SuperlightingLED FLSDR-RGBCCT-1350

SuperlightingLED DC12V RGB CCT LED Strip Light Instruction Manual

Model: FLSDR-RGBCCT-1350

1. Производ је готовview

The SuperlightingLED DC12V RGB CCT LED Strip Light is a versatile, non-waterproof flexible LED tape light designed for various indoor lighting applications. It features a dual-row design with SMD 5050 LEDs for RGB colors and SMD 2835 LEDs for adjustable warm white (2700K) to daylight white (6000K) illumination. With a high CRI 90+, it ensures accurate color rendering.

Кључне карактеристике:

  • RGBCCT Full Color + High CRI 90+: Offers vibrant RGB lighting and tunable white light from 2700K to 6000K with excellent color accuracy.
  • Dual Row Design, 15mm Wide: High-density configuration with 1350 LEDs per roll for superior brightness, delivering up to 24,300 lumens.
  • 12V DC Powered, Cuttable & Extendable: Operates safely on 12V DC. Each 5-meter (16.4ft) roll can be cut every 9 LEDs for custom lengths.
  • Flexible with Strong Adhesive Backing: Easy installation on various surfaces due to its flexibility and durable adhesive.
  • Свестране апликације: Suitable for workbenches, retail displays, signage backlighting, videography, cabinet lighting, under-cabinet lighting, showcases, and trade show displays.

Садржај пакета:

  • 1 x 16.4FT LED strip light

Напомена: This package includes only the LED strip light. A compatible 12V DC power supply and an RGBCCT controller are required for operation and must be purchased separately.

2. Безбедносне информације

  • Само за унутрашњу употребу: This LED strip light is non-waterproof (IP20 rated) and designed exclusively for indoor applications. Do not expose to moisture, water, or outdoor elements.
  • Напајање: Use only a compatible 12V DC power supply. Connecting to an incorrect voltagможе оштетити траку и представљати безбедносни ризик.
  • Електричне везе: All electrical connections should be performed by a qualified individual if you are unsure. Ensure power is disconnected before making any connections or modifications.
  • Сечење: Only cut the LED strip at designated cut marks (every 9 LEDs). Cutting elsewhere will damage the circuit and render that section unusable.
  • топлота: While LED strips generate minimal heat, ensure adequate ventilation, especially when installed in enclosed spaces. Do not cover the strip with materials that could trap heat.
  • Монтажна површина: Ensure the mounting surface is clean, dry, and free of dust or grease for optimal adhesive performance.

3. Спецификације производа

ФеатуреДетаљ
Тип ЛЕД тракеSMD 5050 RGB + SMD 2835 Warm White + SMD 2835 Daylight White
Радна температура-4°Ф (-20°Ц) ~ 122°Ф (50°Ц)
Лигхт ЦолорRGB + Warm White + Daylight White
Димензија16.4Ft (5m) / roll
Cuttable UnitEvery 9 LEDs (12V)
ЛЕД количина1350 LEDs / roll
Животни век50,000+ сати
Strip Dimensions (L x W x H)5000cm (197 in) x 1.5cm (0.59 in) x 0.25cm (0.1 in)
Улазни волtage12В ДЦ
Working Power (Max)150W / 16.4ft (9.15W / foot)
Lamp Луминоус Флук18-20 Lumens / LED, 1,500 Lm / Ft, 24,300 Lumens / 16.4ft
Color Temperature CCT (White)Warm White (2700K) to Daylight White (6000K)
Беам Паттерн120 степени
Водоотпорна оценаNon-waterproof IP20
CRI (Ra>)90+
ПЦБ Видтх15 мм (0.59 инча)
Тежина артикла6.4 унци
Контролни методApp, Voice (with compatible controller)

4. Упутства за подешавање

4.1 Components Required (Sold Separately):

  • 12В ДЦ напајање: Ensure the power supply has sufficient wattage for the length of the LED strip used.
  • RGBCCT LED Controller: A compatible controller (e.g., RF remote or WiFi controller) is necessary to control the color, brightness, and color temperature of the strip.

Example of compatible accessories:

Wiring diagram for RGBCCT LED strip with controller and power supply, showing compatible accessories like a WiFi controller, RF remote, and 24V 200W power supply.

Wiring diagram showing connections to controller and power supply, with examples of compatible accessories.

4.2 Пре-инсталација:

  1. Изглед плана: Determine the desired path for your LED strip. Measure the length required.
  2. Чиста површина: Ensure the mounting surface is clean, dry, smooth, and free of dust or oil for optimal adhesion.
  3. Компоненте теста: Before permanent installation, connect the LED strip, controller, and power supply to ensure all components function correctly.

4.3 Кораци инсталације:

  1. Cutting the LED Strip (if necessary):
    The LED strip can be cut every 9 LEDs at the designated cut marks. Use sharp scissors to ensure a clean cut.
    Images demonstrating the cut points on the LED strip, the strong blue adhesive backing, and measurements of the PCB width (15mm) and cut length (33mm).

    Illustration of LED strip cut points and dimensions.

    Важна напомена: The PCB width is 15mm, and the sleeve width is 17mm. Standard 6-pin quick connectors are not compatible with this width. It is recommended to cut and solder connections for custom lengths.

  2. Повезивање ЛЕД траке:
    Connect the LED strip to the RGBCCT controller. This strip uses a 5-wire connection (DC12V+, Red, Green, Blue, Warm White, Daylight White). Ensure correct polarity and wire assignment.
    Diagram showing the components of the RGB CCT LED strip, including SMD 5050 for RGB and SMD 2835 for Warm White and Daylight White. It also illustrates the wiring for a 5-wire connection.

    Detailed wiring diagram for the RGBCCT LED strip.

  3. Повезивање напајања:
    Connect the RGBCCT controller to the 12V DC power supply. Refer to the controller's manual for specific wiring instructions.
  4. Mounting the LED Strip:
    Peel off the protective backing from the strong blue adhesive on the back of the LED strip. Carefully press the strip onto the prepared surface, ensuring firm and even contact along its entire length.

5. Упутство за употребу

Operation of the SuperlightingLED RGB CCT LED Strip Light requires a compatible RGBCCT controller (purchased separately). The specific functions and controls will depend on the model of controller you are using. Refer to your controller's instruction manual for detailed operating procedures.

General Operation (via compatible controller):

  • Укључивање/искључивање: Use the designated power button on your controller or app.
  • Избор боја: Select from 16 million RGB colors using the color wheel or preset buttons on your controller/app.
    Visual representation of the LED strip displaying red, green, and blue colors, highlighting the 4096 grades and 16 million color possibilities.

    RGB color display capabilities.

  • Подешавање белог светла: Adjust the white light color temperature from warm white (2700K) to daylight white (6000K).
    The LED strip illuminated in Warm White (2800K), Natural White (4500K), and Daylight White (6500K), demonstrating the adjustable color temperature range.

    Adjustable white light color temperatures.

  • Контрола осветљења: Dim or brighten the light output to your desired level.
  • Modes/Scenes: Many controllers offer pre-programmed dynamic modes or the ability to create custom scenes.
  • App/Voice Control: If using a WiFi controller, you may be able to control the strip via a smartphone app or voice assistants.
    Examples of the LED strip used in various indoor settings, showcasing its ability to produce any color and its application in ambient lighting.

    Example of indoor application and app control.

6. Одржавање

  • Чишћење: Ensure the LED strip is powered off and cool before cleaning. Gently wipe the surface with a soft, dry, or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or excessive moisture.
  • инспекција: Periodically inspect the strip for any signs of damage, loose connections, or adhesive degradation.
  • Складиштење: If storing the LED strip, ensure it is rolled neatly and kept in a dry, cool environment away from direct sunlight and extreme temperatures.

КСНУМКС. Решавање проблема

ПроблемМогући узрокРешење
ЛЕД трака не светли.Нема напајања за траку/контролер.
Неисправно ожичење.
Неисправно напајање или контролер.		Check if the power supply is plugged in and receiving power.
Verify all wiring connections between the strip, controller, and power supply are correct and secure.
Test the power supply and controller with another compatible device if possible.
Incorrect colors or white light.Incorrect wiring to the controller.
Controller settings are wrong.		Ensure the R, G, B, WW, DW, and 12V+ wires are connected to the correct terminals on the controller.
Refer to your controller's manual to ensure it is set to the correct output mode for RGBCCT strips.
Section of the strip is not lighting up.Damage to the strip.
Incorrect cut.		Inspect the non-working section for physical damage. If a section was cut incorrectly (not at the designated marks), it may be permanently damaged.
Adhesive is not holding.Surface not properly cleaned.
Surface is porous or uneven.		Ensure the surface is thoroughly cleaned and dry before application. For porous or uneven surfaces, consider using additional mounting clips or stronger adhesive.

8. Гаранција и подршка

8.1 Информације о гаранцији:

This product is covered by the manufacturer's standard warranty. For specific details regarding warranty duration and terms, please refer to the documentation provided with your purchase or contact the seller directly.

8.2 Корисничка подршка:

If you encounter any issues or have questions not covered in this manual, please contact the seller or manufacturer for assistance. When contacting support, please have your product model number (FLSDR-RGBCCT-1350) and purchase information readily available.