните дугме за напајање (⏻) to turn the heating system on or off.
• Избор режима: The thermostat may offer different modes (e.g., Heat, Off). Refer to the on-screen icons for selection.
• Замена распореда: Manually adjusting the temperature will temporarily override any active schedule. The override duration can often be set or will revert at the next scheduled event.

App Operation (Hoot Smart Comfort Control):

• Даљинска контрола температуре: Adjust the temperature from anywhere using the Hoot app on your smartphone.
• Распоред програма:
  • Create custom heating schedules with up to 4 or 6 time periods per day for maximum flexibility.
  • Set different schedules for weekdays and weekends, or customize each day individually.
• Функција задржавања: Use the "Hold" feature to maintain a specific temperature indefinitely, overriding the schedule until manually released.
• Режим одмора: Set a specific temperature for an extended period when you are away, saving energy.
• User Defined Max Temperature Lock: Set a maximum temperature limit to prevent overheating or unauthorized adjustments.

Одржавање

• Чишћење: Gently wipe the thermostat screen and body with a soft, damp тканина. Немојте користити абразивна средства за чишћење или раствараче.
• Ажурирања фирмвера: The thermostat supports Over-The-Air (OTA) firmware upgrades. The Hoot app will notify you if an update is available. Follow the app's instructions to ensure your thermostat has the latest features and improvements.
• Батерија (ако је применљиво): Ова линија волtage thermostat does not typically require batteries for operation, as it draws power directly from the heating circuit.

Решавање проблема

• Thermostat Not Powering On:
  • Проверите прекидач и уверите се да је УКЉУЧЕН.
  • Проверите да ли су сви прикључци ожичења безбедни и исправни.
• Нема излаз топлоте:
  • Ensure the thermostat is set to a temperature higher than the current room temperature.
  • Check if the thermostat is in "Off" mode or "Vacation" mode.
  • Verify the heating system itself is functioning correctly.
• Проблеми са ВиФи везом:
  • Confirm your router is broadcasting a 2.4GHz network.
  • Ensure your smartphone is connected to the 2.4GHz network during setup.
  • Move the thermostat closer to the WiFi router if possible, or consider a WiFi extender.
  • Restart your router and the thermostat (by cycling power at the breaker).
  • Re-attempt the WiFi pairing process through the Hoot app.
• Нетачна очитавања температуре:
  • Уверите се да термостат није изложен директној сунчевој светлости, промаји или изворима топлоте (нпр.ampуређаји) који би могли утицати на његов сензор.
  • The thermostat uses an electronic thermistor for accurate control (±1°F).
• Екран осетљив на додир не реагује:
  • Try cycling power to the thermostat at the circuit breaker to reset it.

Спецификације

Гаранција и подршка

For warranty information and technical support, please refer to the official KING website or contact KING customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

Произвођач: Кинг Електрик

Webсајт: ввв.кинг-елецтриц.цом (Прampлинк, стварни линк може да варира)