Увод
This manual provides essential information for the proper installation, operation, and maintenance of your FLOMEC TM Series Water Meter, model TM10NQ9GMA. This meter is designed for accurate measurement of liquid flow in various applications, including water processing and irrigation. Please read this manual thoroughly before using the product to ensure safe and efficient operation.
Безбедносне информације
- Увек носите одговарајућу личну заштитну опрему (ППЕ) током инсталације и одржавања.
- Ensure the system is depressurized and drained before attempting any installation or service.
- Do not exceed the specified pressure and temperature ratings of the meter.
- Verify proper sealing of all connections to prevent leaks.
- Keep batteries out of reach of children. Dispose of batteries according to local regulations.
Производ је завршенview
The FLOMEC TM Series Water Meter is an economical and robust solution for liquid flow measurement. It features a durable schedule 80 PVC housing and a local display that provides real-time flow rate, accumulated total, and a resettable total. The meter supports three engineering units: Gallons, Liters, and Cubic Feet. It is factory-calibrated and battery-operated for ease of use.
Подешавање и инсталација
The TM10NQ9GMA model features 1-inch Female NPT fittings for straightforward integration into your piping system. Proper installation is crucial for accurate readings and long-term performance.
Кораци инсталације:
- Prepare the Piping: Ensure the pipe section where the meter will be installed is clean and free of debris. The meter requires a straight run of pipe before and after for optimal accuracy.
- Orient the Meter: Observe the flow direction arrow on the meter body. Install the meter so that the arrow aligns with the direction of liquid flow in your system.
- Connect Fittings: Apply appropriate thread sealant (e.g., PTFE tape or pipe dope) to the 1-inch Male NPT threads of your piping. Carefully thread the meter onto the pipe fittings. Do not overtighten, as this can damage the PVC housing.
- Проверите да ли има цурења: Slowly pressurize the system and inspect all connections for leaks. Tighten as necessary.
- Инсталација батерије: The meter comes with two AAA alkaline batteries pre-installed. If replacement is needed, refer to the Maintenance section.
Упутство за употребу
The FLOMEC TM Series Water Meter is designed for simple operation with its intuitive display and two-button interface.
Функције приказа:
- Брзина протока: Shows the instantaneous flow rate of the liquid.
- Укупан зброј: Displays the cumulative total volume of liquid that has passed through the meter since its initial installation. This total is non-resettable.
- Ресетујуће укупно: Displays a total volume that can be reset for batching or specific measurement periods.
Функције дугмета:
- RATE Button: Press to cycle through display modes, typically showing flow rate.
- TOTAL Button: Press to cycle through totalizer modes (Grand Total, Resettable Total). Hold to reset the Resettable Total.
Промена јединица:
The meter supports Gallons, Liters, and Cubic Feet. Refer to the detailed programming instructions in the full product manual (if available) for specific steps on how to change the displayed units. Typically, this involves a combination of button presses during power-up or a specific menu sequence.
Одржавање
Regular maintenance ensures the longevity and accuracy of your FLOMEC TM Series Water Meter.
Замена батерије:
The meter operates on two AAA alkaline batteries. When the battery indicator appears on the display, it is time to replace them.
- Ensure the system is depressurized and the meter is accessible.
- Locate the battery compartment on the top of the display unit.
- Carefully remove the screws securing the battery cover.
- Remove the old AAA batteries and insert two new AAA alkaline batteries, observing correct polarity.
- Replace the battery cover and tighten the screws to ensure a watertight seal.
Чишћење:
Periodically clean the exterior of the meter with a damp cloth. Do not use harsh chemicals or abrasive cleaners, as these may damage the housing or display.
Решавање проблема
If you encounter issues with your FLOMEC TM Series Water Meter, refer to the following common troubleshooting steps:
| Проблем | Могући узрок | Решење |
|---|---|---|
| Нема дисплеја или је дисплеј замагљен | Празне или празне батерије | Replace batteries with new AAA alkaline batteries. |
| Нетачна очитавања | Incorrect installation (e.g., wrong flow direction, insufficient straight pipe run) | Verify meter orientation and ensure adequate straight pipe sections before and after the meter. |
| No flow reading despite liquid flow | Obstruction in the meter or sensor issue | Depressurize and inspect the meter for any blockages. If the issue persists, contact technical support. |
| Цурење на спојевима | Improperly sealed threads or damaged fittings | Depressurize, reapply thread sealant, and retighten connections. Inspect fittings for damage. |
For issues not covered here, please contact FLOMEC customer support.
Спецификације
Detailed technical specifications for the FLOMEC TM Series Water Meter (TM10NQ9GMA).
| Феатуре | Спецификација |
|---|---|
| Број модела | TM10NQ9GMA |
| Фиттинг Типе | 1 inch Female NPT |
| Опсег протока | 5 to 50 Gallons Per Minute (19 to 190 Liters Per Minute) |
| Прецизност | ±3.0% очитавања |
| Рејтинг притисак | 225 PSI at 73°F (pressure rating reduces with higher temperature) |
| Опсег радне температуре | 32°Ф до 140°Ф (0°Ц до 60°Ц) |
| Дисплаи Унитс | Gallons, Liters, Cubic Feet |
| Извор напајања | 2 к ААА алкалне батерије |
| Димензије пакета | 8.98 к 4.17 к 3.94 инча |
| Тежина артикла | 1 фунта |
| Произвођач | Great Plains Industries |
Гаранција и подршка
The FLOMEC TM Series Water Meter is manufactured by Great Plains Industries. For specific warranty information, technical support, or service inquiries, please refer to the documentation included with your product or visit the official FLOMEC webсајт. Препоручује се да сачувате доказ о куповини за потребе гаранције.