Altec Lansing Super Lifejacket Jolt Bluetooth Speaker

1. Увод

Thank you for choosing the Altec Lansing Super Lifejacket Jolt Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker. Please read it thoroughly before use.

Image 1: Altec Lansing Super Lifejacket Jolt Bluetooth Speaker. This image shows the front view of the speaker, highlighting its rugged design and speaker grilles.

Шта је у кутији:

• Altec Lansing Super Lifejacket Jolt Speaker
• Кабл за пуњење наизменичном струјом

2. Карактеристике производа

• Customizable Lights: Features 5 different LED light modes that can illuminate in a solid color, flash, or sync to the beat of your music.
• Право бежично упаривање: Allows pairing with another compatible speaker for ampлифиед соунд.
• Интегрисано пуњење: Includes a Qi wireless charging pad and built-in dual USB charging ports for external devices.
• Продужено трајање батерије: Provides up to 30 hours of battery life.
• Све доказ: IP68 rated for waterproof, snowproof, and shockproof protection, and designed to float in water.

3. Контроле и индикатори

Familiarize yourself with the buttons and controls located on the top panel of your Super Lifejacket Jolt speaker.

• Дугме за укључивање (⏻): Press and hold for 3-5 seconds to turn the speaker on or off.
• Link Button (🔗): Used to connect your speaker to Bluetooth and to enable House Party pairing mode.
• Lighting Button (✱): Controls the lighting effects on your speaker. Cycle through multicolor slow fade, beat-to-music, solid color, slow fade, and off.
• Minus Button (-): Decreases music volume. Can also be used to go back to the previous song.
• Plus Button (+): Increases music volume. Allows you to jump to the next song.
• Microphone Button (🎤): Answers calls and accesses voice assistant features.
• Qi Charging Pad: Located on the top center, allows for wireless charging of Qi-enabled devices.

4. Подешавање

4.1 Пуњење звучника

Before initial use, fully charge your Super Lifejacket Jolt speaker. A full charge typically takes 5 to 6 hours.

1. Open the protective flap on the side of the speaker to reveal the charging port.
2. Plug one end of the included AC charging cable into the DC IN port on the speaker.
3. Укључите други крај кабла за пуњење у извор напајања.
4. The power button LED will illuminate red while charging. It will turn off when fully charged.

Image 2: Speaker with charger. This image displays the speaker alongside its AC charging adapter, illustrating the charging setup.

4.2 Укључивање/искључивање

To power on your speaker, press and hold the Power Button (⏻) located on the top of the speaker for 3 to 5 seconds. You will hear an audible prompt indicating it's powering on. To power off, repeat the same action.

4.3 Блуетоотх упаривање

After powering on, the LED light on the Link Button (🔗) will begin flashing blue, indicating it's ready for pairing.

1. Омогућите Блутут на свом уређају (паметном телефону, таблету итд.).
2. Тражи доступним Блуетоотх уређајима.
3. Select "Super Lifejacket Jolt" from the list.
4. Once paired, the Link Button LED will stop flashing and remain solid blue.

5. Упутство за употребу

5.1 Qi Wireless Charging

The speaker features a Qi wireless charging pad to charge compatible devices. Ensure your speaker is powered on to use this feature.

1. Place your Qi-enabled device directly onto the Qi charging pad on top of the speaker.
2. Ваш уређај би требало да покаже да се пуни бежично.

Image 3: Speaker at a picnic. This image shows the speaker in an outdoor setting, with a smartphone placed on its Qi charging pad.

5.2 Customizable LED Lights

Притисните дугме за осветљење (✱) to cycle through the 5 available LED light modes:

• Multicolor Slow Fade
• Beat-to-Music
• Чврста боја
• Споро бледе
• Офф

5.3 House Party Pairing

For an enhanced audio experience, you can pair two Super Lifejacket Jolt speakers together using House Party pairing mode. Refer to the Altec Lansing website for detailed instructions on enabling this feature.

6. Одржавање

The Super Lifejacket Jolt is designed for durability and outdoor use with an IP68 rating, making it waterproof, snowproof, and shockproof. It also floats in water.

Image 4: Speaker floating in water. This image demonstrates the speaker's ability to float, highlighting its waterproof design.

Чишћење:

Да бисте очистили звучник, користите меку,amp cloth. Avoid using harsh chemicals or abrasive cleaners, as these may damage the finish or protective seals. Ensure all port covers are securely closed before exposing the speaker to water.

Складиштење:

Чувајте звучник на хладном и сувом месту, даље од директне сунчеве светлости и екстремних температура када се не користи дуже време.

КСНУМКС. Решавање проблема

If you encounter issues with your speaker, try the following steps:

• Нема напајања: Ensure the speaker is fully charged. Connect it to a power source using the provided AC adapter.
• Не могу да упарим Bluetooth: Make sure the speaker is in pairing mode (flashing blue LED on Link Button). Turn off and on your device's Bluetooth, then try pairing again. Ensure no other devices are currently connected to the speaker.
• Нема звука: Check the volume levels on both the speaker and your connected device. Ensure the speaker is successfully paired via Bluetooth.
• Qi Charging Not Working: Confirm your device is Qi-enabled and properly aligned on the charging pad. Ensure the speaker is powered on.

For further assistance, please visit the Altec Lansing support webсајту.

8. Спецификације

9. Гаранција и подршка

Информације о гаранцији:

Овај производ долази са а 1-годишња пуна гаранција from the manufacturer, Altec Lansing. Please retain your proof of purchase for warranty claims.

Корисничка подршка:

For additional support, troubleshooting tips, or to register your product, please visit the official Altec Lansing webсајт: ввв.алтецлансинг.цом