Scheppach HM254

Scheppach HM254 Mitre Saw and UMF2000 Support Stand Instruction Manual

Model: HM254, UMF2000 | Brand: Scheppach

1. Важна безбедносна упутства

Always observe basic safety precautions when operating power tools to reduce the risk of fire, electric shock, and personal injury. Read all instructions carefully before use.

  • Безбедност на радном месту: Радно место одржавајте чистим и добро осветљеним. Неред или тамна места могу изазвати несреће. Немојте користити електричне алате у експлозивним атмосферама, као што је присуство запаљивих течности, гасова или прашине.
  • електрична безбедност: Power tool plugs must match the outlet. Never modify the plug. Avoid body contact with earthed or grounded surfaces.
  • Лична безбедност: Увек носите заштиту за очи. Користите заштиту за уши када радите са бучним алатима. Обуците се прикладно; избегавајте широку одећу или накит. Осигурајте дугу косу.
  • Употреба и одржавање алата: Не форсирајте електрични алат. Користите одговарајући електрични алат за вашу примену. Искључите утикач из извора напајања пре него што извршите било каква подешавања, промените додатну опрему или одложите електрични алат.
  • Mitre Saw Specific Safety: Ensure the blade guard is always in place and functioning correctly. Keep hands away from the cutting area. Secure the workpiece firmly before cutting. Allow the blade to reach full speed before beginning a cut.
  • Ласерска безбедност: Do not stare directly into the laser beam. Avoid directing the laser beam at other persons or reflective surfaces.

2. Производ је готовview

The Scheppach HM254 Mitre Saw is a powerful tool designed for precise cutting of wood, plastic, and aluminum. It comes bundled with the UMF2000 Support Stand for enhanced stability and versatility.

Садржај комплета:

  • Scheppach HM 254 Mitre Saw
  • HW 48T Saw Blade
  • HW 60T Saw Blade
  • Scheppach UMF 2000 Support Stand

Кључне карактеристике:

  • Снажан мотор: 2000W motor for versatile cutting tasks.
  • Precision Laser Guide: Integrated laser for accurate cutting line indication.
  • Wide Cutting Capacity: Up to 340 mm cutting width and 90 mm cutting height.
  • Благи почетак: Ensures a smooth and controlled start-up.
  • Издржљива конструкција: Stable and lightweight die-cast aluminum frame.
  • Побољшана безбедност: Fully enclosed blade guard.
  • UMF2000 Support Stand: Provides ergonomic working height, lightweight yet sturdy construction, universal machine grip, and a maximum load capacity of 250 kg. Features extendable side supports for long workpieces.
Scheppach HM254 Mitre Saw and UMF2000 Support Stand
Figure 1: Scheppach HM254 Mitre Saw with UMF2000 Support Stand. This image displays the complete product package, including the mitre saw and its accompanying support stand, highlighting their combined functionality.

3. Подешавање

Распакивање и преглед:

  1. Пажљиво уклоните све компоненте из паковања.
  2. Verify that all listed kit contents are present.
  3. Inspect all parts for any signs of shipping damage. Do not operate the tool if damage is found.

HM254 Mitre Saw Assembly:

  1. Инсталација оштрице: Ensure the saw is unplugged. Open the blade guard. Carefully mount the desired saw blade (HW 48T for general purpose, HW 60T for finer cuts) onto the arbor, ensuring the rotation direction matches the arrow on the guard. Secure with the arbor nut.
  2. Монтажа на базу: Secure the saw to a stable workbench or the UMF2000 support stand using appropriate bolts and nuts.
  3. Подешавања: Familiarize yourself with the miter angle, bevel angle, and depth adjustment mechanisms. Refer to the markings for common angles.
  4. Ласерско поравнање: The laser guide is pre-calibrated, but check its alignment with a test cut on scrap material. Adjust if necessary according to the detailed instructions in the full manual.
Scheppach HM254 Mitre Saw with two saw blades
Figure 2: Scheppach HM254 Mitre Saw with included saw blades. This image shows the mitre saw alongside the two different saw blades (48T and 60T) provided, illustrating the blade options for various cutting tasks.

UMF2000 Support Stand Assembly:

  1. Leg Setup: Unfold the legs of the UMF2000 stand and ensure they are securely locked in place.
  2. Attaching the Saw: Place the HM254 mitre saw onto the universal adjustable machine grips of the UMF2000 stand. Secure the saw using the provided clampс или завртње.
  3. Adjusting Support Arms: Extend the side support arms to the desired length for supporting long workpieces. Adjust the height of the support rollers to match the saw's cutting surface.
Scheppach UMF2000 Support Stand
Figure 3: Scheppach UMF2000 Support Stand. This image displays the UMF2000 support stand in its assembled state, highlighting its extendable arms and sturdy construction, ready to support a mitre saw.

4. Операција

Општа операција:

  1. Прикључак за напајање: Connect the saw to a 230V power supply. Ensure the power outlet is properly grounded.
  2. Погодност материјала: The HM254 is suitable for cutting wood, plastic, and aluminum. Always use the appropriate blade for the material.
  3. Осигурање радног комада: Увек клamp the workpiece firmly to the fence and table before making any cut. Never hold the workpiece by hand.

Процедуре сечења:

  • Miter Cuts: Adjust the turntable to the desired angle (left or right). Lock the turntable securely.
  • Коси резови: Adjust the saw head to the desired bevel angle (typically left only for this model). Lock the saw head securely.
  • Compound Cuts: Combine miter and bevel adjustments for complex angles.
  • Using the Laser Guide: Activate the laser to project a cutting line onto the workpiece. Align the workpiece with this line for precise cuts.
  • Прављење реза: With the workpiece secured, depress the trigger to start the saw. Allow the blade to reach full speed (soft start will manage this smoothly). Slowly lower the saw head through the material. Once the cut is complete, release the trigger and allow the blade to stop completely before raising the saw head.
Scheppach HM254 Mitre Saw on a workbench with wood
Figure 4: Scheppach HM254 Mitre Saw in a workshop setting. This image shows the mitre saw positioned on a workbench with various pieces of wood, demonstrating its intended use for woodworking tasks.

5. Одржавање

Regular maintenance ensures the longevity and safe operation of your Scheppach HM254 Mitre Saw and UMF2000 Support Stand.

Чишћење:

  • Sawdust Removal: After each use, disconnect the saw from power and use a brush or vacuum cleaner to remove sawdust and debris from the motor vents, blade guard, and table.
  • Чишћење оштрице: Periodically clean the saw blade to remove resin and pitch buildup, which can affect cutting performance. Use a suitable blade cleaner.

Замена оштрице:

  1. Безбедност на првом месту: Always unplug the saw before attempting to change the blade.
  2. Уклоните стару оштрицу: Use the provided wrench to loosen the arbor nut while holding the blade still with the blade lock button. Carefully remove the old blade.
  3. Инсталирајте нову оштрицу: Place the new 255mm blade onto the arbor, ensuring the teeth are oriented correctly for cutting (matching the rotation arrow). Tighten the arbor nut securely.

подмазивање:

Periodically apply a light machine oil to moving parts, such as the sliding mechanism and pivot points, to ensure smooth operation. Avoid lubricating electrical components.

Складиштење:

Store the saw and stand in a clean, dry, and secure location, out of reach of children. Protect the blade from damage during storage.

КСНУМКС. Решавање проблема

This section addresses common issues you might encounter during the operation of your mitre saw.

  • Тестера се не покреће:
    • Проверите да ли је кабл за напајање безбедно прикључен у утичницу под напоном.
    • Проверите да ли се прекидач није искључио.
    • Ensure the safety switch or trigger lock is fully engaged.
  • Нетачни резови:
    • Проверите да ли је сечиво тупо или оштећено и замените га ако је потребно.
    • Уверите се да је радни предмет цлamped securely and not shifting during the cut.
    • Verify that all angle adjustments (miter, bevel) are locked tightly.
    • Calibrate the laser guide if it appears misaligned.
  • Претерана вибрација или бука:
    • Inspect the blade for damage, missing teeth, or improper installation.
    • Ensure all mounting bolts for the saw and stand are tight.
    • Check for any loose components or debris within the saw mechanism.
  • Blade Binding in Material:
    • Ensure the workpiece is properly supported and not pinching the blade.
    • Do not force the saw; allow the blade to cut at its own pace.
    • Check if the blade is dull or has excessive resin buildup.

7. Спецификације

Scheppach HM254 Mitre Saw:

  • Улазна снага: 2000В
  • Волtage: 230В
  • Пречник сечива: 255 мм
  • Blade Rotation Speed: 4500 РПМ
  • Cutting Width (90°/90°): 340 к 90 мм
  • Cutting Width (90°/45°): 340 к 45 мм
  • Cutting Width (45°/90°): 240 к 90 мм
  • Cutting Width (45°/45°): 240 к 45 мм
  • Димензије (Д к Ш к В): 770 к 595 к 590 мм
  • Тежина: 14.3 кг
  • Материјал сечива: Aluminum Oxide (for included blades)
  • Препорука за површину: Aluminum, Plastic, Wood

Scheppach UMF2000 Support Stand:

  • Максимални капацитет оптерећења: 250 кг
  • Length (Extendable Supports): 1160 - 2000 mm
  • Height with Support Arm: 900 мм
  • Ширина табеле: Макс. 375 мм
  • Тежина: 13.5 кг

8. Гаранција и подршка

Scheppach products are manufactured to high-quality standards and undergo strict quality controls. This product is covered by a manufacturer's warranty against defects in materials and workmanship.

For warranty claims, technical support, or spare parts, please contact your authorized Scheppach dealer or visit the official Scheppach webсајт за детаљне контакт информације.

Молимо вас да сачувате доказ о куповини ради гаранције.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.