KPS CONFORTLINE CRONO RF Digital Programmable Radio Frequency Thermostat

1. Увод

The KPS CONFORTLINE CRONO RF is a digital programmable thermostat designed for heating or air conditioning systems. It features a wireless communication system between its emitter and receiver units, offering flexible placement and remote temperature control. This manual provides essential information for the safe and efficient operation of your thermostat.

2. Безбедносне информације

• Installation should only be performed by qualified personnel to prevent electrical hazards.
• Уверите се да је главно напајање искључено пре било каквих радова на инсталацији или одржавању.
• Не излажите уређај екстремним температурама, влажности или директној сунчевој светлости.
• Држите уређај даље од воде и других течности.
• Use only the specified battery type for the emitter unit.

3. Садржај пакета

Please check that all components are present in the package:

• 1 x Emitter Unit (Thermostat)
• 1 к пријемник
• Прибор за монтажу (шрафови, зидни типлови)
• Упутство за употребу

Напомена: 2 AA 1.5V batteries for the emitter unit are није укључено.

4. Подешавање

4.1. Монтирање јединица

The KPS CONFORTLINE CRONO RF system consists of two main units: an emitter (thermostat) and a receiver. The emitter unit is designed for surface wall mounting, allowing flexible placement within your living space. The receiver unit should be connected to your heating system (boiler) and a 230V mains power supply.

The maximum communication range between the emitter and receiver is 100 meters in open air and over 30 meters inside buildings, thanks to its radio frequency communication.

Figure 1: KPS CONFORTLINE CRONO RF Emitter (left) and Receiver (right) Units.

4.2. Powering the Units

• Emitter Unit: Insert 2 AA 1.5V batteries (not included) into the battery compartment on the back of the emitter unit.
• Пријемна јединица: Connect the receiver unit to a 230V 50/60Hz mains power supply and to your heating system (e.g., gas boiler or electric heating). Wiring requires professional electricians.

Слика 2: Позади view of the Receiver Unit with wiring terminals. Professional installation is recommended.

4.3. Initial Pairing (if necessary)

The emitter and receiver units are typically pre-paired at the factory. If they do not communicate, refer to the detailed pairing instructions in the full product manual or contact customer support.

5. Упутство за употребу

The emitter unit features an LCD screen with backlighting and a selection dial for easy navigation and temperature adjustment.

5.1. Дисплеј и контроле

The LCD screen displays ambient temperature, set temperature, time, and current operating mode. Use the selection dial to navigate menus and adjust settings.

5.2. Радни режими

The thermostat offers multiple operating modes to suit your needs:

• Аутоматски режим: Follows the programmed schedule for temperature control.
• Ручни режим: Allows you to set a constant temperature that overrides the schedule until changed.
• Привремени ручни режим: Sets a temporary temperature that will revert to the automatic schedule after a set period.
• Режим празника: Maintains a specific temperature for an extended period, ideal for when you are away.

5.3. Програмирање

The thermostat supports configurable programming with 6 daily intervals. Two pre-configured programs are included for quick setup. Refer to the full manual for detailed instructions on customizing your heating schedule.

5.4. Подешавања екрана

The thermostat's LCD display is backlit for clear visibility. You can adjust settings related to the display, such as keeping it always on, if desired.

6. Одржавање

• Clean the thermostat's surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Replace the emitter unit batteries when the low battery indicator appears on the display.
• Ensure the receiver unit's power connection is secure.

КСНУМКС. Решавање проблема

• Без дисплеја/напајања: Check batteries in the emitter unit. Ensure the receiver unit is properly connected to the 230V mains supply.
• No Communication (RF): Verify that both units are powered. Ensure they are within the specified communication range. Re-pair the units if necessary (refer to the full manual).
• Нетачно очитавање температуре: Ensure the emitter unit is not placed near heat sources or in direct sunlight. Calibrate the temperature if an offset is detected (refer to the full manual).
• Систем грејања не реагује: Check the wiring connections between the receiver unit and the boiler. Ensure the thermostat is in an active heating mode (e.g., Manual or Automatic with a set temperature above ambient).

8. Спецификације

9. Гаранција и подршка

This KPS product is covered by a standard manufacturer's warranty. For detailed warranty terms and conditions, please refer to the documentation provided with your purchase or visit the KPS official webсајту.

For technical support, troubleshooting assistance, or any questions regarding your KPS CONFORTLINE CRONO RF thermostat, please contact KPS customer service through the contact information provided in your product packaging or on the official KPS webсајту.