Лепро 500014

Lepro даљински управљач за подесиву белу ЛЕД траку - упутство за употребу

Модел: 500014

Увод

Thank you for choosing the Lepro Remote Controller for your Tunable White LED Strip Light. This manual provides detailed instructions for setting up, operating, and maintaining your remote control to ensure optimal performance and longevity. Please read this manual thoroughly before use and retain it for future reference.

Производ је завршенview

The Lepro Remote Controller is designed to provide convenient control over your tunable white LED strip lights, allowing you to adjust brightness, color temperature, and activate various lighting modes.

Lepro Remote Controller

Слика: Фронт view of the Lepro Remote Controller.

Функције дугмета даљинског управљача

Lepro Remote Controller Button Functions

Image: Diagram illustrating the functions of each button on the Lepro Remote Controller.

  • Дугмад за укључивање/искључивање: Power on or off the LED strip light.
  • 60S OFF Button: Activates a 60-second auto-off timer.
  • Дугмад за осветљеност +/-: Подесите ниво осветљености светла.
  • WW (Warm White) Button: Sets the light to a warm white color temperature.
  • NW (Neutral White) Button: Sets the light to a neutral white color temperature.
  • DW (Daylight White) Button: Sets the light to a daylight white (cool white) color temperature.
  • Colour Temperature +/- Buttons: Fine-tune the color temperature between warm and cool white.
  • Дугме МОДЕ: Cycles through fast/slow flash modes.
  • Scene Buttons (Morning/Evening/Night): Activates pre-set lighting scenes.

Сетуп

Инсталација батерије

The remote controller requires 1 Lithium Metal battery (included). Before first use, please remove the insulation sheet from the battery compartment.

Remove Insulation Sheet

Image: Illustration showing how to remove the insulation sheet from the battery compartment.

  1. Пронађите одељак за батерије на полеђини даљинског управљача.
  2. Pull out the plastic insulation sheet if it is present.
  3. If replacing the battery, open the battery cover and insert the new battery, ensuring correct polarity (+/-).
  4. Добро затворите поклопац батерије.

Pairing (If Applicable)

This remote control uses Radio Frequency (RF) technology and is typically pre-paired with compatible Lepro tunable white LED strip lights (e.g., models 410098, 410049). If your remote does not respond to the light strip, ensure the light strip is powered on and within the maximum range of 10 meters. No manual pairing procedure is usually required for this model.

Упутство за употребу

Once the battery is installed, you can begin controlling your LED strip light.

  • Укључивање/искључивање: Притисните тастер ON button to turn the light on, and the ОФФ дугме за његово искључивање.
  • Подешавање осветљености: Користите Осветљеност +/- buttons (sun icon with up/down arrows) to increase or decrease the light intensity.
  • Избор температуре боје:
    • Притисните WW for Warm White.
    • Притисните NW for Neutral White.
    • Притисните DW for Daylight White (Cool White).
    Color Temperature Exampлес

    Image: Visual representation of Warm White, Natural White, and Cool White color temperatures.

  • Fine-tuning Color Temperature: Користите Colour Temperature +/- buttons (yellow up/down arrows) to incrementally adjust the color temperature.
  • Режими блица: Притисните тастер МОДЕ button to cycle through different fast/slow flash modes.
  • Режими сцене: Select pre-set scenes using the dedicated buttons:
    • Morning Scene: (Sunrise icon)
    • Evening Scene: (Sunset icon)
    • Night Scene: (Moon and stars icon)
  • 60-Second Auto Off: Притисните тастер 60С ОФФ button to activate a timer that will turn off the light after 60 seconds.

Одржавање

Чишћење

To clean the remote controller, gently wipe it with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the remote in water.

Замена батерије

If the remote control's range decreases or it becomes unresponsive, the battery may need to be replaced. Refer to the "Battery Installation" section under Setup for instructions.

Напомена: Истрошене батерије одлажите одговорно у складу са локалним прописима.

Решавање проблема

ПроблемМогући узрокРешење
Remote not responding to light strip.
  • Батерија је празна или је празна.
  • Insulation sheet not removed.
  • Даљински управљач је ван домета.
  • Light strip is not powered on.
  • Замените батерију.
  • Уклоните изолацијски лим.
  • Move closer to the light strip (within 10 meters).
  • Ensure the light strip is properly connected and powered.
Ограничен опсег контроле.
  • Ниска батерија.
  • Obstructions between remote and light strip.
  • Замените батерију.
  • Ensure a clear line of sight or reduce obstructions.

Спецификације

  • Модел: 500014
  • Бренд: Лепро
  • Димензије производа: 8.5 к 4 к 0.7 цм
  • Тежина: 20 г
  • батерија: 1 Lithium Metal battery (required)
  • Технологија повезивања: Радио фреквенција (РФ)
  • Максимални домет: 10 метара
  • Број дугмади: 14
  • Компатибилни уређаји: Lepro LED Strip Light 410098, LED Strip Light 410049

Важне информације

Рециклирање сијалица

За информације о рециклажи овог производа и других врста лamps, please consult local recycling guidelines and facilities.

Информације о квару сијалице и чишћењу

In case of breakage or damage to associated light bulbs, follow proper clean-up and disposal procedures as recommended by local authorities. Avoid direct contact with broken glass or internal components.

Гаранција и подршка

For warranty information and customer support, please refer to the official Lepro webсајт или контактирајте продавца. Сачувајте рачун као доказ о куповини.

За додатну помоћ, можете посетити Lepro Store on Amazon.

© 2024 Лепро. Сва права задржана.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.