Gladen ATM4 Active Terminal Module - 4 Ohm User Manual

1. Производ је готовview

The Gladen ATM4 is an active terminal module designed to integrate an amplifier directly into a subwoofer enclosure, effectively converting any passive subwoofer into an active one. This module provides 200W RMS power output and features both high-level and low-level inputs, remote detection, and an adjustable low-pass filter. It is engineered for a 4 Ohm connection, offering a compact and efficient solution for enhancing your audio system.

2. Шта је у кутији

Upon unpacking your Gladen ATM4, please ensure all components are present and undamaged.

• 1 x Gladen ATM4 Active Terminal Module

3. Карактеристике

The Gladen ATM4 Active Terminal Module incorporates several key features for optimal performance and integration:

• Излазна снага 200В РМС: Provides robust amplification for subwoofers.
• Улази високог и ниског нивоа: Offers versatile connection options for various audio sources.
• Remote Detection: Automatically turns the module on/off with the audio signal.
• Нископропусни филтер: Adjustable filter to optimize subwoofer frequency response.
• Connection for RTC.2 Pot: Allows for an optional remote level control.
• Molex Connector: Ensures secure and short-circuit protected power connections.
• 4 Ohm Compatibility: Designed for use with 4 Ohm subwoofers.

4. Спецификације

5. Безбедносне информације

Please read and understand all safety instructions before installing or operating the Gladen ATM4 module. Failure to follow these guidelines may result in injury or damage to the product or other equipment.

• Препоручена професионална инсталација: Installation of car audio components can be complex. If you are unsure about any part of the installation process, seek assistance from a qualified professional.
• Искључите напајање: Always disconnect the vehicle's battery negative terminal before making any electrical connections to prevent short circuits and electrical shock.
• Правилно ожичење: Ensure all wiring is correctly routed and secured to prevent damage from pinching, abrasion, or heat. Use appropriate gauge wires for power and speaker connections.
• вентилација: Ensure the module is installed in a location with adequate ventilation to prevent overheating. Do not cover the module or restrict airflow.
• Избегавајте влагу: Do not expose the module to water, moisture, or excessive humidity.
• Correct Impedance: Ensure your subwoofer's impedance matches the module's specified 4 Ohm output to prevent damage.

6. Подешавање и инсталација

The Gladen ATM4 is designed to replace a standard passive terminal cup on a subwoofer enclosure. Follow these steps for installation:

1. Припрема: Disconnect the vehicle's battery. Carefully remove the existing terminal cup from your subwoofer enclosure.
2. Монтажа: Insert the Gladen ATM4 module into the opening. Secure it using the provided screws, ensuring a tight seal to prevent air leaks.
3. Веза за сабвуфер: Connect the internal speaker wires from your subwoofer driver to the appropriate terminals on the ATM4 module. Ensure correct polarity (+ to + and - to -).
4. Прикључак за напајање: Connect the main power (MAINS) and ground wires to the Molex connector. The ATM4 features remote detection, so a separate remote turn-on wire is typically not required if using high-level inputs or a compatible low-level source.
5. Input Signal Connection:
   • Улаз високог нивоа: If your head unit does not have RCA outputs, connect the speaker-level outputs from your head unit or amplifier to the HIGH-level inputs on the ATM4.
   • Улаз ниског нивоа: If your head unit or amplifier has RCA outputs, connect them to the LOW-level (RCA) inputs on the ATM4.
6. Optional RTC.2 Connection: If using the optional Gladen RTC.2 remote level control, connect it to the RTC port on the module.
7. Завршне провере: Double-check all connections for security and correct polarity. Reconnect the vehicle's battery.

Image showing the Gladen ATM4 Active Terminal Module installed in a subwoofer enclosure, illustrating the external terminal plate and the internal module.

Front panel of the Gladen ATM4 Active Terminal Module, showing the LEVEL and FILTER controls, HIGH and LOW inputs, MAINS, and RTC connections.

Цлосе-уп view of the Gladen ATM4 module, highlighting the various input and output connections, including the Molex connector and RCA inputs.

7. Упутство за употребу

Once installed, the Gladen ATM4 module requires minimal operation. Adjustments are typically made during the initial setup phase.

• Контрола НИВОА: This knob adjusts the overall output level (volume) of the subwoofer. Start with the level set low and gradually increase it until the subwoofer blends seamlessly with your main speakers without overpowering them.
• FILTER Control: This knob adjusts the low-pass filter frequency. The low-pass filter allows only frequencies below the set point to pass through to the subwoofer, preventing it from playing higher frequencies that should be handled by your main speakers. Adjust this to achieve a smooth transition between your subwoofer and main speakers.
• Remote Detection: The ATM4 features automatic remote detection. When an audio signal is present on the high-level or low-level inputs, the module will power on. When the signal is absent, it will power off after a short delay.
• RTC.2 (Optional): If you have connected the optional RTC.2 remote level control, you can use it to conveniently adjust the subwoofer's output level from your listening position.

8. Одржавање

The Gladen ATM4 module is designed for reliable operation with minimal maintenance.

• Чишћење: Periodically wipe the exterior of the module with a soft, dry cloth to remove dust. Do not use harsh chemicals or abrasive cleaners.
• вентилација: Ensure that the area around the module remains clear to allow for proper airflow and prevent overheating.
• Везе: Повремено проверите све спојеве ожичења како бисте били сигурни да су безбедни и да немају корозије.

КСНУМКС. Решавање проблема

If you encounter issues with your Gladen ATM4 module, refer to the following troubleshooting guide:

10. Информације о гаранцији

The Gladen ATM4 Active Terminal Module is covered by a 1-годишња гаранција произвођача од дана куповине. Ова гаранција покрива недостатке у материјалу и изради при нормалној употреби.

The warranty does not cover damage resulting from improper installation, accident, misuse, abuse, neglect, unauthorized modification, or normal wear and tear. For warranty claims, please retain your proof of purchase and contact your authorized Gladen retailer or the manufacturer's customer support.

11. Подршка

For further assistance, technical support, or inquiries regarding your Gladen ATM4 Active Terminal Module, please refer to the following resources:

• Gladen Official Webсајт: Visit the official Gladen webсајт за информације о производу, честа питања и контакт податке за подршку.
• Овлашћени продавац: Contact the retailer from whom you purchased the product for local support and service.