1. Безбедносне информације
Please read all safety instructions before operating this device. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Ensure the power supply matches the device's requirements (120VAC, 60Hz).
- Do not exceed the maximum load of 15A/1875W.
- Keep the controller and probe away from water or excessive moisture, except for the waterproof probe tip.
- Не растављајте нити модификујте уређај. Сво сервисирање препустите квалификованом особљу.
- Always unplug the controller from the power outlet before cleaning or performing maintenance.
- This device is equipped with overload protection. In case of an overload, the power output and screen display will automatically cut off to prevent damage.
Image 1.1: Overload Protection Feature. This image shows the iPower temperature controller with a visual indicator pointing to the power cord, emphasizing the 'OVERLOAD PROTECTED' text. It explains that in case of an overload, the power output and screen display will be cut off.
2. Производ је готовview
The iPower Professional Digital Heating and Cooling Temperature Controller is designed to maintain precise temperature control for various applications, including seed germination, reptile habitats, brewing, and greenhouse environments. It features dual outlets for simultaneous heating and cooling device control, a digital display, and a waterproof temperature probe.
2.1 Садржај пакета
- iPower Digital Temperature Controller (Model GLCTRLHEATCOOL15)
- Waterproof Temperature Probe
- Упутство за употребу
2.2 Кључне карактеристике
- Двострука функционалност: Controls both heating and cooling devices simultaneously.
- Висока тачност: Professional-grade waterproof temperature probe.
- Дигитални екран: Dual readouts for measured (PV) and set (SV) temperatures.
- Избор јединице: Supports both Fahrenheit (°F) and Celsius (°C).
- Лако руковање: Intuitive 6-button interface.
- Заштита од преоптерећења: Enhances safety by cutting power during overloads.
Слика 2.1: Предња страна View of the iPower Temperature Controller. This image displays the main unit of the iPower temperature controller, showing its digital display, control buttons, heating and cooling outlets, power cord, and the attached temperature probe.
Image 2.2: Independent Heating & Cooling Functionality. This image illustrates how the controller can manage both a heating device (represented by a sun icon) and a cooling device (represented by a snowflake icon) simultaneously through its dedicated outlets.
Image 2.3: LED Display and Power Indicators. This image highlights the clear and easy-to-read LED display of the controller, showing temperature readings and indicating the status of heating and cooling operations.
Image 2.4: Wide Range of Uses. This image displays various applications for the iPower temperature controller, including aquariums, greenhouses, seed germination, and reptile enclosures, demonstrating its versatility.
3. Подешавање
3.1 Почетно смештање
Place the controller in a dry, stable location. Ensure adequate ventilation around the unit.
3.2 Монтажа (опционо)
The controller can be mounted on a wall using the two keyholes located on the back of the unit. Securely fasten the controller to a suitable surface using appropriate screws (not included).
Image 3.1: Wall Mounting Option. This image shows the iPower temperature controller mounted on a wall, highlighting the keyholes on the back for secure installation.
3.3 Повезивање сонде
Insert the temperature probe into the designated port on the controller. Position the probe in the environment where temperature monitoring and control are required. Ensure the probe tip is fully immersed or positioned correctly for accurate readings.
3.4 Повезивање уређаја
- Plug your heating device into the outlet labeled 'HEATING'.
- Plug your cooling device into the outlet labeled 'COOLING'.
- Plug the controller's power cord into a standard 120VAC, 60Hz electrical outlet.
4. Упутство за употребу
The controller features a 6-button interface for easy programming:
- СНАГА: Укључује/искључује уређај.
- УП: Increases values or navigates menus.
- ДОЉЕ: Decreases values or navigates menus.
- КОМПЛЕТ: Enters programming mode or confirms settings.
- ЦФ/СТ: Toggles between Celsius and Fahrenheit, or enters specific settings.
- ЦЛР: Clears current input or exits programming mode.
4.1 Укључивање/искључивање
Притисните тастер ПОВЕР button to turn the controller on. Press and hold the ПОВЕР button for approximately 3 seconds to turn it off.
4.2 Очитавања на екрану
- PV (Process Value): Displays the current measured temperature by the probe.
- SV (Подешена вредност): Displays the target temperature you have set.
4.3 Setting Temperature Units (°F/°C)
Притисните тастер ЦФ/СТ button to toggle the temperature display between Fahrenheit (°F) and Celsius (°C).
4.4 Setting the Target Temperature (SV)
- Притисните тастер СЕТ button once. The SV display will begin to flash.
- Користите UP or ДОВН дугмад да бисте подесили циљану температуру на жељену вредност.
- Притисните тастер СЕТ button again to confirm the setting and exit programming mode.
4.5 Heating and Cooling Operation
Once the target temperature (SV) is set, the controller will automatically activate the heating or cooling outlet based on the current measured temperature (PV) and the set differential (hysteresis, typically pre-set). If PV is below SV, the heating outlet activates. If PV is above SV, the cooling outlet activates.
5. Одржавање
5.1 Чишћење
- Always unplug the controller before cleaning.
- Обришите површину контролера меком, сувом крпом. Не користите абразивна средства за чишћење или раствараче.
- The temperature probe can be cleaned with a damp cloth. Ensure it is dry before re-inserting into any environment.
5.2 Складиштење
Када се не користи, чувајте контролер на хладном и сувом месту, даље од директне сунчеве светлости и екстремних температура.
КСНУМКС. Решавање проблема
If you encounter issues with your iPower Temperature Controller, refer to the following common problems and solutions:
| Проблем | Могући узрок | Решење |
|---|---|---|
| Контролер се не укључује. | Нема напајања; Дугме за напајање није правилно притиснуто. | Ensure the controller is securely plugged into a live outlet. Press and hold the ПОВЕР дугме на 3 секунде да се укључи. |
| Controller does not turn on automatically after a power outage. | This model requires manual restart after power interruption. | После напајањаtage, manually press and hold the ПОВЕР button for 3 seconds to restart the unit. |
| Heating/Cooling device not activating. | Device not plugged in; Temperature not within activation range; Controller overload. | Check if the device is properly plugged into the correct outlet. Verify the set temperature (SV) and current temperature (PV). Check for overload condition. |
| Нетачна очитавања температуре. | Сонда неправилно постављена; Оштећена сонда. | Ensure the probe is correctly positioned and clean. If readings remain inaccurate, the probe may need replacement. |
| Controller trips circuit breaker. | Overload; Faulty device connected. | Осигурајте укупан ватtage of connected devices does not exceed 1875W. Test devices individually to identify a faulty one. |
7. Спецификације
| Феатуре | Спецификација |
|---|---|
| Број модела | GLCTRLHEATCOOL15 |
| Ратед Волtage | КСНУМКСВАЦ, КСНУМКСХз |
| Мак Лоадинг | 15A / 1875W, 1/2HP, TV-5 |
| Probe Working Temperature | -58 до 230°Ф (-50 до 110°Ц) |
| Controller Working Temperature | -40 до 176°Ф (-40 до 80°Ц) |
| Димензије производа | 8.27 к 6.15 к 2.36 инча |
| Тежина артикла | 1.45 фунти |
| Дисплаи Типе | ЛЦД |
| Дужина кабла сонде | 75 инча (приближно) |
| Дужина кабла за напајање | 75 инча (приближно) |
Image 7.1: Controller Dimensions and Cable Lengths. This image provides a visual representation of the controller's physical dimensions (4.55" x 4.55" x 1.6") and the lengths of both the probe cable and power cable (75" each).
Image 7.2: Temperature Working Ranges. This image visually represents the working temperature ranges for both the controller (-40 to 176°F) and the probe (-58 to 230°F).
8. Гаранција и подршка
iPower products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official iPower webсајт. Молимо вас да сачувате доказ о куповини за потребе гаранције.
For further assistance, you may contact iPower customer service through their official channels. Details are typically found on the product packaging or the manufacturer's webсајту.