Marmitek Bell ME WHT

Marmitek Bell ME WHT Wireless Chime User Manual

Model: Bell ME WHT

Производ је завршенview

The Marmitek Bell ME WHT is a wireless chime designed to extend the audible notification of your Marmitek Buzz LO video doorbell. This battery-operated unit offers flexible placement throughout your home, ensuring you never miss a visitor, whether you are in the garden, attic, or another room. It connects wirelessly via RF to the Buzz LO and can be paired with multiple Buzz LO units or have multiple Bell ME chimes connected to a single Buzz LO.

Фронт view of the Marmitek Bell ME WHT wireless chime, white square device with a speaker grille and two small indicator lights.

Слика 1: Фронт view of the Marmitek Bell ME WHT wireless chime. This white, square device features a central speaker grille and two small indicator lights on the left side, displaying its compact and minimalist design.

Садржај пакета

Уверите се да су сви елементи присутни пре него што наставите са инсталацијом.

  • 1 x Marmitek Bell ME WHT Wireless Chime
  • Кориснички приручник (овај документ)

Напомена: 3 x AA batteries are required for operation and are not included in the package.

Подешавање и инсталација

  1. Уметните батерије:

    Locate the battery compartment on the back of the Bell ME WHT. Insert 3 x AA batteries, ensuring correct polarity (+/-). Close the battery compartment cover securely.

    Сиде view of the Marmitek Bell ME WHT showing a small port and smooth white casing.

    Слика 2: Сиде view of the Bell ME WHT, illustrating its compact profile and the location of a small port, possibly for power or configuration, though primarily battery-operated.

  2. Pairing with Buzz LO Video Doorbell:

    The Bell ME WHT must be paired with a Marmitek Buzz LO video doorbell to function. Follow these steps:

    • Ensure your Buzz LO video doorbell is powered on and operational.
    • On the Bell ME WHT, locate the pairing button. This is typically a small button often indicated by a gear icon or similar symbol.
    • Press and hold the pairing button on the Bell ME WHT for a few seconds until an indicator light flashes, signifying it is in pairing mode.
    • Within a short timeframe (usually 10-30 seconds), press the doorbell button on your Buzz LO video doorbell.
    • The Bell ME WHT should chime or its indicator light should change to a solid state, confirming successful pairing.

    Напомена: You can pair multiple Bell ME chimes to a single Buzz LO, or a single Bell ME chime to multiple Buzz LO doorbells. Repeat the pairing process for each additional unit.

    Сиде view of the Marmitek Bell ME WHT showing three circular buttons on the side, likely for volume or chime selection.

    Слика 3: Сиде view of the Bell ME WHT, highlighting three circular buttons. These buttons are typically used for adjusting volume levels or selecting different chime melodies.

  3. Пласман:

    Due to its battery operation, the Bell ME WHT can be placed anywhere within the wireless range of your Buzz LO doorbell. Consider placing it in areas where the doorbell sound might not be easily heard, such as the garden, attic, basement, or a separate office/practice room.

Упутство за употребу

  • Функција звона: Once successfully paired, the Bell ME WHT will sound a chime whenever the Buzz LO video doorbell button is pressed.
  • Подешавање јачине звука: Use the buttons on the side of the Bell ME WHT (refer to Figure 3) to adjust the volume of the chime. Typically, there are dedicated buttons for increasinг и декретasinг запремине.
  • Избор мелодије: The Bell ME WHT may offer multiple chime melodies. Use the designated button (often one of the side buttons) to cycle through available melodies.

Одржавање

  • Замена батерије: When the chime sound becomes weak or the indicator light signals low battery, replace the 3 x AA batteries. Always use fresh, high-quality batteries for optimal performance.
  • Чишћење: Clean the exterior of the Bell ME WHT with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Услови животне средине: The Bell ME WHT is not water-resistant. Avoid exposing it to moisture, direct sunlight, or extreme temperatures.

Решавање проблема

ПроблемМогући узрокРешење
Bell ME WHT does not chime.
  • Батерије су празне или су неправилно уметнуте.
  • Not paired with Buzz LO.
  • Ван бежичног домета.
  • Buzz LO is not functioning.
  • Замените батерије новим, водећи рачуна о исправном поларитету.
  • Repeat the pairing process (see "Setup and Installation").
  • Move the Bell ME WHT closer to the Buzz LO.
  • Check the status and functionality of your Buzz LO video doorbell.
Chime sound is too low or distorted.
  • Ниска батерија.
  • Поставка јачине звука је прениска.
  • Замените батерије.
  • Increase the volume using the side buttons.
Cannot pair Bell ME WHT with Buzz LO.
  • Неправилан поступак упаривања.
  • Сметње од других бежичних уређаја.
  • Bell ME WHT is not compatible with your doorbell (only works with Buzz LO).
  • Ensure you follow the pairing steps precisely.
  • Temporarily move other wireless devices away during pairing.
  • Verify that your doorbell is a Marmitek Buzz LO model.

Спецификације

ФеатуреДетаљ
Број моделаBell ME WHT
ПроизвођачМармитек
БојаБела
Димензије (Д к Ш к В)7.5 к 7.5 к 3 цм
Тежина160 г
Извор напајања3 к АА батерије (нису укључене)
Волtage4.5 ВДЦ
Вирелесс Фрекуенци450-470 МХз
Максимални бежични домет300 Meters (open field)
Отпорност на водуНије водоотпоран
КомпатибилностExclusively with Marmitek Buzz LO video doorbell

Гаранција и подршка

Marmitek products are designed and manufactured to high quality standards. For information regarding warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Marmitek website. For technical support, troubleshooting assistance, or further inquiries, please contact Marmitek customer service through their official channels.

Official Marmitek Webсајт: ввв.мармитек.цом

© 2024 Marmitek. All rights reserved.