LEXON LL128N Fingerprint Padlock User Manual

1. Готовоview

This manual provides detailed instructions for the LEXON LL128N Fingerprint Padlock. Please read this manual carefully before using the product to ensure proper operation and longevity. This biometric padlock offers secure, keyless access with advanced features for various applications.

2. Карактеристике производа

• Biometric Fingerprint Recognition: Securely unlock with your fingerprint. Supports up to 10 registered users.
• Издржљива конструкција: Made from stainless steel and zinc alloy for enhanced security.
• Отпоран на временске услове: IP65 waterproof and dustproof rating, suitable for both indoor and outdoor use.
• Дуготрајна батерија: Up to 3000 unlocks on a single charge. Offers a standby time of up to 12 months.
• УСБ-Ц пуњење: Conveniently rechargeable via a Type-C USB cable (included). Full charge in approximately 1.5 hours.
• Елегантан дизајн: Designed by Guillaume Delvigne, available in multiple colors.

Image: The LEXON Nomaday Lock showcasinњегов дизајн и доступне боје.

3. Садржај пакета

• LEXON LL128N Fingerprint Padlock
• УСБ-Ц кабл за пуњење
• Упутство за употребу

4. Подешавање

4.1 Initial Fingerprint Registration (Administrator)

Upon first use, the padlock is in default status, meaning any fingerprint can unlock it. You must register the first two fingerprints as administrators. These first two fingerprints are crucial for managing additional users and resetting the device.

1. Press and hold your finger on the fingerprint sensor until the плаво светло illuminates. Release your finger.
2. Тхе зелено светло will illuminate. Place your finger on the sensor repeatedly from various angles until the green light turns off. This completes the registration of the first administrator fingerprint.
3. Док је зелено светло is still illuminated, use a different finger and repeat step 2. This registers the second administrator fingerprint.

After completing these 3 steps, the first two fingerprints are successfully set as administrators. The padlock will now only unlock with these registered fingerprints.

4.2 Registering Additional Fingerprints (Users 3-10)

To add more user fingerprints (up to a total of 10), an administrator fingerprint is required.

1. Притисните и држите ан прст администратора on the sensor until the плаво светло illuminates. Release the finger.
2. Тхе зелено светло will illuminate. Have the new user place their finger on the sensor repeatedly from various angles until the green light turns off. This registers the new user's fingerprint.

Repeat these steps for each additional user, up to a maximum of 10 fingerprints in total.

4.3 Deleting All Fingerprints (Factory Reset)

To delete all registered fingerprints and restore the padlock to its factory default state (any fingerprint can unlock), follow these steps:

1. Place an прст администратора on the sensor and hold it. The плаво светло will illuminate, then turn црвена. Continue holding.
2. After the red light illuminates, the зелено светло will flash once. Release your finger immediately after the green light flashes.

All fingerprints are now deleted, and the lock is reset to its default state. Any fingerprint can now unlock the device until new administrator fingerprints are registered.