HYPERLITE 4FT 40W паронепропусно ЛЕД светло упутство за употребу

1. Производ је готовview

The HYPERLITE 4FT 40W Vapor Tight LED Light is a durable and efficient lighting fixture designed for challenging environments. It provides bright, cool white illumination and features a robust, sealed construction for protection against dust and water.

Кључне карактеристике:

Висока осветљеност: 40W, 5200 lumens, 130 lumens per watt.
Издржљива конструкција: Polycarbonate material with stainless clips for a vapor-tight seal.
Заштита животне средине: IP65 rated for dust and water resistance.
Виде Волtagе Распон: Operates on 100-277V AC.
Дуг животни век: Rated for over 50,000 hours.
Сертификати: УЛ на листи за сигурност и поузданост.

2. Безбедносне информације

Please read and understand all safety instructions before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards.

Always disconnect power at the circuit breaker before installing or servicing the fixture.
Инсталацију треба да изврши квалификовани електричар у складу са националним и локалним електричним прописима.
Do not install in areas where the operating temperature exceeds the specified range (-22°F to 113°F).
Уверите се да су сви прикључци сигурни и правилно изоловани.
Не модификујте уређај на било који начин.

3. Инсталација

The HYPERLITE Vapor Tight LED Light is designed for easy surface mounting on ceilings or walls. Mounting hardware is included.

3.1. Садржај пакета

HYPERLITE 4FT 40W Vapor Tight LED Light Fixture
Монтажни носачи
Вијци и анкери
Жичане матице

Dimensions and included accessories for the HYPERLITE Vapor Tight LED Light — Image 2: Dimensions of the fixture (47.24"L x 3.54"W x 3.26"H) and a visual representation of the included mounting hardware.

3.2. Упутства за монтирање

Припремите простор за инсталацију: Ensure the power is off at the circuit breaker. Select a suitable location for mounting on a ceiling or wall.
Означите рупе за монтажу: Use the mounting brackets as a template to mark the desired locations for drilling holes.
Инсталирајте носаче за монтажу: Drill pilot holes and secure the mounting brackets to the surface using the provided screws and anchors.
Причврстите уређај: Carefully snap the LED light fixture into place on the installed mounting brackets. Ensure it is securely seated.
Reinforce (Optional): For added security, use the nut reinforcement installation method if applicable to your mounting brackets.

Three-step quick installation guide for the HYPERLITE Vapor Tight LED Light — Image 3: Visual guide demonstrating the three steps for quick installation: marking holes, snapping the fixture, and securing with nuts.

3.3. Електрично ожичење

The fixture includes a terminal block for quick and secure wiring connections.

Connect the live (black) wire from your power source to the live terminal on the fixture.
Connect the neutral (white) wire from your power source to the neutral terminal on the fixture.
Connect the ground (green/bare copper) wire from your power source to the ground terminal on the fixture.
Ensure all connections are tight and properly insulated with wire nuts.

3.4. Daisy Chain Connection

Multiple HYPERLITE Vapor Tight LED Lights can be daisy-chained together using the integrated 2-foot wire for simplified wiring. The 40W model can connect up to 17 lamps.

Diagram showing multiple HYPERLITE LED lights connected in a daisy chain configuration — Image 4: Illustration of the daisy chain feature, allowing multiple fixtures to be linked from a single power source, reducing wiring complexity.

4. Операција

Once installed and wired correctly, the HYPERLITE Vapor Tight LED Light operates by a standard electrical switch (push button type). Ensure the power supply is restored after installation.

4.1. Intended Use Environments

This fixture is suitable for both indoor and outdoor use in various demanding environments, including:

Garages and Workshops
Barns and Agricultural Buildings
Cold Storage and Walk-in Freezers (operating range -22°F to 113°F)
Outdoor Corridors and Porches
Warehouses and Industrial Facilities
Аутопераонице

HYPERLITE LED light installed in a car wash environment — Image 5: The vapor tight LED light providing illumination in a car wash, demonstrating its suitability for wet environments.

5. Одржавање

The HYPERLITE Vapor Tight LED Light requires minimal maintenance due to its durable and sealed design.

5.1. Чишћење

Уверите се да је напајање искључено пре чишћења.
Обришите спољашњост уређаја меком,amp тканина.
Do not use abrasive cleaners or solvents, as these may damage the polycarbonate material.
The IP65 rating ensures protection against dust and water jets, making external cleaning straightforward.

Close-up of waterproof connectors on the HYPERLITE LED light — Image 6: Detail of the waterproof connectors, highlighting the strong sealing and ease of cleaning for wet locations.

5.2. Инспекција

Periodically inspect the fixture for any signs of physical damage or loose connections.
Проверите носаче за монтажу да бисте били сигурни да су остали безбедни.

КСНУМКС. Решавање проблема

If you encounter issues with your HYPERLITE Vapor Tight LED Light, refer to the following common troubleshooting steps:

Проблем	Могући узрок	Решење
Светло се не пали	Нема напајања Слаба веза ожичења Неисправан прекидач	Check circuit breaker and power source Verify all wiring connections are secure Тестирајте или замените прекидач
Светло је слабо или трепери	Нетачна волtage Лабава веза Fixture damage	Обезбедите волtage is within 100-277V range Проверите везе ожичења Contact customer support if damaged
Water or dust inside fixture	Неправилна инсталација Damage to seal	Ensure all seals and clips are properly secured Inspect for cracks or damage; contact support

If these steps do not resolve the issue, please contact HYPERLITE customer support.

7. Спецификације

Detailed technical specifications for the HYPERLITE 4FT 40W Vapor Tight LED Light.

Атрибут	Спецификација
Назив модела	Вапор Тигхт Лигхт
Број модела ставке	LED-JJ-21W-TRI
Ватtage	40 Ваттс
Осветљеност	5200 лумена
Луминоус Еффицаци	130 лумена по вату
Температура боје	5000К (хладно бело)
Волtage	КСНУМКС-КСНУМКСВ АЦ
Димензије (Д к Ш к В)	47.24 cm x 3.54 cm x 3.26 cm
Тежина артикла	4.74 фунти
Материјал	Поликарбонат
ИП Ратинг	IP65 (Dustproof and Waterproof)
Радна температура	-22°Ф до 113°Ф (-30°Ц до 45°Ц)
Животни век	50,000+ Хоурс
Цертификати	УЛ Листед
Тип монтаже	Surface (Ceiling/Wall)
Укључене компоненте	Монтажни хардвер

8. Гаранција и подршка

HYPERLITE stands behind the quality of its products.

8.1. Информације о гаранцији

Овај производ долази са а 36-месечна гаранција од дана куповине. Ова гаранција покрива недостатке у материјалу и изради при нормалној употреби.

8.2. Политика поврата

A Рок за враћање од 30 дана is offered for this product.

8.3. Корисничка подршка

For any questions, technical assistance, or warranty claims, please contact HYPERLITE customer service. Our dedicated team is available to provide exceptional after-sales support.

Please refer to the HYPERLITE official webсајт или вашу документацију о куповини за контакт податке.

HYPERLITE LED-JJ-21W-TRI