1. Увод
This manual provides instructions for the safe installation, operation, and maintenance of your TALOYA Upgraded Flush Mount LED Ceiling Light. Please read this manual thoroughly before installation and retain it for future reference.
The TALOYA 8293 is a dimmable LED ceiling light fixture featuring three selectable color temperatures (3000K, 4000K, 6500K) and a low-profile design, suitable for various indoor applications.
2. Безбедносне информације
УПОЗОРЕЊЕ: Опасност од струјног удара. Искључите напајање на прекидачу пре инсталације или сервисирања.
- Ensure the main power supply is turned off before beginning installation.
- Installation should be performed by a qualified electrician or a person with adequate knowledge of electrical wiring.
- Овај уређај је дизајниран само за унутрашњу употребу.
- Не покушавајте да модификујете уређај. Било какве модификације могу поништити гаранцију и створити безбедносни ризик.
- The fixture is constructed with a high-quality refractory plastic shell, providing insulation and preventing leakage hazards from short circuits. Ground wire connection is not required during installation.
- Уверите се да површина за монтажу може да издржи тежину уређаја.
3. Садржај пакета
Пре инсталације проверите да ли су све компоненте присутне:
- LED Ceiling Light Fixture (integrated LED bulb)
- Монтажна основна плоча
- Монтажни завртњи
- Жичане матице
- Упутство за употребу
4. Спецификације
| Феатуре | Спецификација |
|---|---|
| Бранд | ТАЛОИА |
| Број модела | 8293 |
| Боја | Black (Fixture), White (Shade) |
| Материјал | Пластика |
| Димензије производа | 15.75 cm D x 15.75 cm Š x 0.94 cm V |
| Врста инсталације | Флусх Моунт |
| Тип извора светлости | ЛЕД |
| Ватtage | 24 Ваттс |
| Волtage | 120 Волтс |
| Осветљеност | 2400 лумена |
| Ефикасност | 100 ЛМ/В |
| Температуре боје | 3000K (топло бела), 4000K (неутрално бела), 6500K (хладно бела) |
| Посебна карактеристика | Dimmable (compatible with most Triac dimmers) |
| Унутрашња/спољна употреба | Само за унутрашњу употребу |
| Тежина артикла | 3.24 фунте (1.47 килограма) |
5. Водич за инсталацију
Follow these steps to install your TALOYA LED Ceiling Light. Ensure power is disconnected at the circuit breaker before starting.
Step 1: Prepare the Mounting Base Plate
Identify the correct orientation for the mounting base plate. The side marked "Note: This side must face downwards" should be oriented towards the floor, away from the ceiling.
Слика 1: Завршеноview корака инсталације.
The base plate is designed for compatibility with most standard junction boxes.
Figure 2: Base plate compatibility with junction boxes.
Step 2: Secure the Base Plate
Attach the mounting base plate to your electrical box using the provided mounting screws. For solid ceilings, use tapered tapping screws. For wire boxes, use flat head screws. Ensure the base plate is securely fastened.
Step 3: Connect Electrical Wires
Connect the AC cables (Live/Neutral) from your ceiling to the corresponding wires on the light fixture using the provided wire nuts. Since the lamp is made of insulating plastic, a ground wire connection is not required.
Корак 4: Инсталирајте расветно тело
Carefully push the wire nuts and excess wiring into the electrical box. Align the light fixture with the secured base plate and rotate it clockwise until it snaps firmly into place. Ensure it is secure and flush against the ceiling.
Figure 3: Installed ceiling light fixture.
6. Операција
6.1 Color Temperature Selection
The TALOYA LED Ceiling Light offers three color temperature options: 3000K (Warm White), 4000K (Neutral White), and 6500K (Cool White). To select your desired color temperature, locate the small switch on the back side of the light fixture. Slide the button to choose between the available options before final installation or by carefully unscrewing the fixture to access the switch.
Figure 4: Color temperature selection switch.
6.2 Функција затамњивања
This fixture is dimmable and compatible with most Triac dimmers available in the North American market. Connect the light fixture to a compatible dimmer switch (not included) to adjust the brightness from 10% to 100%.
Figure 5: Dimmable brightness demonstration.
7. Одржавање
- Чишћење: Disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.
- Трајност ЛЕД диоде: The integrated LED module is designed for long-term use (over 3 years under normal usage of 8 hours per day). It does not require bulb replacement.
- инспекција: Periodically check the fixture for any signs of damage or loose connections. If any issues are found, consult a qualified electrician.
КСНУМКС. Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Светло се не пали | No power supply; Loose wiring; Faulty switch | Check circuit breaker; Verify wire connections; Test switch functionality. |
| Светло неочекивано трепери или се затамни | Incompatible dimmer switch; Loose wiring; Power fluctuations | Ensure dimmer is Triac compatible; Check wire connections; Consult electrician for power issues. |
| Нетачна температура боје | Color temperature switch set incorrectly | Access the switch on the back of the fixture and adjust to the desired setting. |
If troubleshooting steps do not resolve the issue, please contact TALOYA customer support.
9. Гаранција и подршка
TALOYA provides a 2 година гаранције for this product. For any quality-related issues, a free replacement will be arranged based on the original purchasinг доказ.
For questions, concerns, or technical support, please do not hesitate to contact the TALOYA After-sales service team. They are available to provide quick solutions and assistance.
Contact information for support is typically found on the product packaging or the official TALOYA webсајту.