ELEGANT BL-343472CB

ELEGANT Corner Shower Enclosure Instruction Manual

Модел: BL-343472CB | Бренд: ЕЛЕГАНТ

1. Увод и безбедносне информације

This manual provides detailed instructions for the installation, operation, and maintenance of your ELEGANT Corner Shower Enclosure. Please read all instructions carefully before beginning installation to ensure safe and proper assembly and use.

Мере предострожности:

  • Увек носите заштитне наочаре током инсталације.
  • Рукујте стакленим плочама изузетно пажљиво. Каљено стакло, иако чврсто, може се разбити ако се удари по ивицама.
  • Ensure the installation surface is level and structurally sound.
  • Препоручује се професионална инсталација.
  • Two people are recommended for lifting and positioning glass panels.

2. Спецификације производа

ФеатуреДетаљ
Димензије34 in. D x 34 in. W x 72 in. H
Тип стакла1/4 inch (6mm) Clear Tempered Glass (ANSI Z97.1 certified)
Завршетак хардвераБрусхед Ницкел
Врата ТипDouble Sliding
Број панела2 Stationary, 2 Sliding
Подешавање ширинеUp to 20 mm (0.79 inches) per side
Обавезна монтажаДа

3. Садржај пакета

Before installation, verify that all parts are included as listed in your product's instruction manual diagram. Key components include:

  • Glass Panels (Fixed and Sliding)
  • Валл Проfiles
  • Top and Bottom Rails
  • Door Handles (Stainless Steel)
  • Rollers (Rust-proof Stainless Steel)
  • Magnetic Water Retaining Strips
  • Screws, Wall Plugs, and Decorative Covers
  • Rail Adapters and Limit Blocks

4. Подешавање и инсталација

Follow these steps for proper installation. Refer to the included diagram for part numbers and visual guidance. Two people are recommended for certain steps.

4.1. Wall Profile Инсталација

  1. Position a wall profile vertically on the wall according to your model size. Mark the wall with the hole positions on the profile. Ensure holes are not too close to tile edges.
  2. Drill holes at the marked positions using a 6mm (0.2362 inch) drill bit.
  3. Insert the wall plugs into the holes with a hammer.
  4. Причврстите зид проfile to the wall with screws and put on the screw cover.
  5. Repeat the same operation for the other wall profile.

4.2. Fixed Panel Assembly

  1. Secure the rails and glass panels with screws, then put on the screw covers.
  2. Secure the side profile and glass with screws.
  3. Install the limit blocks with screws, then put on the screw cover.
  4. Install the water retaining strip.
  5. Repeat for the other fixed panel.

4.3. Fixed Panel Installation

  1. Insert the fixed panel into the wall profile. (Two people recommended for this action).
  2. Connect the two fixed panels using the rail adapter and screw.
  3. Put on the decorative covers.

4.4. Moving Panel Assembly

  1. Install the wheels on the moving panels, then put on the decorative cover.

4.5. Moving Panel Installation

  1. Firstly, hang the moving panel by the wheels on the top rail.
  2. Then press the button to fit the wheels into the bottom rail.
  3. Поновите за другу страну.

4.6. Завршни додири

  1. Install the handles on the moving panels.
  2. Install the magnetic water retaining strips.
  3. Install the regular water retaining strips.
  4. Secure the fixed panels with wall profiles using screws, then put on the decorative covers.
  5. Apply silicone sealant to the outside edges of the profiles. Allow at least 24 hours for the sealant to dry before use.

Видео водич за инсталацију:

Official ELEGANT Installation Guide for Sliding Corner Shower Enclosures. This video provides visual instructions for the assembly process.

ELEGANT Corner Shower Door Overview: This video highlights key features such as quality aluminum hardware, width adjustment, rust-proof rollers, magnetic seal, anti-collision design, and stainless steel handles.

5. Упутство за употребу

Your ELEGANT Corner Shower Enclosure features double sliding doors designed for smooth and quiet operation.

  • Отварање/Затварање: Gently push or pull the stainless steel handles to slide the doors along the top and bottom rails. The rust-proof stainless steel rollers ensure effortless movement.
  • Water Seal: The full-length magnetic door strips ensure a tight seal when the doors are closed, preventing water spillage outside the enclosure.
  • Дизајн против судара: The integrated anti-collision design helps to lessen the impact when the doors meet, contributing to durability and safety.

Кључне карактеристике:

Flexible width adjustment mechanism

Flexible Adjustment: Each side allows up to 20mm of width adjustment for a precise fit.

Magnetic seal strip for shower doors

Magnetic Seal Strip: Ensures the shower doors close tightly, preventing water from escaping.

Quick release bottom rollers for easy cleaning

Quick Release Bottom Rollers: Designed for easy removal and cleaning of the glass panels.

6. Одржавање

Regular cleaning and maintenance will ensure the longevity and appearance of your shower enclosure.

  • Чишћење стакла: Use a soft cloth and a non-abrasive glass cleaner. Avoid harsh chemicals or abrasive pads that can scratch the glass or damage the finish. For stubborn water spots, a vinegar-water solution can be effective.
  • Оквир и хардвер: Wipe down the brushed nickel frame and stainless steel handles with a soft, damp cloth. Dry immediately to prevent water spots. Avoid cleaners containing ammonia, bleach, or abrasive agents.
  • Rollers and Tracks: Periodically clean the top and bottom tracks to remove any soap scum or debris that could hinder smooth door operation. The quick-release bottom rollers facilitate easy access for cleaning.
  • Печати: Inspect magnetic and regular water retaining strips for wear or damage. Replace if necessary to maintain a watertight seal.

КСНУМКС. Решавање проблема

Уобичајени проблеми и решења:

  • цурење воде:
    • Check if the magnetic strips are properly aligned and sealing.
    • Ensure all water retaining strips are correctly installed and free from damage.
    • Verify that silicone sealant was applied correctly to the outside profiles and allowed to dry completely.
  • Врата се не отварају глатко:
    • Clean the top and bottom tracks to remove any debris or soap scum.
    • Inspect the rollers for any obstructions or damage.
  • Doors Not Closing Tightly:
    • Check the alignment of the magnetic strips. They should meet flush.
    • Ensure the wall profiles are securely fastened and the enclosure is square.

8. Гаранција и подршка

ELEGANT products are designed for quality and durability. For specific warranty details, please refer to your purchase documentation or contact customer support.

Корисничка подршка:

For assistance with online orders or product inquiries, please:

  • Tap "Your Account" - "Order Detail" - "Message Center" on your purchase platform.
  • You may also reach us through sunnyshowerusa@gmail.com.

Thank you for choosing ELEGANT.

© 2023 ELEGANT. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.